Drill Bits

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. Cobalt alloy and fully ground HSS provide wear resistance and heat protection. Two cutters and two flutes remove chips quickly to make the bits last even longer. Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels.

Dewalt DT4765 Extreme Impact Flatwood Drill Bit 14mm x 152mmThe Dewalt DT4765 has a 14mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and chamfered outer cutting spurs for razor-sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Cutting Diameter: 14mm 
- Length: 152mm
- Pack Quantity: 1

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 5.5mm • Drill Length: 93mm • He…

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 9mm • Length: 160mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.

Bosch 2608831021 SDS plus-3 Drill Bit For Masonry 8.0 x 200 x 260mm The Bosch 2608831021 is a single SDS plus-3 drill bit with a diameter of 8.0mm and a working depth of 200mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Increased relief angle from 12° to 17°
Shank Length: 157mm
Diameter: 6mm
Size: 6mm x 152mm

The CYL-9 MultiConstruction Drill Bit delivers stable drilling in all kinds of materials. Its centring tip provides a steady drilling start and good guidance universally. The diameter-optimised AWB brazing and hardening technology increases the robustness of the 2-cutter drill bit and reduces vibration during use. Additionally, the bit's 4-flute dura design with a reinforced core section delivers better wear resistance and stability when drilling soft concrete. The bit is intended for practically all materials in interior fitting work, e.g. soft concrete, masonry, brick, cement asbestos, light building materials, multilayer materials, ceramics and tiles, wood, plastic, sheet metals and aluminium.…

Faithfull Multi Construction Drill Bits are suitable for use in most materials encountered in the building industry. They can be used on brick, tile, concrete, metal, aluminium, wood and plastic, and are ideal for multi-layer materials. The diamond-ground carbide tip has advanced performance cutting edges for a long working life and the flute is designed for fast debris removal. Perfect for use in cordless drills when used on both rotary or hammer modes, dependent on the material being drilled (4mm bit rotary only).1 x Faithfull Multi Construction Drill Bit 7 x 100mmAdditional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.• 100mm: 1

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 6mm • Total Length: …

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

SDS Drill Bit 6x90x160mmC.K SDS Concrete Drill Bit 6x90x160mm~ Tungsten carbide tipped with optimized geometry for drilling concrete and stone~ Vacuum brazed tips for durability~ Ground flutes designed for optimum debris removal~ SDS-plus shank~ Diameter: 6 mm~ Working length: 90 mm~ Total length: 160 mmTechnical DataDiameter: 6mmWorking length: 90mmOverall length: 160mmComponent Material:Tungsten tipTechnical Specification:CE Certified: NoConflict Materials Content : YesConflict material Country of Origin: GermanyConflict material Name of substance: TungstenREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: …

The HSS-R construction of this drill bit guarantees exceptional durability and heat resistance, owing to the high-speed steel composition. Rapid chip removal during drilling minimizes heat buildup, extending the drill bit's lifespan. The precision-ground tip enhances cutting efficiency, allowing for smooth and precise drilling in metal surfaces. Features & Benefits • For drilling into soft steel and non-ferrous metals • High speed steel for general purpose drilling into metal • Round shanks for use with corded and cordless hammer drills • Reduced shank – Diameters 14-16mm have a reduced shank to 12.7mm Specifications • Diameter: 7mm • Drill Length: 109mm • He…

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.