Concealed Frames & Cisterns

Compatible with back to wall floor standing toilet bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 150mm A pneumatic operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable through service tunnel positioned at the front or top of …

Compatible with back to wall floor standing toilet bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 126mm A pneumatic operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable through service tunnel positioned at the front or top of …

For built-in installation into room height plasterboard constructed walls For wall hung toilet bowls up to 66cm projection with connection dimensions in accordance with EN 33 2011 Incorporates a mechanical operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Easy and quick installation with EasyFix …

Compatible with back to wall floor standing toilet bowls and can be used at furniture heights with the appropriate bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 150mm A mechanical operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable …

Compatible with back to wall floor standing toilet bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 150mm A mechanical operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable through service tunnel positioned at the front or top of …

Compatible with back to wall floor standing toilet bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 126mm A mechanical operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable through service tunnel positioned at the front or top of …

TECE Profile Cistern connection with external thread R 1/2 inch on the side, compatible with quick adapters 1 x toilet module with Uni 750 cistern Height: 750 mm Toilet module including "easy fit" actuator plate mounting For attaching to TECE profile pipes or for installation in metal or wooden stand walls For mounting as a wall or corner module, also suitable for single block mounting Uni 750 cistern for top actuation: Safety tank made of impact-resistant plastic Cistern completely pre-assembled and sealed

Easy twist out and replace Single Flush Valve for older Roca WC Suites EXCLUDES Push Button (available separately) Package Dimensions: 36.4 L x 8.2 H x 14.8 W (centimeters)

Material :Plastic Length 105 mm Good quality product

Suitability Suitable only for AP109 cisterns. Material: Plastic Finish Chrome finish.

Material :Plastic Length 105 mm Good quality product

Package dimensions (L x W x H): 30.48 cm x 13.208 cm x 16.51 cm Package Weight: 430.846g Number of packs: 1 Number of pieces: 1

Geberit PE Flush Pipe 1mtr Extension 45mm OD External - suits outlet on Geberit frames Suitable for combination with overflow pipe cone

x

This cistern is designed to be installed in low height bathroom furniture and must not be installed behind the wall Designed for installation within a set-up of modern bathroom furniture and floor-standing WCs. With front access to the cistern Offering a water supply connection on the bottom left and a factory set flush volume of 5.8 litres

Tensile tight Schell brass cone compression fitting with length compensation Tensile resistant Schell brass cone crimp fitting with length compensation 1/2 "chrome, without self-sealing connection thread Tensile tight Schell brass cone compression fitting with length compensation

Debba Tank Wall C/Double Push Button Cap 3/4,5L Inf White Roca brand toilet tank Dimensions: 34 x 16 x 36 cm (L x W x H) - Colour: White Product reference: A341993000 With a present past, Roca continues to walk into the future. Tradition, trade and passion for people to continue accompanying them in their day to day, throughout their life.

The long double flush button Roca old style is suitable for use with the double flush valve Roca old style and comes complete with push rods to connect it to the discharge valve. This button requires a 35mm hole. Keep in mind! The two white push rods on the old-style push button are unthreaded and have a relatively flat shape. if your push rods are threaded on one end, you need a new-style push button. Largo 40mm Suitability Only suitable for use with old-style flush valves from Roca . Plastic Material Chrome Finish Connection Connects directly to the discharge valve.

Genuine Roca cistern pack for the Laura cistern Includes D2D Flush valve, A3I Filling valve & Button Comes with fitting pack & doughnut washer ring Will retrofit the older (D1D) models with a new look Everything you need to refurbish your cistern!

Package weight: 0.1 kilograms Model Number :recambios sanitarios Item package quantity: 1.0 item package dimensions: 2.8L x15.2Wx21H centimeters

Sigma 20 Actuator Plate White Gold-plated Geberit

Manufacturer: Tece Suitable for all Teceprofil flush-mounted cisterns Colour: white | brushed stainless steel 2 flush volume Dimensions: 220 x 150 x 11 mm

Feed Chute for cleaning tablets For up cisterns UP320 and up300 Good quality product