Drill Bits

Dewalt DT4772 Extreme Impact Flatwood Drill Bit 26mm x 152mm The Dewalt DT4772 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 26mm 
- Length: 152mm
- Pack Quantity: 1

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 25 x 152mmAdditional Information:• Diameter: 25mm• Overall Length: 152mm• Pack Qty.: 1

HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 115mm Working length. Supplied in a plastic wallet. Features & Benefits: • HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. • Drill has a black oxide finish. • 115mm Working length. • Supplied in a plastic wallet. • Model No. BSB15.0 Specifications: Model No BSB15.0 Brand: Worksafe Size: Ø15 x 170mm

Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet. Features & Benefits: • Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet. • Model No. SS14X400 Specifications: Model No SS14x400 Brand: Worksafe Size: Ø14 x 400mm

These bits have a 118° ground point for fast and accurate drilling. They are milled from a solid steel form which means a higher level of strength and precision. The helicoidal flute improves swarf discharge. Ideal for use on steel, cast iron, aluminium, malleable cast iron, brass and copper. Conforms to DIN338 standard.Features & Benefits• HSS Groundpoint drill bits • 118° ground point for fast and accurate drilling • Milled from a solid steel form for a higher level of strength and precision • Helicoidal Flute to improve swarf discharge • Star Rating: **** • DIN338RN • Suitable for steel, cast iron, aluminium, brass, copper, non-ferrous metal and …

The DT4907 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 5.5mm • Length: 93mm • Working length: 57mm • Pack Quantity: 1

Octagonal shank chisel from selected steel with polished cutting edge. Generally in accordance with BS3066 Contents: 1 x Octagonal Shank Cold Chisel, 19 x 200mm (Display Packed)

Superior quality SDS Plus drill bits suitable for a variety of applications. Drills are fully hardened and ground. Features & Benefits: • Superior quality SDS Plus drill bit suitable for a variety of applications. • Drills are fully hardened and ground. • Model No. SDS15X260 Specifications: Model No SDS15X260 Brand: Worksafe Size: Ø15 x 260mm

The HSS Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through holes and pocket holes. This extremely sharp drill bit with a centring tip allows for exact positioning of the hole. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, its two flutes prevent materials from clogging the hole and easily remove debris. This drill bit is suitable for use on soft and hard wood as well as for laminated boards and MDF. Made of HSS (high-speed steel), this Brad Point Drill Bit is ground from solid metal. Its hexagonal shank system allows for fast and tool-free drill bit changes. It has a hexagonal shank system and is …

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

Dewalt DT4775 Extreme Impact Flatwood Drill Bit 32mm x 152mm The Dewalt DT4775 drill bits are designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and champered outer cutting spurs for razor sharp, clean precise drilling. Features:
- Ideal for door locks, electrical and plumbing work Specification:
- Cutting Diameter: 32mm 
- Length: 152mm
- Pack Quantity: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Milwaukee Hammer Drill Bits have been designed with a 2 cutter carbide tip to allow for drilling into concrete, brick, block and soft material for electrical installations, lighting fixtures and holders. Our Hammer Drill Bits also features a red flute for easy identification along with a wide flute design to remove dust faster, while also reducing heat build-up, resulting in more holes per charge. Specifications • Cutting Width: 10mm • Length: 150mm • Pack Quantity: 1Features & Benefits• Tungsten carbide tipped drill bit allow drilling into concrete, aerated concrete blocks, masonry and granite • Wide red flute for optimal material extraction and easy identifiable …

These brad point drill bits have an SDS Plus shank and are intended for drilling into wood with an SDS Plus drill. The brad point tip helps to ensure accurate starting. Note that these drill bits should only be used with the hammer mode switched off. Specifications • Shank: SDS Plus • Diameter: 10.0mm • Overall Length: 163mm • Working Length: 87mm • Quantity: 1

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 3.5mm • Length: 135mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability …

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless …

This hex shank flat wood drill bit has a precision double ground tri-point for fast waste removal and enhanced cutting performance. Made from hardened and tempered carbon steel. Suitable for drilling holes in softwood, medium hardwood, particle board, plasterboard and plastics. The hex shank prevents the bit from slipping from the chuck, enabling a quick change. Compatible with standard drill drivers and drills with a 10/13mm standard chuck. Specifications: Diameter: 38mm Length: 152mm Shank type: Hex shank Shank size: 6.35mm Type: Double ground Point style: Tri-point Weight: 55g

With an innovative carbide tip design, Stanley SDS-PLUS masonry drill bits power through masonry, concrete, and more with high grade carbide tip that maximizes bit life. The unique flute design of this drill bit allows for efficient dust removal while drilling, resulting in cleaner holes and reduced clogging. This feature not only enhances productivity but also prolongs the lifespan of the drill bit. Featuring a carbide tip, the Stanley SDS Plus Masonry Drill Bit effortlessly penetrates tough surfaces with ease, delivering fast and accurate results every time. This precision drilling tool ensures minimal vibration, reducing user fatigue and ensuring optimal control during operation. Features …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 1.4mm • Length: 40mm • Pack Quantity: 10Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

• Tungsten carbide tipped with optimized geometry for drilling concrete and stone • Vacuum brazed tips for durability • Ground flutes designed for optimum debris removal • SDS-plus shank • Diameter: 10 mm • Working length: 90 mm • Total length: 160 mm Specifications: Diameter = 10mm Working length = 90mm Overall length = 160mm