Drill Bits

Dewalt DT9526 Extreme 2 SDS Plus Drill Bit 7mm x 210mm The Dewalt DT9526 drill bits are suitable for use on masonry, stone and brick. The optimised flute design allows for clean, precise debris removal and the superior carbide grade calls for longer life and greater durability Features:
- Longer life, faster drilling and greater durability
- Hardened body for extra strength and reduced breakage Specification:
- Diameter:  7mm
- Length:  210mm
- Working Length:  150mm
- Pack Quantity:  1

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like Brickwork Ceramic Tiles Breeze Block Wood Dry Wall Gypsum Board Limestone Slate Marble Eternite Plastics/Reinforced plastics. Length 95mm Diameter 5.5mm Flute Length 49mm

The Bosch 2608833817 SDS Plus-5X Hammer Drill Bit, highly efficient in reinforced concrete and masonry The Bosch 2608833817 is a single SDS Plus-5X drill bit with a diameter of 14.0mm and a working depth of 150mm. SDS Plus bits offer highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming. Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Centring tip guides drilling from the start for efficient work and exact hole diameters
- Geometrical …

Irwin Turbomax HSS Drill (2). Size 7.0 x 109mm. Note: Image is for illustrative purposes only and may differ from the actual product

Expert CYL-9 Multi Construction Drill Bit - up to 5x more precise than a standard drill bit The Bosch 2608900604 has a 4mm diameter, working length of 40mm and an overall length of 75mm with a straight shank. This drill bit is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The modern construction site requires working on many different materials, and you never know what you will need to drill next. Finding the right drill bit can be difficult and time-consuming - unless you have the EXPERT MultiConstruction Drill Bit. The Bosch EXPERT CYL-9 MultiConstruction Cylindrical Drill Bit is the one drill bit that should always be in your toolbox: you'll …

Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 6.0mm.Total length: 110mm.Working length: 50mm. Note: Image is for illustrative purposes only and may differ from the actual product

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like Brickwork Ceramic Tiles Breeze Block Wood Dry Wall Gypsum Board Limestone Slate Marble Eternite Plastics/Reinforced plastics.

Irwin Speedhammer Plus Drill Bit.Specifications:Diameter: 3.5mmTotal length: 110mm.Working length: 50mm.

Ideal for general purpose drilling into most masonry products. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.

Irwin HSS Pro TiN Coated Drill Bit. Size 8.0 x 117mm. Note: Image is for illustrative purposes only and may differ from the actual product

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

Bosch 2608900572 HEX-9 Multi Construction Drill Bit 5.5mm The Bosch 2608900572 HEX-9 drill bit has a 5.5mm diameter and is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 1/4" shank provides optimum power output whilst the carbide centering tip ensures a precise start up and good control. This model is extremely durable thanks to its diamond ground cutting edges. Features:
- Suitable for drilling practically all materials including concrete, brick, wood, plastic, thin sheet metals, ceramic and tile
- 1/4" hex shank for optimum power transfer
- The carbide centering tip ensures a precise start up and good control when drilling
- Diamond-ground …

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

Bosch 2608831034 SDS plus-3 Drill Bit For Masonry 12.0 x 200 x 260mm The Bosch 2608831034 is a single SDS plus-3 drill bit with a diameter of 12.0mm and a working depth of 200mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

The DeWalt innovative EXTREME 2 SDS-Plus drill bit is amongst the best in terms of its speed, life and endurance. Features and Benefits Superior carbide grade for long life and greater durability Optimised flute design allows efficient debris removal Hardened body for extra strength and reduced breakage New tip design ensures better bit penetration, longer life, faster drilling and greater durability Superior carbide grade The widespread use of these DEWALT products by professional tradesmen around the world has made DEWALT the number one selling brand of professional power tools.

Dewalt DT4764 Extreme Impact Flat Drill Bit 13 x 152mmThe Dewalt DT4764 has a 13mm diameter and an overall length of 152mm. The Flat Drill Bit has been designed for drilling wood materials such as chipboard, softwood and hardwood. It has been manufactured with a robust steel shank for increased durability and chamfered outer cutting spurs for razor-sharp, clean precise drilling.Features:
- Ideal for door locks, electrical and plumbing workSpecification:
- Cutting Diameter: 13mm 
- Length: 152mm
- Pack Quantity: 1

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed.

Bosch 2608577176 HSS PointTeQ Twist Drill Bit 12mm The Bosch 2608577176 drill bit is suitable for fast drilling in metal thanks to its PointTeQ tip design. The self-centering tip prevents wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- PointTeQ tip design allows for fast drilling in metal
- Self centring tip
- Made from high speed steel for long life Specification:
- Pack Qty: 1
- Size: 12mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 12 mm Dia.Additional Information:• Tip Diameter: 12.0mm• Working Length: 101mm• Overall Length: 151mm• Pack Qty.: 1

Patented groove point and cutting edge. Parabolic scoop. Increased relief angle. Large shank. Durable design. Images are for illustration purposes only.

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…