Drill Bits

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 2.1mm • Length: 49mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

The Makita D-74756 is a 4 piece Tungsten Carbide Tipped Drill Bit Set, adapted for use with SDS Plus Hammers. The bits are supplied in a compact and easy to open butterfly type case so bits can be easily located and removed. It is ideal for masonry, indoor decorators, constructors and more. Features & Benefits • 4 piece set for SDS Plus Hammers • Compact easy to open plastic butterfly case • Bits can be easily located and removed • Suitable for masonry workers, indoor decorators and constructors Specifications • Sizes: 6, 8, 10 and 12mm • Length: 160mm Contents • 6mm SDS Plus Drill Bit • 8mm SDS Plus Drill Bit • 10mm SDS Plus Drill Bit • 12mm …

• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet.HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 130mm Working length. Supplied in a plastic wallet.• HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 130mm Working length. • Supplied in a plastic wallet. • Model No. BSB16.5Technical Specification:Size: ø16.5 x 180mmDimensions: Length: 20mm x Height: 200mmWeight: 0.17KgWarranty: Consumable…

The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.This IRWIN® Speedhammer Quad Drill Bit has …

Irwin Blue Groove 6X Stubby Wood Bits are ideal for drilling wood and offer 6 times faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Specifications:Diameter: 16mm.Working length: 50mm (2in).Overall length: 100mm (4in).Additional Information:• Diameter: 16mm• Overall …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

These DeWalt Extreme Metal Drill Bits are suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm². Strong central core with tapered web that greatly reduces breakage and no walk tip for easy positioning on curved surfaces. Features & Benefits • Suitable for portable drilling of steel, alloyed and non-alloyed up to 900N/mm² • An innovative tapered web greatly reduces breakage with a gold ferrous oxide coating preventing overheating for longer bit life • Three flat sides eliminate slipping in the chuck • Permanent size markings located above shank for increased visibility Specifications • Head Type: HSS • Diameter: 10.5mm • Working …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 10mm • Length: 133mm • Pack Quantity: 1Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction and …

The CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles. Dry drilling without lubrication is possible, which makes working with this bit effortless and convenient. Additionally, it has a simple flute-less design, which is especially suitable for drilling through soft-to-medium hard tiles. Drill without impact at low speeds. The bit is compatible with corded or cordless non-impact drills with a cylindrical shank system. Pack of 1 • Standard for Drilling in Tiles • CYL-9 Ceramic Tile Drill Bit is the standard choice when drilling in tiles • Dry drilling without lubrication for convenient use • Simple flute-less design is especially suitable for drilling …

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP650LS Pre Pack HSS Jobber Drills Long Series 6.5mm have the following specifications:Diameter: 6.5mm. Overall Length: 148mm. Pack quantity: 1.Additional Information:• …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.Additional Information:• Diameter: 7.0mm• Overall Length: 300mm• Pack Qty.: 1

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.Size: 230 x 5mm (9 x 3/16in).Additional Information:• Length: 230mm (9in)• Width: 5mm (3/16in)

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 10 • Overall Length Metric: 152

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø16 x 460mmDimensions: Length: 1mm x Height: 525mmWeight: 0.344KgWarranty: Consumable

Get Extreme results with The Dewalt DT9517 SDS+ Drill Bit The Dewalt DT9517 SDS+ Extreme drill bit is 6mm in diameter with a working depth of 200mm. It has great performance in terms of speed, life, and endurance. Perfect for drilling materials such as concrete, masonry, stone and brick thanks to its superior carbide grade construction and hardened body. The new tip design ensures better bit penetration for optimum drilling performance and precision. Features:
- Optimised flute design allows efficient debris removal
- Hardened body for extra strength and reduced breakage
- Superior carbide grade for long life and greater durability
- New tip design ensures better bit penetration, longer …

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications: • Diameter: 5mm • Length: 160mm • Working Length: 100mm • Pack Qty: 1Features & Benefits• The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot drilling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground…

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø25 x 155mmDimensions: Length: 5mm x Height: 210mmWeight: 0.2KgWarranty: Consumable

Bosch 2608833780 SDS+ 5X Hammer Drill Bit 6mm x 200mm x 260mm The Bosch 2608833780 SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming. Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design provide fast dust removal for increased drilling speeds and reduced wear
- Centring tip guides dril…