Drill Bits

The CWCL TCT series Pilot Pins are compatible with Rotabroach TCT cutters from 66mm to 100mm diameter and 50mm depth of cut.

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 5 x 50 mm

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.8 mm x 400 mm.Additional Information:• Diameter: 8.0mm• Overall Length: 400mm• Pack Qty.: 1

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank. Contents: 1 x Draper Expert Flat Wood Bit, 38mm

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Bosch 2608587163 CYL-9 Ceramic Tile Drill Bit 7mm The Bosch 2608587163 drill bits are suitable for drilling through soft-to-medium hard tiles thanks to their simple flute-less design. They are compatible with both corded or cordless non-impact drills with a cylindrical shank system, and allow for dry drilling without lubrication. This makes working effortless and convenient for optimum productivity. In addition to this, they are extremely durable and long lasting. Features:
- Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient
- Simple flute-less design makes these bits suitable for drilling through soft-to-medium hard tiles
- The …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 200mm Diameter: 10mm Flute Length: 126mmAdditional Information:• …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 300 mm.Additional Information:• Diameter: 10.0mm• Overall Length: 300mm• Pack Qty.: 1

The Rotabroach RA356 pilot pin is compatible with Rotabroach TCT cutters from 18mm - 65mm diameter with 50mm depth of cut and Rotabroach Imperial cutters from 11/16" - 2 3/8" diameter with 2" depth of cut.

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 12 • Overall Length Metric: 152

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features & Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

• Tungsten carbide tipped with optimized geometry for drilling concrete and stone • Vacuum brazed tips for durability • Ground flutes designed for optimum debris removal • SDS-plus shank • Diameter: 12 mm • Working length: 140 mm • Total length: 200 mm Specifications: Diameter = 12mm Working length = 140mm Overall length = 200mm

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Dormer A225 HSS Centre Drill is a precision tool designed for creating accurate centre holes in workpieces, essential for facilitating subsequent drilling operations. Made from High-Speed Steel, this centre drill offers exceptional durability and performance, capable of handling various materials including steel, stainless steel, and non-ferrous metals. Its high-quality construction ensures excellent resistance to wear and heat, maintaining sharpness and precision even under demanding conditions. The 60-degree included angle of the centre drill guarantees precise centering and optimal hole preparation, reducing the risk of tool deflection and ensuring accurate alignment for follow-up drilling.…