Drill Bits

prices on 16333 models

Show

Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 30mm 1/2" 46/03X1/

Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length more→Metric: 78 • Bearing Dia Metric: 19 • Angle: 90

Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 12mm 1/4" 46/02X1/

from £88.95

Compare prices₄→

Blades that can be rotated in 90 degree increments giving three extra new edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 12 • Overall Length Me more→tric: 52 • Bearing Dia Metric: 19 • Angle: 90

Trend Lip and Spur Two Wing Machine Bit 40mm 1004/40TC

from £82.95

Compare prices₄→

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very c more→lean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 40 • Overall Length Metric: 92 • Type or Grade: TCT

Trend Lip and Spur Two Wing Machine Bit 38mm 1004/38TC

from £82.95

Compare prices₄→

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very c more→lean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 38 • Overall Length Metric: 92 • Type or Grade: TCT

Trend Lip and Spur Two Wing Machine Bit 35mm 1004/35TC

from £73.95

Compare prices₄→

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very c more→lean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 92 • Type or Grade: TCT

Trend Lip and Spur Two Wing Machine Bit 25mm 1004/25TC

from £67.95

Compare prices₄→

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very c more→lean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 25 • Overall Length Metric: 92 • Type or Grade: TCT

Trend Lip and Spur Two Wing Machine Bit 20mm 1004/20TC

from £66.95

Compare prices₄→

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very c more→lean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choose from Group 421 tools which have no scribers. For use in drilling machines only. Specifications: • Shank Diameter: 10 • Dia Metric: 20 • Overall Length Metric: 92 • Type or Grade: TCT

Trend TCT Dowel Drill 201 Series Left Hand Rotation 5mm 27mm 10mm IT/20100

from £21.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have more→a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x27 • Dia Metric: 5 • Cut Length Metric: 27 • Overall Length Metric: 57.5 • Type or Grade: LH

Trend TCT Dowel Drill 201 Series Left Hand Rotation 12mm 35mm 10mm IT/ 2010

from £33.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a more→cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • D=12 mm • C=35 mm • OL=70 mm • Shank Diameter=10x30 mm • Rotation=Left hand

Trend TCT Dowel Drill 201 Series Left Hand Rotation 10mm 35mm 10mm IT/ 2010

from £29.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills hav more→e a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Trend TCT Dowel Drill 201 Series Left Hand Rotation 5mm 35mm 10mm IT/20103

from £23.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have more→a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 5 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: LH

Trend TCT Dowel Drill 201 Series 6mm 35mm 10mm IT/2010377

from £25.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills hav more→e a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 6 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Trend TCT Dowel Drill 201 Series 5mm 27mm 10mm IT/2010017

from £21.95

Compare prices₄→

Trend TCT Dowel Drill 201 Series 12mm 35mm 10mm IT/2010557

from £33.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a more→cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • D=12 mm • C=35 mm • OL=70 mm • Shank Diameter=10x30 mm • Rotation=Right hand

Trend TCT Dowel Drill 201 Series 10mm 35mm 10mm IT/2010497

from £29.95

Compare prices₄→

Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills hav more→e a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x30 • Dia Metric: 10 • Cut Length Metric: 35 • Overall Length Metric: 70 • Type or Grade: RH

Trend Snap/SB5/Set Bit Set Colour Ring Torsion Zone (15 Piece)

from £11.99 up to £15.95

Compare prices₅→

Trend SNAP/SB5/SET Bit Set Colour Ring Torsion Zone 15 Piece The SNAP/SB5/SET is an assorted screwdriver bit set for a wide range of applications. With colour rings on the bit shanks to denote type f more→or ease of identification. The set contains fourteen 25mm insert bits which feature a torsion zone to minimise the possibility of breakage. Made of high grade hardened tool steel. Includes a magnetic bit holder. Supplied in flip lid storage case with belt clip. Contains: 1 x Magnetic bit holder 14pcs 25mm insert bits: 2 x Phillips (No.1 & 2) - Red ring 2 x Pozi (No.1 & 2) - Blue ring 2 x Slotted (4mm x 0.6mm & 6mm x 0.9mm) - Red/Orange ring 3 x Hex (3mm, 4mm & 5mm A/F) - Yellow/Orange ring 5 …

Trend Trend Snap/Pz/2a - Snappy Pozi No 2 Bit 150mm Ol

9.64Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

The bit has a 1/4 inch hex shank to fit the Quick Chuck.

Trend SNAPPY WS 9/64" Pack of 10 SNAP/DB964/10

from £21.95

Compare prices₄→

Trend Snappy Replacement Drills - 10 pack 9/64in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/12 & SNAP/CS/10H Replacement drills for piloting work using Imperial No10 more→screws in hardwood and No12 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 3.5 • Dia Imperial: 9/64 • Overall Length Metric: 75.5 • Pack Qty: 10 pack

Trend SNAPPY WS 7/64" Pack of 10 SNAP/DB764/10

from £18.95

Compare prices₄→

Trend Snappy Replacement Drills - 10 pack 7/64in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/8 Replacement drills for piloting work using Imperial No6 screws in hardwo more→od and No8 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 2.75 • Dia Imperial: 7/64 • Overall Length Metric: 68.5 • Pack Qty: 10 pack

Trend SNAPPY WS 5/64" Pack of 10 SNAP/DB564/10

from £17.95

Compare prices₄→

Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube. Specifications: • Dia Metric: 1.98 • Dia Imperial: 5/64 • Overall Length Metric: 52.5 • Pack more→Qty: 10 pack

Trend SNAPPY WS 3/32" Pack of 10 SNAP/DB332/10

from £17.95

Compare prices₄→

Trend Snappy Replacement Drills - 10 pack 3/32in Diameter For use with Trend Snappy Imperial Drill Countersink Ref: SNAP/CS/6 Replacement drills for piloting work using Imperial No6 gauge in softwoo more→ds. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation. Specifications: • Dia Metric: 2.38 • Dia Imperial: 3/32 • Overall Length Metric: 60 • Pack Qty: 10 pack

Trend SNAPPY WS 1/8" Pack of 10 SNAP/DB18/10

from £21.95

Compare prices₄→

Trend Snappy Replacement Drills - 10 pack 1/8in Diameter Trend Snappy Replacement Drills - 10 pack 1/8in Diameter For use with Trend Snappy Imperial Drill Countersinks Refs: SNAP/CS/1814, SNAP/CS/10 & more→SNAP/CS/10A Replacement drills for piloting work using Imperial No8 screws in hardwood and No10 gauge in softwoods. Provides a pilot hole to aid screwdriving and to prevent splitting when working close to an edge. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. Pack of 10 drills supplied in a storage tube for protection and easy transportation.

Trend Snappy Wood Plug Cutter 5/8" SNAP/PC/58

from £24.95

Compare prices₄→

Made from Tool Steel. Plugs are very slightly tapered. Recommended for use with a pillar drill. Use on timber to make plugs/pellets to plug screw holes Specifications: • Shank Diameter: 1/4 more→hex • Dia Metric: 15.9 • Dia Imperial: 5/8

Trend SNAP/PC/38 Plug Cutter 3/8in TRESNAPPC38

from £16.99 up to £19.95

Compare prices₅→

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

24 more item(s)