Drill Bits

Delivery: in United Kingdom

Report

Reisser 241067 Hss-R Din338 Jobber Drill (Tube Of 10Pcs) 1.0Mm

Reisser HSS Roll Forged DIN338 Jobber Drill 118° chisel point tip For drilling metal and plasticHSS Roll Forged DIN338 Jobber Drill1.0mm DiameterOverall length: 34mmTube of 10pcPTDREI241067

£2.17

Delivery: in United Kingdom

Report

Reisser 241070 Hss-R Din338 Jobber Drill (Tube Of 10Pcs) 2.5Mm

Reisser HSS Roll Forged DIN338 Jobber Drill 118° chisel point tip For drilling metal and plasticHSS Roll Forged DIN338 Jobber Drill2.5mm DiameterOverall length: 57mmTube of 10pcPTDREI241070

£2.17

Delivery: in United Kingdom

Report

Kobe 11.0 x 300mm SDS-Plus Hammer Drill Bit

High quality industrial drill bits. TCT tipped with fully ground flutes. For rapid drilling of concrete, brick, masonry and other hard materials. SDS-Plus Hammer drill bits suitable for use with hammer/percussion drills fitted with SDS-plus chucks. Manufactured to DIN 8035. Other sizes available on request.

Delivery: in United Kingdom

Report

Draper Wood , 4mm (Pack of 2)

Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card.

from £2.19 up to £3.49

Compare prices and buy Draper Wood , 4mm (Pack of 2)

Electricalworld.com (United Kingdom) →	£2.00
RobertDyas.co.uk (United Kingdom) →	£3.00

Compare prices₂→

Makita D-09709 4 x 75mm HSS Metal Drill Bit

Ground point drill bits suitable for ferrous and non-ferrous metals, offering good drilling speeds and extended working life. Achieve fast, accurate drilling.

Delivery: in United Kingdom

Report

Milwaukee 1.50mm HSSG THUNDERWEB DRILL (DIN338) (PK-2)

1.50mm HSSG THUNDERWEB DRILL (DIN338) (PK-2) by Milwaukee

Delivery: in United Kingdom

Report

Dart 3.5mm HSS Ground Twist Drill - Single

Precision ground steel drill bits for a wide range of applications. Manufactured to DIN338 standards, 135 degree split point tip for drilling without pre-centring. The ground cutting edge offers fast drilling and perfect finishing, while the ground flute ensures fast chip removal. These drill bits are industrial quaility manufactured from high quaility High Speed Steel and hardened for superb strength. Right hand cutting at 30 degrees. Suitable for drilling cast iron, sheet metal, non-ferrous metal, steel stainless steel, brass, wood and PVC.

Delivery: in United Kingdom

Report

Dart 6.5 x 150mm Masonry Drill Bit

Precision engineered masonry drill bits for general purpose application. Manufactured to DIN8039 standards. Excellent resistance to heat, a milled flute and 130 degree Carbide tipped point make these bits suitable for use on masonry, concrete, stone, natural stone and aerated concrete.

Delivery: in United Kingdom

Report

Dart 6 x 150mm Masonry Drill Bit

Precision engineered masonry drill bits for general purpose application. Manufactured to DIN8039 standards. Excellent resistance to heat, a milled flute and 130 degree Carbide tipped point make these bits suitable for use on masonry, concrete, stone, natural stone and aerated concrete.

Delivery: in United Kingdom

Report

Dart 8 x 120mm Masonry Drill Bit

Precision engineered masonry drill bits for general purpose application. Manufactured to DIN8039 standards. Excellent resistance to heat, a milled flute and 130 degree Carbide tipped point make these bits suitable for use on masonry, concrete, stone, natural stone and aerated concrete.

Delivery: in United Kingdom

Report

Dart 9 x 120mm Masonry Drill Bit

Precision engineered masonry drill bits for general purpose application. Manufactured to DIN8039 standards. Excellent resistance to heat, a milled flute and 130 degree Carbide tipped point make these bits suitable for use on masonry, concrete, stone, natural stone and aerated concrete.

Delivery: in United Kingdom

Report

Sealey SDS Plus Adapter

SDS Plus to 1/2" x 20 chuck adaptor threaded to suit most SDS machines such as Bosch, Makita, Hitachi etc.

