115 mm cutting discs

Bosch Universal Diamond 115mm 2608615057

Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …

from £7.95

Bosch Expert X Lock Inox 115mm 1.6mm 22mm 2608619260

Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …

from £1.22 up to £1.95

Makita Diamak Diamond Segmented Rim 115mm D-61123

Powerful Cutting Performance - The X-LOCK Expert for Inox Cutting Disc delivers powerful cutting performance in Inox with maximum safety. The disc is made of premium super-hard aluminium oxide with fu more→nctional fillers and additives to reduce heat generated while cutting. This produces good quality surface results and ensures a long disc-performance lifetime. In addition, the disc is free of ferrous, sulphurous and chlorinated fillers. Maximum work safety is ensured thanks to the precision-manufactured fibreglass net. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is …

from £6.95

Makita Pro Thin for Stainless Steel 115mm Pack of 10 B-12217

Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1

from £12.85 up to £12.99

Makita X Lock Diamond 115mm E-02060

These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs

from £28.95

BlueSpot 3 Piece Flap Disc Set 115mm 115mm Assorted 19642

The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …

from £7.49

BlueSpot Flap Disc 115mm 115mm 120g 19696

These Blue Spot Sanding Flap Discs are suitable for efficient stripping and sanding of metal and wood surfaces. They are ideal for finishing. This 3 piece set includes the following:40 Grit, 60 Grit a more→nd 120 Grit. Each sanding flap disc has the following specifications:Diameter: 115mm.Bore size: 22.2mm.Max speed: 13,300/min, 80m/s.Additional Information:• Diameter (mm): 115

from £1.49

BlueSpot Flap Disc 115mm 115mm 40g 19690

Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 120 Grit.Additional Information:• Dia more→meter (mm): 115• Grit: Very Fine

from £1.49

BlueSpot Flap Disc 115mm 115mm 60g 19692

Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 40 Grit.Additional Information:• Diam more→eter (mm): 115• Grit: Coarse

from £1.49

BlueSpot Flap Disc 115mm 115mm 80g 19694

Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 60 Grit.Additional Information:• Diam more→eter (mm): 115• Grit: Medium Coarse

from £1.49

Bosch 115MM P40 X-Lock Flap Disc X571 Best for Metal - Conical O (Type 29)

Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 80 Grit.Additional Information:• Diam more→eter (mm): 115• Grit: Medium Fine

from £2.29 up to £2.49

Bosch 115MM P40 X-Lock Flap Disc X571 Best for Metal Flat On Pla (Type 27)

The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear-resistant for extensi more→ve metalwork Features & Benefits: Changing flap discs is fast and convenient due to the keyless X-LOCK system Powerful thanks to Zirconia/semi-friable aluminium oxide Consistent high material removal rate over the lifetime of the disc Highly tear-resistant YX cotton fabric Typical Applications: Especially suitable for working on stainless steel, steel, cast iron, and sheet metal for working on edges/welded seams and surface sanding at a work angle of 15-25

from £2.49 up to £2.99

Bosch 115MM P60 X-Lock Flap Disc X571 Best for Metal - Conical (Type- you

The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear-resistant for extensi more→ve metalwork Features & Benefits: Changing flap discs is fast and convenient due to the keyless X-LOCK system Powerful thanks to Zirconia/semi-friable aluminium oxide Consistent high material removal rate over the lifetime of the disc Highly tear-resistant YX cotton fabric Typical Applications: Especially suitable for working on stainless steel, steel, cast iron, and sheet metal for working on edges/welded seams and surface sanding at a work angle of 15-25

from £2.29 up to £2.49

Bosch 115MM P60 X-Lock Flap Disc X571 Best for Metal Flat On Pla (Type 27)

The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear-resistant for extensi more→ve metalwork Features & Benefits: Changing flap discs is fast and convenient due to the keyless X-LOCK system Powerful thanks to Zirconia/semi-friable aluminium oxide Consistent high material removal rate over the lifetime of the disc Highly tear-resistant YX cotton fabric Typical Applications: Especially suitable for working on stainless steel, steel, cast iron, and sheet metal for working on edges/welded seams and surface sanding at a work angle of 15-25

from £2.49 up to £2.99

Bosch 115 X 1MM X-Lock Expert for Inox + Metal Flat

The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear-resistant for extensi more→ve metalwork Features & Benefits: Changing flap discs is fast and convenient due to the keyless X-LOCK system Powerful thanks to Zirconia/semi-friable aluminium oxide Consistent high material removal rate over the lifetime of the disc Highly tear-resistant YX cotton fabric Typical Applications: Especially suitable for working on stainless steel, steel, cast iron, and sheet metal for working on edges/welded seams and surface sanding at a work angle of 15-25

from £1.49

Bosch 2608600318 115 x 22.2 x 2.5mm Metal Flat- you get 25

X-LOCK 2-piece changing system to switch angle grinder accessories with just one click. The X-shaped interface of the grinders head and the accessory allows easy and effortless mounting. Features and more→Benefits: Convenient X-Lock locking system for quick and safe changes. Manufactured for use with stainless steel (iron, chlorine and sulphur-free) Fast and clean cuts without burr formation or blue discoloration Quick efficient cutting with minimum material removal and machine wear Achieve straight and accurate cuts Typical Applications: Used across a broad range of industries including Automotive, Foundry, Fabrication, Aerospace and Construction Cutting discs must never be used for grinding …

from £1.49 up to £2.09

Bosch 2608602201 Standard For Ceramic Diamond 115mm

Not available.

from £5.95 up to £7.00

Bosch 2608602384 Multi Construction Rapido Straight 115mm

Bosch 2608602201 Standard For Ceramic Diamond Cutting Disc 115mmThe Bosch 2608602201 Diamond Cutting Disc is designed for use on ceramic and tile. You can expect exact accurate cutting results in all more→types of tile thanks to its continuous cutting rim.Features:
- To be used with an angle grinder
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecification:
- Diameter: 115mm
- Cutting width: 1.6mm

from £1.43 up to £2.49

Bosch 2608602615 115x22.23mm Diamond Disc Expert Abrasive LPP

These long-lasting, high speed cutting discs from Bosch can be used to cut metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics Features:
- ACS 60 V BF specification more→r /> - Straight cutting
- Cut virtually everything without disc changes
- For metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics Specification:
- Diameter (mm): 115
- Bore diameter (mm): 22.23
- Thickness (mm): 1.0
- Qty: 1

from £12.95 up to £12.99

Bosch 2608602651 115x22.23mm Diamond Disc Best Concrete HPP

Not available.

from £39.99 up to £43.95

Bosch 2608602689 115x22.23mm Diamond Disc Best Marble HPP

Not available.

from £30.99 up to £33.95

Bosch 2608603254 115 x 1 x 22.23mm Inox

Not available.

from £6.95 up to £14.39