Drill Bits

The DT4910 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 6.8mm • Length: 109mm • Working length: 66mm • Pack Quantity: 1Features & Benefits

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 152 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 4.2 x 45 mm

Maximum service life
Excellent machining performance
Ideal quality

The CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles. Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient. Additionally, it has a simple flute-less design, which is especially suitable for drilling through soft-to-medium hard tiles. Drill without impact at low speeds. The bit is compatible with corded or cordless non-impact drills with a cylindrical shank system. Pack of 1 • Standard for Drilling in Tiles • CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles • Dry drilling without lubrication for convenient use • Simple flute-less design is especially suitable for drilling …

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

These DeWalt Extreme Metal Drill Bits are suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm². Strong central core with tapered web that greatly reduces breakage and no walk tip for easy positioning on curved surfaces. Features & Benefits • Suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm² • An innovative tapered web greatly reduces breakage with a gold ferrous oxide coating preventing overheating for longer bit life • Three flat sides eliminate slipping in the chuck • Permanent size markings located above shank for increased visibility Specifications • Head Type: HSS • Diameter: 10.5mm • Working …

A must for every Engineers toolbox! StepPower is the perfect tool for precise drilling with a cordless screwdriver or handheld drill without punching or pre-drilling. The innovative step geometry ensures that the material is gradually removed until the desired diameter is achieved. This makes for effortless drilling without exerting force and saves battery power. The stepped twist drill allows the drilling of virtually burr-free holes in all common materials such as hardwood, plastic or metal. The tool also easily drills composite materials. Suited for cordless drills.This makes StepPower an indispensable all-rounder for every workshop. Features & Benefits • 118° Point geometry with …

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Sold loose.

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 12 Plugs (11.5mm)Additional Information:• Type: Plug Cutter• Screw Compatibility: No.12

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.8 mm x 300 mm.Additional Information:• Diameter: 8.0mm• Overall Length: 300mm• Pack Qty.: 1

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

Unique centering tip: Fluid free point precision drilling, specially sanded shoulder cuts, mills full and circular holes with clean edges
Core reinforcement: Continuously increasing core diameter in the shaft direction for highest breakage stability especially in free use
Size marking: corrosion protection, placed outside the tensile area, ensuring continuous good readability. Non-slip shaft: 3 milled tensile surfaces prevent the drill from turning in the liner and optimum strength transmission
Delivery includes: 1 x metal drill bit Extreme HSS-Co, 8 x 117 x 72 mm, for use in drills (battery and cable)

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 7mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The Blue Spot Brick Bolsters are manufactured from induction hardened, drop forged steel with a heavy-duty grip.Size: 57mm (2.1/4in).Additional Information:• Width: 57mm

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB17.5Technical Specification:Size: ø17.5 x 190mmDimensions: Length: 20mm x Height: 210mmWeight: 0.205KgWarranty: Consumabl…

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 8mm • Length: 210mm • Working Length: 150mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …