Drill Bits

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

Expert CYL-9 Multi Construction Drill Bit - start holes accurately with a specially-designed centering tip The Bosch 2608900619 has a 7mm diameter, working length of 90mm and an overall length of 150mm with a straight shank. This drill bit is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming - unless you have the EXPERT MultiConstruction Drill Bit. The Bosch EXPERT CYL-9 MultiConstruction Cylindrical Drill Bit is the one drill bit that should always be in your …

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 25 x 152mmAdditional Information:• Diameter: 25mm• Overall Length: 152mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 152 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Designed with efficiency in mind, the innovative flute design promotes swift material removal and efficient debris evacuation, reducing the risk of bit binding and ensuring a smooth drilling experience. The robust construction of the bit ensures it can withstand the demands of tough applications, maintaining its sharpness and performance over time. The carbide tip ensures durability and longevity, making it the ideal tool for drilling into concrete, brick, stone, and other masonry materials. Features & Benefits • Flat carbide tip design for less breakage in the hardest of materials • Four flute design removes debris quickly for fast drilling • Hardened steel body for maximum strength …

Metric-sized high speed steel bits with Titanium added providing extra strength and durability. Display packed.

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Dewalt DT4773 Extreme Impact Flatwood Drill Bit 28mm x 152mm The Dewalt DT4773 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 28mm 
- Length: 152mm
- Pack Quantity: 1

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 6 Plugs (7mm)Additional Information:• Type: Plug Cutter• Screw Compatibility: No.6

Dewalt DT9527 SDS+ Extreme Drill Bit 7.0 x 200 x 260mm The Dewalt DT9527 SDS+ Extreme drill bit is 7mm in diameter with a working depth of 200mm. It has great performance in terms of speed, life, and endurance. Perfect for drilling materials such as concrete, masonry, stone and brick thanks to its superior carbide grade construction and hardened body. The new tip design ensures better bit penetration for optimum drilling performance and precision. Features:
- Superior carbide grade for long life and greater durability
- Optimised flute design allows efficient debris removal
- Hardened body for extra strength and reduced breakage
- New tip design ensures better bit penetration, longer …

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 200mm Diameter: 6.5mm Flute Length: 126mmAdditional Information:• …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 28mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Octagonal shank chisel from selected steel with polished cutting edge. Display packed.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

• HSS Roll forged drill bits manufactured to DIN 338.• Suitable for general workshop use in both hand and pillar drill applications.• Sizes: ø2, 3, 4, 5, 6, 8mm.• Six popular sizes supplied in storage case.HSS Roll forged drill bits manufactured to DIN338. Suitable for general workshop use in both hand and pillar drill applications. Six popular sizes supplied in storage case.Technical Specification:Contents: ø2, 3, 4, 5, 6, 8mmNett Weight: 0.12kgDimensions: Length: 20mm x Height: 165mmWeight: 0.116KgWarranty: Consumable

The HSS Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through holes and pocket holes. This extremely sharp drill bit with a centring tip allows for exact positioning of the hole. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, its two flutes prevent materials from clogging the hole and easily remove debris. This drill bit is suitable for use on soft and hard wood as well as for laminated boards and MDF. Made of HSS (high-speed steel), this Brad Point Drill Bit is ground from solid metal. Its hexagonal shank system allows for fast and tool-free drill bit changes. It has a hexagonal shank system and is …

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. Features & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20612-QZ • Diameter: 8mm • Quantity: 1

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 24 x 152mmAdditional Information:• Diameter: 24mm• Overall Length: 152mm• Pack Qty.: 1

• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø19 x 225mmDimensions: Length: 20mm x Height: 225mmWeight: 0.195KgWarranty: Consumable

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 11mm • Length: 210mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP350LS Pre Pack HSS Jobber Drills Long Series 3.5mm have the following specifications:Diameter: 3.5mm. Overall Length: 112mm. Pack quantity: 2.Additional Information:• …

Expert Quality, high speed steel twist drills. Display packed.