Car Subwoofers WINCA C041  all car subwoofers →

Optimally blended pulp cone reproduces natural sound with a smooth frequency response Rubber surround supports the linear movement while reducing unwanted resonance Powerful strontium magnet precisely drives the cone and delivers clear sound Wide sound dispersion expands the listening sweet spot Unique fixture provides flexible mounting options, designed to fit a variety of locations

Gehäusesubwoofer

Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(…

Sensitivity SPL (1W / 1m) 88 dB, Resonant Frequency 28 Hz Polypropylene & Paper Cone, 2 Inch Aluminum Voice Coil, Rubber Surround Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1.5 Cubic Feet 1.5" x 12.5" Slotted Inch Port Dimension , 30 Inch Port Length, 35 Hz Port Frequency Dimensions: Depth 12.5” x Width 12.5” x Height 6.4” 3 Year Platinum Online Dealer Warranty

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Power Range: 100W - 350W RMS Power Handling: 350 Watts Peak Power Handling: 1000 Watts Frequency Response: Frequency Response: 30Hz - 200Hz Material: Poly-Mica Dust Cap & Pulp-Kevlar

Power Range: 150 W-350 W RMS RMS Power Handling: 350 W RMS Peak Power Handling: 1000 W PEAK Frequency Response: 30 Hz-200 Hz Material: Reinforced Parabolic Cone Structure with Poly-Mica Dust Cap & Pulp-Kevlar Cone Body

10" Protective Subwoofer Grill Works with Alpine SWA-10S4 Subwoofers Includes all Necessary Mounting Hardware

Cta-2031 specifications: 300w rms, 900w peak Alpine s-w8d2 s-series subwoofers Frequency response: 34hz-200hz Mounting depth: 3 3/4-inch

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

SSI (Selectable Smart Impedance): the exclusive dual impedance switch allows a variety of system configurations when one or more subwoofers are used International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

6-Inch 2-WAY CAR AUDIO COMPONENT SPEAKER SYSTEM 125 Watts Max Each Side, 25 Watts RMS Each Side Built to handle all bass levels down to the lowest frequencies 4 Ohms Impedance Frequency Response: 30 - 30,000 Hz High efficiency and low distortion

On b W O or fe R 40hz-400hz Rear High Pass 50hz-1.5Khz Front high pass 50hz-7.5Khz.

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

20cm (8) Active Underseat Subwoofer. Power: 150/300 Watts RMS/MAX Class-D. low pass 50-120 Hz. bass boost 0-12db @ 45 Hz. high/low level input. auto-on (audio/DC offset). phase shift 0-180°. includes PLC bass remote control. dimensions: 36.5 x 23.8 x 8.5 cm

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base