Drill Bits

The Milwaukee Shockwave Multi-Material Drill Bits have been designed with a 2 cutter carbide tip to provide durability along with versatility for drilling into a wide range of tough materials including; Concrete, Bricks, Roof Tiles, Thin Metal, Ceramic, Tiles, Wood, PVC, Aluminum, Drywall and More. Equipped with a 1/4" hex shank, these multi-material drill bits are compatible with impacts, drill/drivers, and hammer drills. Milwaukee Shockwave Multi-Material Drill Bits provides the ideal all-in-one solution for the widest variety of materials, tools, and applications. Specifications • Cutting Width: 7mm • Length: 100mm • Pack Quantity: 1Features & Benefits• For use with Concrete,…

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 120mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 120mm Working length. • Supplied in a plastic wallet. • Model No. BSB12.5Technical Specification:Size: ø12.5 x 150mmWeight: 0.072KgWarranty: Consumable

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 250 x 20mm (10 x 3/4 in).Additional Information:• Length: 250mm (10in)• Width: 20mm (3/4in)

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.1 x Bahco 9629-25 Flat Bit 25mmAdditional Information:• Diameter: 25mm• Overall Length: 152mm• Pack Qty.: 1

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 13 mm Overall Length: 152 mmAdditional Information:• …

The DT4924 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 4mm • Length: 75mm • Working length: 43mm • Pack Quantity: 2

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 8mm • Length: 150mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck. For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.The Faithfull FAISDS65160 SDS Drill has a heavy-duty tungsten …

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 75mmNett Weight: 0.043kgPack Qty: 3pcsTyp…

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 16 mm.Length : 165 mm.Additional Information:• Diameter: 16mm• Overall Length: 165mm• Pack Qty.: 1

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 4mm • Length: 75mm • Pack Quantity: 2Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction and …

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 75mmNett Weight: 0.043kgType: PhillipsDime…

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 75mmNett Weight: 0.043kgType: PoziDimensio…

Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Impact grade power tool bits for the professional user.• Forged from high quality S2 steel.• Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load.• Torsion bits absorb impact and transfer maximum torque to the fixing.• Lifetime guarantee*.Impact grade power tool bits for the professional user. Forged from high quality S2 steel. Specially heat treated CNC precision machined tips reduce stress and prevent cam-out under load. Torsion bits absorb impact and transfer maximum torque to the fixing.Technical Specification:Length: 75mmNett Weight: 0.043kgPack Qty: 3pcsTyp…

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 2mm • Length: 49mm • Pack Quantity: 2Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction and …

• Superior quality auger wood drill bit has the SDS Plus shank.• Ideal for use with 2kg SDS Plus drills with hammer action switched off.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has the SDS Plus shank. Ideal for use with 2kg SDS Plus drills with hammer action switched off. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø12 x 235mmDimensions: Length: 20mm x Height: 325mmWeight: 0.109KgWarranty: Consumable

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Display packed.

Bosch 2608596056 Multi-Purpose Drill Bit Multi Construction (9 x 80 x 120mm) Features:
- CYL-9 Multi construction drill bit
- For drilling in all kinds of materials
- Centring tip for a precise drilling start and good guidance in the drilled hole
- Fine grade high durable carbide - extra long life/best wear resistance
- Diameter optimized brazing and hardening technology to increase the robustness of the drill bit and reduce the vibration during drilling
- Diamond ground cutting edges - special ground tip enables multi-purpose drilling
- 4 flute dura design - reinforced core section for better wear resistance and stability when drilling in concrete
- Suitable for practically …

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 855/1 TH SB bits, PZ 2 x 25 mm, 2 pieces; 2x 855/1 TH bits: PZ 2x25