Drill Bits

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combination of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 4.2mm • Total Length: …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Parabolic web cross section
Flute form ejects hot chips rapidly
Polished finish
Accepts higher feed pressure
135° Split point

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 150 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 150mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These DeWalt drill bits have a carbide split-point tip and aggressive flute angles, they deliver the power to easily drill through a range of materials without the need to change bits. A no spin shank helps to increase efficiency by eliminating bit slippage. Features & Benefits • Suitable for wood, plastics, mild steel and non-ferrous metals and masonry • CrNiMo steel for optimal power transmission and breakage stability • Anti-slip shank with 3 milled clamping surfaces prevent rotation of the drill bit in the chuck Specifications • Head Type: Carbide Grit • Diameter: 5mm • Product Length: 113mm • Working Length: 83mm • Shank/Connection: Round

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

It is compatible with impact drills. The CYL-1 Drill Bit is optimised for drilling in masonry. Its 2-flute U-shape provides good dust removal while its standard carbide tip makes the bit more wear-resistant. This product is intended for use in masonry and limestone. Pack of 1 • Optimised for Drilling in Masonry • CYL-1 Drill Bit is optimised for drilling in masonry • 2-flute U-shape provides good dust removal • Standard carbide tip makes the bit more wear-resistant Specifications: Diameter (D) mm: 6,50 Working length (L1) mm: 90 Total length (L2) mm: 150 Materials: Stone Materials in Detail: Masonry

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø10 x 155mmDimensions: Length: 1mm x Height: 235mmWeight: 0.064KgWarranty: Consumable

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-16 Flat Bit 16mmAdditional Information:• Diameter: 16mm• Overall Length: 152mm• Pack Qty.: 1

• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 200mmDimensions: Length: 10mm x Height: 275mmWeight: 0.064KgWarranty: Consumable

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 5.50 mm Dia. Pack of 2Additional Information:• Tip Diameter: 5.5mm• Working Length: 57mm• Overall Length: 93mm• Pack Qty.: 2

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Specifications • Cutting Width: 8mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP150PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.5mm.Pack quantity: 3.Additional Information:• Tip Diameter: 1.5mm• Working Length: 16mm• Overall Length: 40mm• Pack Qty.: 3

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 235mmDimensions: Length: 8mm x Height: 325mmWeight: 0.064KgWarranty: Consumable