Projector Mounts

Adapts 1.5 NPT threaded extension columns to a 2” (51mm) tube truss for temporary projection and flat panel needs. Designed especially for rental and staging installation benefits

• Compatible with all Chief CMS columns accessories projector & flat panel mounts
• Trigger style clamp allows for one person install
• Safe working load of 250 lbs (113.4 kg)
• Cable port for easy exit
- Features
- Bracket Type Clamp
- Colour Silver

SMS Smart Media Solutions AE016050-P1 project mount Wall Aluminium, White

AMRE5006 6 long extension tube with internal cable management (50mm diameter). This extension tube will allow you to lower your projector installation height by 6. These tubes can be combined with any of the same series (61224) to allow different lengths. eg. Combine a 6 and 12 to extend your total extension distance to 18 or perhaps you need 4ft by combining two 24 tubes.
Please note that the projector mount (AMRP100 or AMRDCP100KIT) has about 8.5 inches of drop so the extension will add to the total length. The tube can help lower the projector to your desired height from the ceiling if you do not want to rely on screen height or lens shift/keystone adjustments provided by your projector.…

Articulating Dual Monitor Arms with One-Touch Gas Spring Adjustment - ergonomic full motion and height adjustable
Turn your (home) office desk into an ergonomic environment and reclaim valuable workspace with this Manhattan monitor mount. Since it uses a gas spring to hold your displays these monitor arms only need a light touch to move your screen to the best viewing angle for you. The dual monitor VESA mount supports 17"" to 32"" displays with a weight capacity up to 9 kg (19.8 lbs.) each. An attractive black finish complements your workspace.

Light-touch height adjustment
A gas-spring cylinder makes it easy to raise or lower the display anywhere from 158 to 406 mm (6.2 to 16 in.) so …

Projector ceiling mount with variable distance between ceiling: 63-100 cm - maximum load capacity: 25kg - colour: white- projector mount for ceiling mounting
Arm reach between 14cm & 35.5cm - Reach of arms can be adjusted to 35.5cm without additional expansion! - Also for large & heavy projectors!
Tiltable in all directions by 15 ° - available in different sizes and colours - 4-point holder is compatible with 99% of all common projectors
Simple height adjustment for greater ceiling clearance - cable routing in the pipe possible - Neat design fits in every room
Ideal bracket for home cinema, living room, conference room, office, school, university, exhibition centre - simple and safe ceiling m…

CPA116
The CPA116 was designed specifically for use in Europe the Middle East and Africa and is only available in those regions.

This projector ceiling plate offers extreme rigidity along with an aesthetic appearance to blend with any environment.

COMPATIBILITY
Compatible with all CPAE columns

SECURITY
All-Points Security System includes locking hardware at column connection point to protect against theft

AESTHETIC COVER
Ceiling plate cover conceals hardware and can be mounted in 1 of 4 possible positions

CABLE MANAGEMENT
Integrated cable management allows cables to exit the top of the plate through the cable exit port
- Features
- Bracket Type Ceiling
- Colour Black …

Maximum load: up to 9 kg
Minimum/Maximum horizontal spacing: 75/100 mm
Minimum/Maximum vertical spacing: 75/100 mm
Adjustable tilt from +45° to -45°
Mounting to tabletop or in cable hole
Comes with a set of mounting screws
VESA standard: 75x75, 100x100 mm

SMS Smart Media Solutions PP140003 project mount Ceiling White

Dedicated Ceiling Mount for Sony VPL-XW5000 & VPL-XW7000 Projector – White
• Flush ceiling mount to fit VPL XW5000 / VPL XW7000
• Dedicated mount fits perfectly around projector profile.
• Black or White finish to match projector
• Cable guards included for neat and secure installation.
• Security lock prevents deliberate or accidental removal.
• High grade laser cut steel with robust powder coated finish.
- Features
- Bracket Type Ceiling
- Max Weight 13 KG
- Colour White

Peerless MOD-PJF2KIT150-B project mount Ceiling Black

Max. Load capacity: 10.5 kg. Max. VESA: 75x75, 100x100
The gas spring structure provides a perfect counterweight in all directions
The built-in spring tension meter can be easily adjusted to different weights on the arm
Free-tilting design for multiple viewing angles of the monitor
Cable clips keep cables organized and protected