230 mm cutting discs

The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionally, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications: Diameter mm: 230 Bore diameter mm: 25.40 Cutting width mm: 2,4 Segment height mm: 10 Materials: Stone Materials in Detail: Stoneware …

Bosch 06159975Z4 Set of 4 Discos Std. 2x230+2 X-LOCK 115 mm.

This Norton Clipper Classic Universal Blue Diamond Blade has the following specification: Diameter: 230mmBore: 22.23mm

DeWalt Demolition Carbide Reciprocating Saw Blade designed for the most demanding nail embedded wood. Manufactured with carbide teeth for increased durability, speed and life. Specifications • Blade Length: 230mm • Teeth Per Inch: 6 • Material: Carbide • Application: Cutting Wood & NailsFeatures & Benefits• Carbide Teeth for increase durability, speed and life • Tall, thick blade profile designed to increase durability and minimizes blade breaks • Carbide Demolition Blades are ideal for the most demanding nail embedded wood

Carbide Recip Blades for Metal applications are ideal for cutting through a wide range of metals including steel pipe, cast iron and stainless steel. Manufactured with carbide teeth for increased durability, speed and life. Specifications • Blade Length: 230mm • Teeth Per Inch: 8 • Material: Carbide • Application: Cutting MetalFeatures & Benefits• Carbide Teeth for increase durability, speed and life • Ideal for cutting through a wide range of metals including steel pipe, cast iron and stainless steel • Tall, thick blade profile designed to increase durability and minimizes blade breaks

DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, aluminium and non-ferrous metals. Specifications • Diameter: 230 mm • Thickness: 1.5 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …

Diamond Blade for the DeWalt DCS690 Cordless Flexvolt Disc Cutter. Specifications • Diameter: 230mm • Bore: 22.23mm

DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which encloses the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 230mm • Bore: 22.2mm • Thickness: 2.8mm • Performance: Extreme • Applications: Cutting Features & Benefits• Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders

Dewalt DT20655 4 Tooth Brush Cutter Blade For Trimmer 230mm The Dewalt DT20655 is a spare brush cutter blade for the DCM571 and DCM581 garden trimmers. It is perfect for the most demanding and heavy-duty clearing tasks such as tough grass and thorns. Features:
- Replacement brush cutter blade for the DCM571 and DCM581 trimmers
- Everything from simple grass trimming to heavy-duty clearing work
- High quality blade Specification:
- No. of teeth: 4
- Size: 230mm

DeWalt Extreme Runtime Metal Reciprocating Sabre Saw Blades. Features & Benefits • Designed for cordless tools to maximise battery life and runtime • Up to 2x runtime and 2x longer life, ideally suited for FlexVolt • High efficiency design to achieve more cuts per charge Specifications • Manufacturer Code: DT99554-QZ • Quantity: 5 • Length: 230mm

Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Depressed Centre (DPC) cutting disc designed for cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Flat cutting discs made from premium quality resin bonded silicon carbide. Reinforced with fibreglass to improve the strength and performance. Designed for fast straight cutting of stone.

Einhell diamond blades are suitable for tough building materials including brick, concrete and tiles. This two piece diamond blade set is suitable for most standard 230mm (9") angle grinders, inlcuding those from the Einhell range. One blade has a continuous rim and the other is segmented. Continuous rim diamond blades are ideal for cutting brittle materials like tiles as they minimise the chances of cracking or damaging them in the process. Segmented diamond blades allow for better ejection of waste material which enables them to cut with greater speed and efficiency in materials such as bricks and blocks. Features & Benefits • Two piece diamond blade set for 230mm (9") angle grinders …

The Faithfull Abrasive Series Diamond Blades offer a great cost per cut ratio with good diamond quality and bond formation. The fast cutting 10mm segments have a long life span. Can be used for both dry and wet cutting, best results with wet cutting. They are ideal for cutting asphalt and abrasive materials including green concrete, breeze blocks, soft facing bricks, abrasive refractory materials, firebricks, cellular concrete bricks, soft sandstone and other lightweight building materials. Conforms to EN 13236. This Faithfull Abrasive Diamond Blade has the following specification Disc Diameter 230mm Bore 22.23mm Max. rpm 6,650

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork. Manufactured to EN 13236 Standards.This Faithfull Contract Diamond Blade has the following specification: Size: 230mmBore Size: 22.2mmPack Quantity: 1Additional Information:• Diameter: 230mm• Bore: 22.2mm

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the …

The Faithfull Porcelain Series Diamond Blades are ideal for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also be used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236.This Faithfull Porcelain Diamond Blade has the following specification: Disc Diameter: 230mmBore: 22.23mmMax. rpm: 13,300Additional Information:• Diameter: 230mm• Bore: 22.23mm

The Faithfull Professional Trade Level Diamond Blade with 10mm sintered segments allowing for a longer working life and less blade changes. The aerated core allows for better cutting performance and aids cooling. Ideal for cutting materials of medium hardness commonly found on the worksite such as class B engineering bricks, concrete kerbs, concrete lintels and beams, reinforced concrete, building blocks, roofing tiles, 30-60 newton block paviours, York stone, concrete pipes and other less abrasive materials.Blade Diameter: 230mm.Bore Size: 22.2mm.Segment Height: 10mm.Additional Information:• Diameter: 230mm• Bore: 22.2mm