115 mm cutting discs

Einhell metal cutting discs for use with angle grinders. Suitable for 115mm angle grinders from Einhell as well as various other manufacturers. Supplied as a pack of 10. Features & Benefits • Thin cutting discs • Suitable for cutting metal • Compatible with most 115m angle grinders • Pack of 10 discs Specifications • Disc Diameter: 115mm • Bore: 22.23mm • Thickness: 1.0mm • Pack Quantity: 10 Contents • 10 Discs

Part of the KWB by Einhell accessory range, these diamond blades are suitable for cutting hard materials such as stone, ceramics, concrete and tiles. They are designed for improved efficiency with cordless machines, enabling you to complete more cuts per battery charge. Features & Benefits • Diamond blade for angle grinders • Compatible with 115mm angle grinders from Einhell and most other standard 115mm angle grinders • Continuous rim: suitable for clean cuts in tiles • Optimised for energy saving use in cordless tools - helps to prolong runtime Specifications • Diameter: 115mm • Bore: 22.23mm • Thickness: 1.2mm • Quantity: 1

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork. Manufactured to EN 13236 Standards.This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 3Additional Information:• Diameter: 115mm• Bore: 22.2mm

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork. Manufactured to EN 13236 Standards.This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 1Additional Information:• Diameter: 115mm• Bore: 22.2mm

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the work piece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS ? Read the manufacturer's instructions carefully? Wear goggles to guard against flying chips or dust? Inspect the condition of the wheel frequently? Adjust the guard to deflect sparks and dust? Maintain the revs …

The Faithfull Porcelain Series Diamond Blades are ideal for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also be used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236.This Faithfull Porcelain Diamond Blade has the following specification: Disc Diameter: 115mmBore: 22.23mmMax. rpm: 13,300Additional Information:• Diameter: 115mm• Bore: 22.23mm

The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC. These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.Pack of 10 Faithfull Multi-Purpose …

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …

The Faithfull Professional Trade Level Diamond Blade with 10mm sintered segments allowing for a longer working life and less blade changes. The aerated core allows for better cutting performance and aids cooling. Ideal for cutting materials of medium hardness commonly found on the worksite such as class B engineering bricks, concrete kerbs, concrete lintels and beams, reinforced concrete, building blocks, roofing tiles, 30-60 newton block paviours, York stone, concrete pipes and other less abrasive materials.Blade Diameter: 115mm.Bore Size: 22.2mm.Segment Height: 10mm.Additional Information:• Diameter: 115mm• Bore: 22.2mm

The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate. Blade Diameter 115mm Bore Size 22.2mm Segment Height 10mm.

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 115mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. For use with a 115mm angle grinder. Max. Speed: 80m/s 13,300 RPM.Additional Information:• …

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc A40 115mm. 40 grit is suitable for rough grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. For use with a 115mm angle grinder. Max. Speed: 80m/s 13300 RPM.Additional Information:• …

The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 115mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. For use with a 115mm angle grinder. Max. Speed: 80m/s 13300 RPM.Additional Information:• …

Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Additional Information:• Size: 115mm• Grade: Coarse

Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cutting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 115mm • Thickness: 1.3mm • Arbor: 22.23mm

The Makita A24 depressed centre grinding disc is perfect for grinding steel and dressing welds. Specifications • Diameter: 115mm • Bore: 22.2mm • Thickness: 6mm • Pack Quantity: 1

Heavy duty depressed centre grinding disc. Specifications • Grit: A24R-BF • Bore: 22.23 mm • Diameter: 115 mm • Thickness: 6 mm • Pack Quantity: 1

A27 series Pro Metal grinding discs for angle grinders. Specifications • Diameter: 115mm • Quantity: 1

Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stearic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …