Drill Bits

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Impakt holder for the absorption of extreme impulse peaks. Special torsion effect due to the double-torsion spring. Comes with a ring magnet that holds even long and heavy screws extremely securely, making it ideal for overhead work. The magnet can be pushed back …

Suitable for Pozidriv screws
Ductile and tough for hard materials
1/4" hexagon drive,Wera connecting series 1
In practical Bit-Box for simple removal

For Phillips screws
Ductile and tough for hard materials
1/4" hexagon drive,Wera connecting series 1
In practical Bit-Box for simple removal

The Wera BTZ 25mm BiTorsion Extra Tough TORX Bits supplied in a Bit-Box, with a slide switch that allows simple and gradual removal and reinsertion of the bits. The transparent reverse side provides an easy contents check. Designed for universal use in drill/drivers. Thanks to the best possible utilisation of the material properties and optimally designed geometry, BiTorsion bits will dramatically extend bit service life. Incorporates Wera's tool finder system, based on coloured band coding for screw profiles (black = Pozidriv red = Phillips etc.) with clear size markings. 1 x Wera Bit-Box 20 BiTorsion Bits TX25 x 25mm 20 Piece

The Wera BTZ 25mm BiTorsion Extra Tough TORX Bits supplied in a Bit-Box, with a slide switch that allows simple and gradual removal and reinsertion of the bits. The transparent reverse side provides an easy contents check. Designed for universal use in drill/drivers. Thanks to the best possible utilisation of the material properties and optimally designed geometry, BiTorsion bits will dramatically extend bit service life. Incorporates Wera's tool finder system, based on coloured band coding for screw profiles (black = Pozidriv red = Phillips etc.) with clear size markings. 1 x Wera Bit-Box 20 BiTorsion Bits TX20 x 25mm 20 Piece

Suitable for Pozidriv screws
BiTorsion zone to absorb peak loads
Considerable reduction in the risk of breakage, significant increase in service life
Ductile and tough for hard materials
1/4" hexagon drive,Wera connecting series 1

High quality bits for recessed TORX® screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with "Take it easy" Toolfinder: colour coding according to profile and size stamp. Features and Benefits: • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure f…

High quality bits for recessed TORX® screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with "Take it easy" Toolfinder: colour coding according to profile and size stamp. Features and Benefits: • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure f…

For Phillips screws
Impaktor technology for above-average service life
Particularly suitable for use with customary impact drivers
Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out
Take it easy tool finder: colour coding according to profile and size

Universal holder for the take-up of bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for very special corrosion protection. The retaining ring ensures an optimum fit of the tool in the holder. The strong permanent magnet holds the bits absolutely securely. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and Benefits: • Stainless sleeve for special corrosion protection • The retaining ring ensures a secure fit of the tool in the holder • Strong permanent magnet holds the bits absolutely securely • 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3 Contents: 1x…

Universal holder for the take-up of bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for very special corrosion protection. The retaining ring ensures an optimum fit of the tool in the holder. The strong permanent magnet holds the bits absolutely securely. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and Benefits: • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) Contents: 899/4/1 Universal Bit Holder, 1/4" x 152 mm

Universal holder for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features an…

Universal holder for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features an…

Wera Impaktor holder for the absorption of impulse peaks. Particular torsion effect thanks to the double-torsion spring. The retaining ring ensures an optimum fit of the tool in the holder. The magnet provides for additional fixing of the bit and screw. The Impaktor stainless holder with retaining ring and magnet meets the extremely dynamic demands by doing without any small, mechanical parts that are often susceptible. Used mostly for industrial assembly applications such as e.g. with screwdriving robots. Output: suitable for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3. Drive: 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and B…

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder for bits with 1/4" hexagon drive, magnetic • 1/4" hexagon drive Contents: 889/4 R Rapidaptor Universal Bit Holder, 1/4" x 100 mm

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • 1/4" hexagon drive Contents: 889/4/1 Rapidaptor Universal Bit Holder, 1/4" x 75 mm

Rapidaptor technology for rapid bit change
Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive
Short version
1/4" hexagon drive
Rapidaptor easy-in, easy-out, rapid-spin, chuck-all
Single-hand technology
Strong permanent magnet

Rapidaptor universal holder for bits with hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, free-turning magnetic sleeve securely holds even large and heavy screws. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and Benefits: • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • Ring magnet and stop sleeve for secure fit of the s…

Rapidaptor technology for rapid bit change
Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive
Ring magnet and stop sleeve for secure fit of the screw on the holder
1/4" hexagon drive

High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for square head socket screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out &…

1 x Wera 867/4 Z Tough TORX Bit TX20 x 89mm Note: Image is for illustrative purposes only and may differ from the actual product

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For recessed TORX® screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • 1/4" hex…

Torsion bits for Pozidriv screws with elastic Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 855/4 B…