Delivery: in United Kingdom

Report

Starrett SDS Plus 2 Point Drill Bit 5.5 x 160mm

This Starrett SDS Plus 2 Point Drill Bit has the following specifications: Diameter: 5.5mm., Overall Length: 160mm., Working Length: 100mm.

Delivery: in United Kingdom

Report

Starrett SDS Plus 2 Point Drill Bit 6 x 160mm

This Starrett SDS Plus 2 Point Drill Bit has the following specifications: Diameter: 6mm., Overall Length: 160mm., Working Length: 100mm.

Delivery: in United Kingdom

Report

Faithfull HSSE M35 Cobalt Quick-Change Impact 2.5mm OL73mm WL30m

Faithfull Cobalt Quick-Change Impact Drill Bits feature a revolutionary tip design that is far superior to any other drill bit in the industry. These innovative drill bits have 7 cutting edges and 3 peaks that offer several distinct competitive advantages - Super-accurate self-centring - you can make a hole in a round-pipe with one hand. - Speed - twice as fast as split point drill bits. - Tool lifetime - up to 10 times longer life in mild steel. Manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance. The cutting performance is fantastic, both on precision and degree of finish, leaving much less defects (burr) than other drill bits. Its protruding centre …

from £1.95 up to £2.19

Compare prices and buy Faithfull HSSE M35 Cobalt Quick-Change Impact 2.5mm OL73mm WL30m

Tooled-up.com →	£2.00
Mytoolshed.co.uk (United Kingdom) →	£2.00
Zoro.co.uk (United Kingdom) →	£2.00

Compare prices₃→

Dormer A0024.9 A002 Hss-Tin Coated Jobber Drill 4.90Mm Ol:86Mm Wl:52Mm

Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel stainless cast iron ceramics plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 4.90mm.Working length: 52mm.Overall length: 86mm.PTDDOR490TIN

£2.21

Delivery: in United Kingdom

Report

Dormer A002S7/32 A002 Hss-Tin Coated Jobber Drill 7/32In Ol:93Mm Wl:57Mm

Each Dormer A002 HSS-TiN Coated Jobber Drill in pouch pack has a pointed web and fluted tip design. The point design allows for efficient cutting with a reduced axial force and allows for accurate centring. The web design provides optimised strength rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials and the Titanium Nitride coating resists flank and crater wear and has low friction that allows for increased

£2.21

Delivery: in United Kingdom

Report

Timco HSSGR7 Ground Jobber Drills - Hss M2 7.0Mm Wallet 1

Manufactured From A High Grade M2 Tool Steel. This Durable Engineering Quality Drill Will Give A Consistent Rapid Performance Into All Non-Alloy Materials. The 135° Split Point Prevents The Bit From Drifting And Enables Faster Penetration.PTDTIMHSSGR7

£2.23

Delivery: in United Kingdom

Report

Sealey SA10X235 Sds Plus Auger Wood Drill Ø10 X 235Mm

Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Ø10 x 235mm SDS Plus Auger Wood Drill• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.• Model No. SA10X235Model No: SA10X235:Brand: Worksafe:Size: Ã˜10 x 235mm:PTDSEASA10X235

£2.23

Delivery: in United Kingdom

Report

Reisser 145130 Hss-G Din340 Long Drills (Wallet 2Pcs) 2.5Mm

Reisser HSS Ground DIN340 Long Series Drill 118° chisel point tip For drilling metal and plasticHSS Ground DIN340 Long Series Drill2.5mm DiameterOverall length: 95mmPTDREI145130

£2.23

Delivery: in United Kingdom

Report

Makita D-09721 5 x 86mm HSS Metal Drill Bit

Ground point drill bits suitable for ferrous and non-ferrous metals, offering good drilling speeds and extended working life. Achieve fast, accurate drilling.

£2.24

Delivery: in United Kingdom

Report

Timco HSSR2 Roll Forged Jobber Drills - Hss 2.0Mm Tube 10

An Economic Hss Drill Used For Drilling All Non-Alloy Materials.PTDTIMHSSR2

£2.24

Delivery: in United Kingdom

Report

Starrett SDS Plus 2 Point Drill Bit 8 x 160mm

This Starrett SDS Plus 2 Point Drill Bit has the following specifications: Diameter: 8mm., Overall Length: 160mm., Working Length: 100mm.

£2.24

Delivery: in United Kingdom

Report