United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Drill Bits   / 

Drill Bits

 prices on 16333 models  
Show
Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.
from £3.49 up to £3.96 
Compare prices and buy Draper Expert Flat Wood Bit, 16mm
£3.00
£3.00
£4.00
Compare prices3
The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 6mm • Length: 150mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …
from £3.49
Compare prices and buy Milwaukee Premium Concrete Drill 6mm 150mm Pack of 1 4932471176
£3.00
£3.00
Compare prices2
Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Display packed.
from £3.49 up to £7.25 
Compare prices and buy Draper HSS Extra Long , 9.5 x 175mm
£3.00
£3.00
£5.00
£7.00
Compare prices4
The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …
from £3.09 up to £3.49 
Compare prices and buy Bosch HSS-Co Cobalt 4.2mm Pack of 1
£3.00
£3.00
£3.00
£3.00
Compare prices4
The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …
from £3.49
Compare prices and buy Bosch SDS Plus 5 Masonry 7mm 160mm Pack of 1
£3.00
£3.00
£3.00
Compare prices3
The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 7mmWorking Length: 67mmOverall Length: 107mmAdditional Information:• Tip Diameter: …
from £3.49
Compare prices and buy Faithfull Professional HSS Jobber 7mm FAIJ700PRO
£3.00
£3.00
Compare prices2
Up to 3x faster than a standard drill bitSpade bits are a great accessory for electricians and other installation and building workers. What if they could be even faster and more efficient? With Bosch Tip Technology, they can.The Expert SelfCut Speed features the most advanced designs for spade bits, making it easy to use and highly practical for heavy professional users. Its Bosch patent threaded tip draws the spade bit into wood with only the lightest pressure from the user, which is especially helpful when drilling upside down or in tight niches. Its advanced paddle design ensures extra speed.Equally at home in softwoods, chipboard or particleboard, the Bosch Expert SelfCut Speed Spade Bit …
from £2.76 up to £3.49 
Compare prices and buy Bosch Expert Self Cut Speed Hex Shank Flat 8mm 152mm 2608900310
£3.00
£3.00
£3.00
Compare prices3
The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …
from £3.49 up to £4.99 
Compare prices and buy Bosch HSS-G Extra Length 4.2mm Pack of 1 2608595680
£3.00
£3.00
£5.00
Compare prices3
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.11 mm x150 mm.Additional Information:• Diameter: 11.0mm• Overall Length: 150mm• Pack Qty.: 1
from £3.49
Compare prices and buy Faithfull Heavy Duty Tungsten Carbide Tipped Masonry 11mm 150mm
£3.00
£3.00
Compare prices2
Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.13.00mm.Additional Information:• Tip Diameter: 13.0mm• Working Length: 98mm• Overall Length: 150mm• Pack Qty.: 1
from £3.49
Compare prices and buy Faithfull HSS Jobber Metric 13mm FAIJ1300
£3.00
£3.00
Compare prices2
Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.
from £3.49 up to £5.29 
Compare prices and buy Faithfull Impact Rated Flat Bit 8 x 152mm FAIFB8
£3.00
£3.00
£5.00
Compare prices3
Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.
from £3.49 up to £5.39 
Compare prices and buy Faithfull Impact Rated Flat Bit 6 x 152mm FAIFB6
£3.00
£3.00
£5.00
Compare prices3
• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø16 x 155mmDimensions: Length: 15mm x Height: 225mmWeight: 0.114KgWarranty: Consumable
from £3.37 up to £4.59 
Compare prices and buy Sealey Worksafe Auger Wood Drill Ø16 x 155mm
£3.00
£3.00
£3.00
£4.00
£5.00
Compare prices5
The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…
from £3.39 up to £3.49 
Compare prices and buy Bosch Series 3 SDS Plus Masonry 10mm 110mm Pack of 1 SDS PLUS 3
£3.00
£3.00
£3.00
Compare prices3
Concrete drill bits with SDS-Quick shank.Concrete drill bit for quickly and easily positioning fixings. High drilling performance and long lifetime are the features of this versatile concrete drill bit. A hammer-resistant tungsten carbide tip allows for drilling in hard concrete, natural stone, artificial stone and masonry. SDS-Quick: Shank system for Uneo / Uneo Maxx and all conventional three-jaw chucks - maximum transmission of torque.Specifications:Diameter - 10mmTotal length - 120mmWorking length - 70mmApplication:Hard concreteNatural stoneArtificial stoneMasonry
from £3.49
Compare prices and buy Bosch UNEO SDS Quick Masonary 10mm 120mm Pack of 1 2609256907
£3.00
£3.00
£3.00
Compare prices3
For use on glass mirrors, floor tiles and quarry tiles. Display packed.
from £3.49 up to £4.89 
Compare prices and buy Draper Tile and Glass , 8mm
£3.00
£3.00
£4.00
£5.00
Compare prices4
Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit
from £3.49
Compare prices and buy Sirius Professional HSS Jobber Imperial 7/32" Pack of 1
£3.00
£3.00
Compare prices2
The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 7mm • Length: 150mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …
from £3.49 up to £11.99 
Compare prices and buy Milwaukee Premium Concrete Drill 7mm 150mm Pack of 1 4932471181
£3.00
£3.00
£12.00
Compare prices3
The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…
from £3.49
Compare prices and buy Bosch 5X SDS Plus Masonry 8mm 110mm Pack of 1 2608833788
£3.00
£3.00
Compare prices2
Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.
from £3.49 up to £3.70 
Compare prices and buy Draper Flat Wood Bit, 12mm
£3.00
£3.00
£4.00
Compare prices3
Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 19mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …
from £3.49
Compare prices and buy Milwaukee Hex Shank Flat 19mm 160mm Pack of 1 4932363137
£3.00
£3.00
Compare prices2
Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high quality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.
from £3.49 up to £3.70 
Compare prices and buy Draper Expert Flat Wood Bit, 13mm
£3.00
£3.00
£4.00
Compare prices3
Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …
from £3.49
Compare prices and buy Milwaukee M2 SDS Plus Masonry 8mm 110mm Pack of 1 4932307070
£3.00
£3.00
£3.00
Compare prices3
The Stanley Flatwood Drill Bit is high quality combined with other hard materials with modern design. Quick drilling without the “drill” effect thanks to the special construction of the drill head. Clean CNC burr holes used in the production and unique tip design make this drill ideal for drilling in wood. With its superior construction, this drill bit ensures longevity and reliability throughout extensive use. The solid steel body offers enhanced strength and stability, resulting in a longer lifespan compared to other standard drill bits. Features & Benefits • Ground central point for accurate drilling • Cutting edges for fast, clean drilling • Hex shank prevents bit slipping in s…
from £3.49
Compare prices and buy Stanley Flat Wood 14mm 154mm Pack of 1 STA52015
£3.00
£3.00
Compare prices2
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Suitable for
Diameter
Total length
Shank type
Items in set