Projector Mounts

Projector ceiling mount with variable distance between ceiling: 63-100 cm - maximum load capacity: 25kg - colour: silver- projector mount for ceiling mounting
Arm reach between 14cm & 35.5cm - Reach of arms can be adjusted to 35.5cm without additional expansion! - Also for large & heavy projectors!
Tiltable in all directions by 15 ° - available in different sizes and colours - 4-point holder is compatible with 99% of all common projectors
Simple height adjustment for greater ceiling clearance - cable routing in the pipe possible - Neat design fits in every room
Ideal bracket for home cinema, living room, conference room, office, school, university, exhibition centre - simple and safe ceiling m…

Triple monitor desk mount with support up to 27" monitors with height adjustable articulating arms

This monitor desk mount is designed to support up to three 27-inch displays creating an ergonomic multi-monitor setup that provides an extensive viewing area for productivity. The mechanical spring-assisted arms allow multiple adjustment to suit different ergonomic needs.

Top-Down Installation

The unique top-screw desk clamp simplifies installation by enabling users to tighten the clamp from manually from above using a hex key or a hand drill eliminating the need to go under the desk. In addition the desk clamp is designed with an interchangeable C-clamp and grommet mount to accommodate …

StarTech.com .com Monitor Desk Mount, VESA 75x75/100x100, 27/30-inch Screens - Mounting kit (articulating arm) - adjustable arm - for LCD display - plastic, aluminium, steel - black - screen size: up to 30" - desk-mountable - TAA Compliant

Maximum load: up to 9 kg
Minimum/Maximum horizontal spacing: 75/100 mm
Minimum/Maximum vertical spacing: 75/100 mm
Adjustable tilt from +45° to -45°
Mounting to tabletop or in cable hole
Comes with a set of mounting screws
VESA standard: 75x75, 100x100 mm

Articulating Dual Monitor Arms with One-Touch Gas Spring Adjustment - ergonomic full motion and height adjustable
Turn your (home) office desk into an ergonomic environment and reclaim valuable workspace with this Manhattan monitor mount. Since it uses a gas spring to hold your displays these monitor arms only need a light touch to move your screen to the best viewing angle for you. The dual monitor VESA mount supports 17"" to 32"" displays with a weight capacity up to 9 kg (19.8 lbs.) each. An attractive black finish complements your workspace.

Light-touch height adjustment
A gas-spring cylinder makes it easy to raise or lower the display anywhere from 158 to 406 mm (6.2 to 16 in.) so …

Peerless MOD-P200 monitor mount accessory

Provides height adjustment in 1" increments
Notched design for adjustment without disassembly
Includes set screw for add stability
Consists of 1.5" NPT column, threaded on both ends
Use in combination with any Chief 1.5" NPT ceiling plate or other accessory

B-Tech SYSTEM 2 - Ceiling Mount with Ø50mm Adjustable Extension Pole - 0.6m to 1m Pole

Max. Load capacity: 10.5 kg. Max. VESA: 75x75, 100x100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 10.5 kg. Max. VESA: 75x75, 100x100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 20 kg (per screen). Max. VESA: 100 x 100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 20 kg (per screen). Max. VESA: 100 x 100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 20 kg (per screen). Max. VESA: 100 x 100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 20 kg (per screen). Max. VESA: 100 x 100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected

Max. Load capacity: 6 kg (per screen). Max. VESA: 100 x 100
Easy grip handle makes it easier to pull down and place
Sliding horizontal monitor bar: for easy, seamless monitor placement
Curved horizontal rail: for an improved viewing position
Cable clips keep cables organized and protected

Max. Load capacity: 7 kg (per screen). Max. VESA: 100 x 100
HEAVY DUTY STEEL CONSTRUCTION Provides solid and durable
Both grommet and table clamp mounting are possible
Continuous height adjustment for an optimal ergonomic position
Free-tilting design for multiple viewing angles of the monitor

Black ultra-flat projector ceiling mount for almost all projectors, only 62mm high - almost invisible
Practical quick release system for easy mounting & removal, min. 160 mm - max. 330 mm diameter of the moutning points
Stable aluminium bracket with 20 kg load capacity, with 3 or 4 enclosed arms, optionally longer arms available
Integrated anti-theft protection incl. Security lock, lockable ball joint for practical & uncomplicated alignment 15°, 360° rotation
Incl. 4x M3, M4, M5 & M6 x25mm screws for projector mounting, screws & dowels for ceiling mounting (concrete)

Projector Ceiling Mount / Maximum Load 15 kg / Ceiling Installation

Projector Ceiling Mount / Maximum Load 15 kg / Ceiling Installation

Multicel Pico is the world's smallest mount for pocket projectors up to 2kg - suitable for mini projectors with 1/4" tripod thread
variably adjustable with an adjustment range of +/- 15° tiltable & 360° swivel/rotate - multifunctional use with minimum ceiling clearance
Dimensions bracket: 70 x 50mm - minimum distance to ceiling with only: 3cm - load capacity: 2kg - incl. magnetic suspension for easy mounting & dismounting
stable and inconspicuous attachment for small beamers with magnetic suspension - simply remove your beamer and take it with you when needed!
ideal mount for home cinema, living room, conference room, office, school, university, exhibition centre - uncomplicated and secure ce…

Projector Ceiling Mount / Maximum Load 25 kg / Ceiling Installation

Epson ELPMB63 - Finger Touch Wall Bracket for ELPFT01

This mount allows easy installation and adjustment of the projector and easy change of the projection angle. Thanks to the adjustable angle of 120°, you can easily transfer the projected image from the wall to the ceiling. The flexible swivel mount fits a variety of environments such as home theaters, conference rooms, classrooms and more to suit your needs. Made from premium materials, this mount provides exceptional stability and durability, securely fixing the projector in the desired position.
Made in: China
Compatible with: Projector
Battery Operation: No
Type: Stand
Suitable for Brand: Xgimi
Colour: Grey
Suitable for: MoGo & Halo Series
Package Contents: Manual
Material: Aluminium …