Drill Bits

• Fully ground HSS Cobalt drill bit manufactured to DIN 338.• 5% Cobalt helps to increase life of drill bit.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf clearance.• Suitable for drilling high carbon steel and stainless steel.• High-density case for safe storage.Fully ground HSS Cobalt drill bit manufactured to DIN 338. 5% Cobalt gives increased heat hardness which helps extend the life of the drill bit. 135° Split point is self-centring which helps to reduce thrust and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for drilling high carbon and stainless steel. High-density case for safe storage.• Fully ground HSS Cob…

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

This bench-mounted compact drill bit sharpener offers a quick, simple and effective way to sharpen drill bits. It is capable of sharpening points to a 118 degree angle to help make drilling with the bit easier. Suitable for 3-13mm drill bits made from HSS titanium, cobalt, carbon steel and split point bits. Features: Sharpens points to a 118 degree angle Suitable for 3-13mm drill bits For use with most drill bits - HSS titanium, cobalt, carbon steel and split point bits Bench mounting Specifications: Dimensions: H:24.0 x W:20.0 x D:17.0 cm Colour: Blue Guarantee:1 year Material: Metal Model Number: 98518

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Features & Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry delivers maximum hole concentricity for better fixing retention • Optimised four flute design allows …

DeWalt Extreme SDS Plus hollow drill bits have an Airlock compatible dust extraction port built into them which is simply connected to an external dust extractor to suck out the drilling dust while the bit is in use. Compared to some alternative dust extraction solutions this frees up weight on the tool for reduced fatigue and can be easily swapped between machines as required. Integrated dust extraction helps prevent workers from being exposed to harmful dusts and saves time required for cleaning out holes as the dust is simply sucked away whilst the hole is drilled. Specifications • Diameter: 14mm

These ultra-sharp bevel edge chisels come pre-sharpened ready for use and are 50% stronger than the previous Stanley DynaGrip chisels The 2-16-269 is a 5 piece bevel edge chisel set from Stanley. These Thru Tang Chisels are 50% stronger than the previous Stanley DynaGrip chisels thanks to their new design and blades which are made from quality chrome alloy steel. Their ergonomic soft-grip handles ensure maximum comfort upon use and lacquered coating prevents rusting. Designed for intensive use. Features:
- 50% stronger than old DynaGrip Pro Chisel on handle side impact test
- Superior Thru Tang design - 50% stronger handle for extra reassurance and durability
- Steel strike cap - can …

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 26 mm

• HSS Dura 50 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 50 mm.Specifications:Cutting depth: 50 mmBore Ø: 27 mm

• HSS Dura 25 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 30 mm

• HSS Dura 25 core bit with 3/4 in Weldon holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 31 mm

• HSS Dura 25 core bit with QuickIN holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 30 mm

• HSS Dura 25 core bit with QuickIN holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.Specifications:Cutting depth: 25 mmBore Ø: 31 mm

• HSS Nova 50 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 50 mm. Specifications: Cutting depth: 50 mm Bore Ø: 46 mm