Drill Bits

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Milwaukee Contractor series SDS Plus drill bit. Specifications • Shank: SDS Plus • Diameter: 7mm • Length: 110mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 7.0 mm Dia.Additional Information:• Tip Diameter: 7.0mm• Working Length: 69mm• Overall Length: 109mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The DEWALT Rotary/Percussion Masonry Drill Bits have 130 Douglas Form carbide tips. They are ideal for drilling anchor, plastic, fixing or pipe work clearance holes. Suitable for drilling masonry, brick/block work and stone.

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

It is compatible with impact drills. The CYL-1 Drill Bit is optimised for drilling in masonry. Its 2-flute U-shape provides good dust removal while its standard carbide tip makes the bit more wear-resistant. This product is intended for use in masonry and limestone. Pack of 1 • Optimised for Drilling in Masonry • CYL-1 Drill Bit is optimised for drilling in masonry • 2-flute U-shape provides good dust removal • Standard carbide tip makes the bit more wear-resistant Specifications: Diameter (D) mm: 5,50 Working length (L1) mm: 50 Total length (L2) mm: 85 Materials: Stone Materials in Detail: Masonry

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 1.5mm. Pack of 3Additional Information:• Tip Diameter: 1.5mm• Working Length: 18mm• Overall Length: 40mm• Pack Qty.: 3

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

It is compatible with impact drills. The CYL-1 Drill Bit is optimised for drilling in masonry. Its 2-flute U-shape provides good dust removal while its standard carbide tip makes the bit more wear-resistant. This product is intended for use in masonry and limestone. Pack of 1 • Optimised for Drilling in Masonry • CYL-1 Drill Bit is optimised for drilling in masonry • 2-flute U-shape provides good dust removal • Standard carbide tip makes the bit more wear-resistant Specifications: Diameter (D) mm: 4,00 Working length (L1) mm: 40 Total length (L2) mm: 75 Materials: Stone Concrete Materials in Detail: Masonry Concrete

Milwaukee Contractor series SDS Plus drill bit. Specifications • Shank: SDS Plus • Diameter: 10mm • Length: 160mm

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.7.00mm.Additional Information:• Tip Diameter: 7.0mm• Working Length: 67mm• Overall Length: 107mm• Pack Qty.: 1

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The Faithfull Professional Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user. These drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.This Drill Bit has the following specification:Tip Diameter: 3.5mmWorking Length: 37mmOverall Length: 70mmAdditional Information:• Tip Diameter: …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 5 mm x 85 mm.Additional Information:• Diameter: 5.0mm• Overall Length: 85mm• Pack Qty.: 1

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.23/64in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 3.00 mm Dia. Pack of 2Additional Information:• Tip Diameter: 3.0mm• Working Length: 33mm• Overall Length: 61mm• Pack Qty.: 2

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.8.50mm.Additional Information:• Tip Diameter: 8.5mm• Working Length: 72mm• Overall Length: 117mm• Pack Qty.: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.9/32in.Additional Information:• Tip Diameter: Working Length• Overall Length: Pack Qty.