Concealed Frames & Cisterns

The toilet actuator plate is suitable for dual flush technology The push plate in black impresses with its modern design The module can be operated from the front or from the top The control panel is compatible with a slot for cleaning tabs The scope of delivery includes the actuation rods, mounting material and the removal tool

Compatible with back to wall floor standing toilet bowls and can be used at furniture heights with the appropriate bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 150mm A pneumatic operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable …

Geniune product direct from Armitage Shanks Suitability Suitable for most Ideal Standard flush valves Packs Avalible

Manufacturer Code: 37859 Original Grohe spare parts

Replacement valve for the AP109 concealed cistern Model 109.720.00.1 operated with dual flush pneumatic button Valve only. Air actuator available seperately B006P3NNLY Valve is easily removed by clips either side of the cradle

Compatible with back to wall floor standing toilet bowls and can be used at furniture heights with the appropriate bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 150mm A mechanical operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable …

It has a low-noise hydraulic filling valve The module has a galvanised steel frame The transition adapter is also suitable for horizontal installation The safety tank is made of impact-resistant plastic The mounting distance may vary between 18 or 23 cm

Low level cistern with classic Edwardian styling Dual flush - 6/4 litre Includes chrome flushpipe and traditional lever 5 year guarantee. This product has undergone extensive testing and surpasses all British and European standards. Tested in accordance to BS EN 997 and BS EN 33

Hand shower holder Metal Grohe StarLight surface International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This product comes with a 5 year manufacturers warranty Sound transmission to adjoining rooms minimised with GROHE whisper noise control Reduce your water consumption by up to 50% with GROHE eco joy and pay a smaller utility bill Spare Flush: additional flush volume for an effective flush, even with old plumbing Quick and tool free connection of water supply, flexible hose and inspection shaft Reduced installation time thanks to GROHE quick fix Rapid SL installation systems with safety feature are safe for loads of over 400 kg Note: The flush plate is adjustable to achieve the horizontal or vertical

The Loop collection urinal actuator plate is decorated with a round button in matt chrome for small flushing. The square panel made of modern green gl looks interesting in a bathroom or toilet that already works with the same material. The small size of the panel can either emerge from the wall with sharp edges or you can flush the plate with the help of a practical mounting frame in four different designs. Warranty: 5 years Collection: TECEplanus Board colour: green Key colour: matt chrome

Compatible with back to wall floor standing toilet bowls Can be installed into masonry or cavity/stud constructed walls with a minimum wall depth of 126mm A pneumatic operated cistern with SmartValve technology - an inlet valve that only allows refilling of the cistern after the flush is complete, avoiding any wastage of water during flushing. This patented feature has been proven to save up to 63 litres a week which corresponds to a 12% reduction in users' water bills. Not only does it promote water conservation but it is a quick filling valve and is compatible with any water pressure. Dual flush pre-set at 6/4L Fully maintainable through service tunnel positioned at the front or top of …

Genuine Ideal Standard Cistern lever E8643AA Complete with E830001 white fulcrum fixing bush Ideal Standard AA Chrome finish Used on many suites like Duchess & Princess Package contains two items - 1 Lever & 1 Fulchrum kit (both available to order seperately)

To ensure that you receive the best possible performance and longevity from your bathroom suites and their appliances, it’s important that you install the highest quality parts and components. As well as offering high performance efficiency, this Essentials Concealed Cistern boasts the most compact concealed cistern design on the market. It’s also eco-friendly and sustainability conscious with its water saving dual flush valve and water saving delayed action inlet valve – so you no longer need to worry about your toilet wasting water. And for the less experienced DIY-er, this cistern features a side entry inlet valve to allow quick and easy installation – it even includes a chrome push but…

Manufacturer Code: 4379100M Genuine GROHE spare part

Package dimensions (L x W x H): 30.48 cm x 13.208 cm x 16.51 cm Package Weight: 430.846g Number of packs: 1 Number of pieces: 1

Suitability: Suitable for a variety of Ideal Standard Pneumatic flush valves Material(s) Plastic. Finish Chrome finish.

Manufacturer: Tece Suitable for all Teceprofil flush-mounted cisterns Colour: white | brushed stainless steel 2 flush volume Dimensions: 220 x 150 x 11 mm