Drill Bits

Faithfull Plug Cutters are used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance, the power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an accurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 12 Plugs (11.5mm)Additional Information:• Type: Plug Cutter• Screw Compatibility: No.12

Blades manufactured from carbon steel hardened and tempered with blade guards. PVC oval handles. Contents: 1 x Bevel Edge Wood Chisel, 19 x 120mm

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 16mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 152 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 2.5mm • Length: 57mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

This drill bit has a cylindrical shank system. The Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through-holes and pocket holes. Its extremely sharp drill bit with a centring tip allows for exact hole positioning. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, the two flutes prevent material from clogging the hole and provide good material removal. This drill bit is suitable for use on soft and hard wood. Pack of 1 • Precise Drilling in Wood • Brad Point Drill Bit offers precise drilling in soft and hard wood • Extremely sharp drill bit with a centring tip allows for exact positioning …

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The DT4911 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 7mm • Length: 109mm • Working length: 69mm • Pack Quantity:1

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 14mm • Length: 200mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

DeWalt's Extreme series Tri-Flute bits are impact rated with 1/4" hex shanks, making them suitable for use in impact drivers as well as all standard drills with a jawed chuck. They can be used for drilling holes up to 100mm deep into wood with corded and cordless machines. Specifications • Drilling Diameter: 22mm • Total Length: 152mm Please note 13mm bit is shown for illustration purposes only.Features & Benefits• Impact rated: suitable for use with impact drivers • Quick-change 1/4" hex shanks suitable for use in a wide range of machines • Tri-flute tapered design for faster removal of wood chips with less binding • Three cutting spurs for cleaner, faster holes …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick. The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris. Size 230 x 5mm (9 x 3/16in).

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank. Contents: 1 x Draper Expert Flat Wood Bit, 30mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These pilot pins are compatible with Rotabroach M2 long imperial cutters from a 7/16 to 11/16 diameter.

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.This IRWIN® Speedhammer Quad Drill Bit has …

Octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied with one replaceable comb scutch. Generally in accordance with BS3066 Contents: 1 x Scutch Holding Chisel, 25 x 200mm (Sold Loose)

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 300mm• Pack Qty.: 1

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 8mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …