Welding Electrodes

Features: *100% brand new and high quality. *Soldering tips are suitable for lower temperature soldering. *It is used for soldering at narrow pitches, correction of bridging and drag soldering. Specification: *Type: 900M-T soldering tip *Material: Pure copper *Color: silver *Temperature Range: 200~480℃ *Optional Model: 900M-T-B, 900M-T-I, 900M-T-IS, 900M-T-K, 900M-T-SK, 900M-T-1C, 900M-T-2C, 900M-T-3C, 900M-T-4C, 900M-T-0.8D, 900M-T-1.6D, 900M-T-2.4D, 900M-T-3.2D *Quantity: 5pcs Package Contents: 5*Soldering Iron Tip Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness

Description: Compared to other similar products on the market, this solder wire has the advantages of flow smoothly, low melting point, anti-oxidation, and good solder ability both in electrical conductivity and thermal conductivity. Low melting point solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, circuit board and various kinds of electronics devices. It is made of high-quality tin wire material. The length of this product is 6cm, width is 6cm and height is 3cm. This product is perfectly suitable for IC repair, electrical repair, electronic product, etc. Item Name: Solder Wire Material: Tin Wire Features: Anti-oxidation, Multipurpose, Fast

Specifications: Color:Mixed Material:Stainless Steel Length:9.2cm Model:Desoldering Needles Configuration Size:0.8 1.0 1.2 1.4 1.6 1.8 2.0mm Package includes 8Pcs/box desoldering Hollow needles

6pcs/lot 900M-T Copper Solder Soldering Iron Tips Lead Free Welding Sting for 936 Soldering Station Features: --These tips are made from copper and not electroplated, easy to tin and diamagnetic, suitable for lower temperature soldering. --There are total 6 shapes of soldering tips in this set and you can choose the proper one for different soldering needs. --Don't leave your iron running for hours and hours if you are not using it. This can make the tip get black oxide cover. --Try to tin the tip as it heats. If you leave it on too long or run it too hot it will burn off the solder and go black again. Description: Material: Copper Type: Lead-free Temperature Range: 200-480° Model:

Feature: T-Tip head for soldering iron, pixel repair. Replacement for the digital panel within the instrument panel. Repairing and replacing card LCD ribbon cables. Description: Material: Copper,silicon Tip power：30W、40W、60W Tip length: 5.3cm/2.1in Width: 3.5cm/1.4in Hot press stripe length: 24cm/9.4in Package included: 1pcs Copper T 1pcs Hot Press strip

brand new and high quality brand new and high quality Material: Tin Color: As the picture shows 1 roll cored solder wire The solder wire have been treated by a special technology with oxide removal and antioxidant bearing,have less oxide Solderability,satisfyingly used in wave and iron soldering processes with bright and full soldering points Diameter:0.5mm Sn spec: 60% Flux: 1.2% Size:As the picture shows Quantity: 1 Pc Due to the difference between different monitors, the picture may not reflect? the actual color of the item. Thank you!

Characterization: Copper soldering tips are suitable for lower temperature soldering. Type : 900M Pure Copper Tip Material: Copper Temperature Range: 200-480 degree Model: 900M-T-I, 900M-T-K, 900M-T-B, 900M-T-3C, 900M-T-2.4D These soldering tips are suitable for 936, 937, 938, 969, 8586, 852D soldering stations. In the package5pcs x Soldering Tip

Specification: Brand new Model: HWY-800 Capacity: 20ml Feature: Rapid welding. Suitable for stainless steel galvanized sheet, nickel, copper, iron and other metal welding aids. Non-toxic and environmentally friendly. Convenient to use. Package included: 1 x Stainless Steel Flux Solder The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.

Features: Low solids content for practically no residue. Flux flows smoothly for consistently secure and uniform solder connections with no mess. Rosin residue is non-corrosive, non-conductive, moisture resistant, and fungus resistant. For reworking and touching-up SMT, SMD, PCB and through hole solder joints. Superior fluxing ability, improves soldering performance. Note: 1. If touching skin, please wash it timely to avoid to cause the skin irritation. 2. Please put it on the location, where the children cannot get it. 3. Don't eat it.

10CC NC-559-ASM UV Flux Lead Free Soldering Material Solder Paste No-clean Solder Paste Detail: *This NC-559-ASM Soldering Paste is used for BGA/CSP ball, semiconductor packaging, repair. *No-clean solder paste, very little and colorless residue,without washing. *Suitable for computer motherboard north and south bridge, communications, graphics or other BGA. *Excellent soldering paste, just use a little each time. *Good BGA soldering flux paste and machine regardless of manual welding, the success rate is greatly increased. *Item Condition:100% Brand New *Color: As Pictures Show *Capacity: 10CC *Model:NC-559-ASM Package Contents: 1*NC-559-ASM Soldering Paste Notes:

Please note: 1. Lighter are not included in the product,The picture is just to show the effect,The weight of the product includes the plastic roll. 2. Before welding, please clean the welding surface and remove the oxidized part of the surface 3. If you are welding stainless steel, battery chips, etc., please heat it sufficiently to make the flux in the tin wire fully fuse with the solder, and the welding effect will be better. Specifications： Product name: Solder wire Material: tin lead Quantity: 50g/roll (including plastic core) Color: as shown Wire diameter: 0.8mm Uses: Welding Package includes: 1 roll of 50g soldering wire

Item Name: Soldering Iron Stand Features: Stable Structure, Prevent Scalding, Improve Work Efficiency Material : Metal Size Details: Size: 13cm x 9cm/5.12" x 3.54" (Approx.) Specifications: It can be matched with various electric soldering irons, just insert the soldering iron directly into the flame iron socket along the direction. The length of this product is 13cm and the width is 9cm. What makes it not waste your time and energy is the simple and convenient operation. The reason why it can effectively prevent heat conduction and scalding is that it has the characteristic of high temperature resistance. Made of metal material, it is very durable to use. High-quality and

The lead-free solder paste had transparent residue and low solder ball rate, and excellent wetting ability on PCB. Our pastes are made from environmentally-friendly flux and low oxidation spherical powders, which were characterized by long continuous repeatability printing time, high print definition, excellent solderability, and bright and smooth solder joint. Special formulation designs deliver excellent rheology and high viscosity retention ability even after extended open times. The wide reflow process window of our products is designed to minimize transition concerns from tin-lead to lead-free solder paste. With nearly transparent and no corrosion residue, our pastes gurantees high

Features: *Easy to Carry: Portable and very suitable for outdoor operation. *Reliable Material:The soldering iron tip is made of copper, steel, which is anti rust, serving you for a long time. *Application: Suitable for general soldering applications, point,line and drag soldering, wire tinning. *Easy To Install: This corless battery soldering iron tip is with thread, easy to remove and install. Specifications: *Product Name: Soldering Iron Tip *Material: Copper, Steel *Color: Silver+Gold *Size: (Approx. ) 50 mm/1.97 inches *Optional Tip Type: Tip-B, Tip-C, Tip-K *Suitable for: Soldering iron tip with E10 interface *Quantity: 1pc Package Included: 1 x Soldering Iron Tip Note:

Description: 【Polypropylene Material】Welding rods are made of polypropylene which is dorless, small density, strength, stiffness, hardness and heat resistance are better than low-pressure polyethylene. 【Features】These black welding rods have nice electrical properties and high frequency insulation from humidity, not easy to wear or age. 【Specification】 With 167℃ high melting point, welding rods can be sterilized by steam. Density: 0.90g/cm3, tensile strength: 30MPa. 【Size & Package】The package includes 40pcs welding rods. Each rod is 200mm in length. 40pcs welding rods can meet your multiple needs. 【Wide Application】Plastic welding rods works on fixing cracked car

Features: Very high-wear resistance, seven times wear resistance than steel, four times than PTFE. Very high-inadhesion resistance, the surface of product hardly affixes other material. Mostly using of its high-wear resistance, high anti-impact resistance, anti-cold resistance, self-lubrication, electric characteristic. Good low temperature resistance, in liquefied nitrogen (- 196), it still has the prolongation. Good anti-corrosion resistance, it has very stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity. Specifications: Material:ABS/PP/PVC/PE PP White: 20PCS PP Black: 20Pcs  ABS Beige: 2…

