Car Pumps & Compressors

All-metal design with braided delivery hose with "lock on" connector for tyres Special nozzle for footballs Rubber pad on foot pedal Display carton All-metal design with braided delivery hose with "lock on" connector for tyres Rubber pad on foot pedal Special nozzle for footballs

QSL-1/4-6 6mm OD-1/4" BSPT Swivelmale Stud Elbow Festo by Festo

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars commercial vehicles motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91273"

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.

A patented double-flow SAFE pump with air gauge for the inflation of the inflatable sup boards , with the possibility of inflating up to pressure 26psi. The pump has a slightly elongated shape , is very robust and has the aluminum shaft , these characteristics make it suitable to inflate a table in 4/5 minutes of time allowing a minimum of effort. CAPACITY_ 1.8+1.8L, max. pressure 26psi as DIN EN 16051 CHARACTERISTICS_ seals and anti-sand filter for long life of pump and sup board, high-airflow piston for an easier inflation, switch tap for double/single action.Specifications:- Dimention: 8 x 22 cm- Capacity: 500 ml- Material: Stainless steel

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.6mm Bore Straight Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• Model No. PCL6STModel No: PCL6ST:Brand: Sealey:Description: Straight Swivel - 6mm(1/4) Bore:Nett Weight: 0.035kg:PTDSEAPCL6ST

Maximum pressure up to 110 psi. Designed for inflating all type of bicycle tires with the ability to top up a car tire pressure from 26 psi to 36 psi. Maximum running time up to 15 mins at the optimum pressure range 30 to 55 psi Equipped with a bright LED light that allows you to working in dark environments. Noise level around 72 dB, similar to vacuum cleaner or hair dryer. It is relatively quieter when compare with other compressors in the market. High-capacity 2200mAh built-in rechargeable Li-ion battery, last longer after one charge.

Spray gun with gravity cup metal Spray brush with suction cup in metal design Tyre inflator with pressure gauge reading in bar and psi 4 m spiral air hose with quick coupling

This Airline Tyre Inflator with Pressure Gauge and twin connector features a heavy duty design with large easy to read gauge.- Two pressure scales 0-12 Bar & 0-174psi- BSP air supply fitting- 400mm rubber hose- Twin hold-on type connector- Comfort grip with non-slip sleeve on trigger- Gauge has protective rubber coverPTDCLA3082107

Fast Inflation: HOTO electric air compressor use 19mm large cylinder and high-power magneto enable super-fast inflation. With maximum pressure 150PSI. It can air up a car flat tyre in 8.5mins or a mountain bike flat tyre in just 129s. 5 Modes: With 4+1 modes, air pump can inflate cars, motorcycles, bikes, balls or manual control. Enabled by 0.1bar accurate digital tyre pressure measuring technique, it will auto-stop when reaching preset value, thus avoiding overinflation. USB-C Charging: The built-in 2500mAh capacity 7.2V battery allow for inflating 2.5 tyres if fully charged. The standard Type-C charging port is compatible with the charging cable of other smart devices, allowing for charging …

GB1021914-01 Quick Release Plug without Valve by Zoro Select

Easy to read, accurate and made from a robust aluminium tube with strong ABS plastic parts.

Open ended twin hold on tyre valve inflator connector. 1/4in. female thread. With an overall length of 250mm. For use on standard bore tyre valves. Features and Benefits Black colour coded handle to allow you to easily identify the correct tool (black for open ended) Suitable for use with MK3 tyre inflator, PCL wall gauges and PCL portable gauges

Hose and AdaptersFeatures:- For Inflatable Boats, Toys, Towables, Air Beds, Balls, and more- High Volume air flow- Inflates or deflates quickly- Comes with various valves and 4.5 hose1- 2 liter per stoke 2 PSI

Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges. Simple but effective thumb push-button quick release. Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose. 90° Angled connector for the difficult to reach valves.6mm Bore 90° Angled Swivel Tyre Inflator Clip-On Connector• Quick release coupling design with 360° swivel motion for tyre inflators wall gauges and portable gauges.• Simple but effective thumb push-button quick release.• Suitable to replace the connector on any tyre inflator with a 6mm(1/4) bore hose.• 90° Angled connector for the difficult to reach valves.• Model No. PCL6ATModel

TRUSTED: Suitable for all makes and models, the ResQ Inflator provides powerful and reliable tyre inflation for when needed. AirMan products are made to the highest OEM standards and approved by leading vehicle manufacturers SIMPLE: Our compressor uses a high quality, workshop specification analogue gauge to give accurate readings. No fancy digital gauges to go wrong or misread, just simple no-nonsense readings every time. CONVENIENT: Supplied with a compact case, the ResQ weighs only 855g and measures a small 150 x 140 x 61mm to fit in glove boxes, under seats or in the boot. The long power cable measures 3 meters long to provide access to all tyres EASY TO USE: Simply plug in the 12v connector,…

In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars commercial vehicles motorbikes and trailers and the easy to read 55mm gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 BAR (170psi). Supplied with a 1/4 BSP male adaptor.PTDDRPDIR91320"

Bosch Miscellaneous Part Original Manufacturer

Composite body and dial type gauge with rubber protector. Calibrated in bar/psi. Fitted with 500mm rubber hose and a twin push-on connector.Tyre Inflator with Twin Push-On Connector• Composite body and dial type gauge with rubber protector.• Range: 0-10bar/0-145psi.• Fitted with 500mm rubber hose and a twin push-on connector. • Model No. SA9312Model No: SA9312:Brand: Sealey:Inlet Size: 1/4BSP:Maximum Air Supply: 12bar(175psi):Minimum Air Supply: 145psi:Nett Weight: 0.57kg:Range: 0-10bar(0-145psi):PTDSEASA9312