Drill Bits

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.10 mm x 300 mm.Additional Information:• Diameter: 10.0mm• Overall Length: 300mm• Pack Qty.: 1

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.1 x Faithfull SDS Plus Chasing Gouge 22mm Length 250mmAdditional Information:• Type: Gouge• Size: 22 x 250mm

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Osborn Goldex 81504 series jobber drill bits. High quality HSS fully ground titanium coated drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non-alloyed), grey cast iron, graphite and malleable cast iron. Features & Benefits • High speed steel TiN coated jobber drills • For drilling in steel, cast steel- alloyed and non-alloyed, stainless steel, titanium and aluminium • Standards DIN 338 • Self centering split point above 1.6mm • Bright finish body for maximum chip clearance Specifications • Size: 1.3mm • Flute Length: 16mm • Quantity: Pack of 10 • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° …

Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.Size. 10 mm x 200 mm.Additional Information:• Diameter: 10mm• Overall Length: 200mm• Pack Qty.: 1

The Faithfull Bevel Edged Chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB38 bevel edged chisel is blue and has the following dimensions:Blade Width: 10mm (3/8in)Blade Length: 140mmAdditional Information:• …

It is compatible with impact drills. The CYL-1 Drill Bit is optimised for drilling in masonry. Its 2-flute U-shape provides good dust removal while its standard carbide tip makes the bit more wear-resistant. This product is intended for use in masonry and limestone. Pack of 1 • Optimised for Drilling in Masonry • CYL-1 Drill Bit is optimised for drilling in masonry • 2-flute U-shape provides good dust removal • Standard carbide tip makes the bit more wear-resistant Specifications: Diameter (D) mm: 6,00 Working length (L1) mm: 350 Total length (L2) mm: 400 Materials: Stone Materials in Detail: Masonry

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 5 x 50 mm

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-40 Flat Bit 40mm

The CWC Pilot Pins are compatable with Rotabroach TCT series CWC 35mm cutters from 13mm - 17mm

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 16 • Overall Length Metric: 152

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bits suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø14 x 450mmDimensions: Length: 11mm x Height: 510mmWeight: 0.28KgWarranty: Consumable

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 38mm • Length: 160mm • Pack Quantity: 1 Features and Benefits: • Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 2.3mm • Length: 53mm • Pack Quantity: 10 Features and Benefits: • Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Size: 75 x 225mm (3in x 9in).Additional Information:• Width: 75mm

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents: 848 HSS Metal Twist Drill Bits, 3.1 x 40 mm

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.1 x Faithfull SDS Plus Chisel Bit Angled 40mm Length 250mmAdditional Information:• Type: Angled• Size: 40 x 250mm

The Stanley drill bit is used in conjunction with drills. They have a carbide tip that ensures durability. The shank of the tooling is securely fixed in the tool holder and is used for efficient drilling of tiles and glass. With its ultra sharp cutting edges, this drill bit effortlessly creates clean, smooth holes without chipping or cracking the fragile surface. Features & Benefits • Pointed carbide tip drills on contact for precise drilling • For use with corded and cordless drills • For use on ceramic tiles, glazed tiles, and non-toughened glass Specifications • Diameter: 6mm • Product Length: 76mm • Head Type: Tungsten Carbide • Shank: Round

The Raptor Short series Pilot Pins are compatible with Rotabroach RAPL broach cutters with a depth of 50mm and diameter of 13mm to 65mm.

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 9.5mm • Total Length: …