Label:Yes Material: metal iron Packing list: 1pcs soldering iron stand (without Sponge) Use for: Remove solder residue , maintain PCB components clean. Item Type: Soldering Iron Stand Size:As the picture Note: Please allow minor error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Label:Yes Aluminum alloy can't be welded, Basically other materials can be welded. Types: Multifunctional powerful soldering flux Features:Battery welding/Fast welding/Non-toxic and environmentally friendly/Colorless and tasteless Suitable for stainless steel galvanized sheet, nickel, copper, iron, etc. Capacity: 50ml Feature: Rapid welding. Suitable for stainless steel galvanized sheet, nickel, copper, iron ,other metal welding aids and 18650 Battery Welding Non-toxic and environmentally friendly. Convenient to use. Package included: 1 x Stainless Steel Flux Solder Note: Item color displayed in photos may be showing slightly different on your computer monitor since monitors

Feature: In the range of 620-850 degrees, and with silver -based solder, silver brazing copper and copper alloy, copper and stainless steel, can effectively dissolve the various metal oxides, fueling solder overflow. Function: 1. Melting, covering, isolating, preventing oxidation 2. Clean the surface of weld 3. Participation in flow brazing/puddle welding Cautions: 1. Clean oils, oxides and other contaminants of brazing components and solder surface . 2. Before welding, workpiece must be preheated to about 500 degrees and electrode coated with an appropriate amount of brazing flux . 3. After welding, cleaning welds, prevent corrosion of residues solder flux. 4. It should be stored in a dry

Features: * 100% brand new and high quality * Made of high quality material, durable and practical to use * 50ml stainless steel flux solder paste liquid solder tool * Quick welding. * Suitable for welding aid of stainless steel galvanized sheet, nickel, copper, iron and other metals. * Non-toxic and environmentally friendly, easy to use. Specification: * Model: HLY-800 * Capacity: 50 ml(Approx.) * Color: As pictures show * Quantity: 1 Package Contents: 1 * Stainless Steel Flux Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Details: *100% brand new and high quality *20ml stainless steel potion solder paste stainless steel liquid solder tool *Quick welding. Easy to use. *Suitable for welding aid of stainless steel galvanized sheet, nickel, copper, iron and other metals. *Non-toxic and environmentally friendly. *Model: HWY-800 *Capacity: 20 ml *Quantity: 2 bottles Package Contents: 2*Stainless Steel Flux Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

Made from copper coated mild steel. 0.8mm wire supplied as a 700g spool. For welding mild and medium tensile steels for impact toughness down to -20℃. Suitable for use with most MIG welders.PTDDRPDIR29291

Product introduction; 100% brand new and high quality. Instructions; Please use 95% medical alcohol, 75% can not be used. 1. Alcohol should not be poured into a bottle more than 3/4 2. After ignition, squeeze the bottle body lightly, and the flame will eject from the upper tube of the bottle. Overexertion will cause alcohol to overflow the bottle mouth or damage the bottle body. 3. The tilt of the bottle should not be greater than 45 degrees. Alcohol lamp is composed of lamp body, lamp core tube and lamp cap. The heating temperature of the alcohol lamp is 400 - 500 C, which is suitable for experiments where the temperature is not too high, especially when there is no gas equipment. Because

Instructions: 1. Clean the welding tip when the temperature is between 300°C and 360°C. 2. Let the soldering tip and solder abrasives repeatedly rub. 3. Clean the welding tip with solder sponge. 4. The soldering tip is tin-plated. If the effect is not obvious, please repeat the 2-3 steps until the desired effect is achieved. 5. Note: When the solder tip abrasive remains on the solder tip for soldering, the abrasive adheres to the printed circuit board, which may cause erosion and damage to the circuit board. Please clean the abrasive on the solder tip before soldering. weight: Small: 6g Large: 15g The package includes: 1*Cleaning cream Instructions included: Yes Manufacture Country: