Drill Bits

Bosch flat bits with threaded self-feeding tips and 1/4" hex shanks. Features & Benefits• 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood w more→ith minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Bosch HSS-Co Cobalt 3.2mm Pack of 1

from £3.00

Compare prices₆→

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Bosch HSS-Co Cobalt 3.3mm Pack of 1

from £3.00 up to £3.59

Compare prices₆→

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Draper HSS , 8.5mm

from £2.84 up to £4.19

Compare prices₆→

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

Draper HSS , 9.5mm

from £2.95 up to £4.50

Compare prices₆→

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.

Draper HSS , 5/16"

from £2.16 up to £3.05

Compare prices₆→

Expert Quality, high speed steel twist drills. Display packed.

Draper HSS Extra Long , 9.0 x 170mm

from £2.95 up to £6.46

Compare prices₆→

Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Display packed.

Draper 8.5mm HSS Twist Drill for 10 x 1.5 Taps

from £2.28 up to £3.16

Compare prices₆→

Expert Quality, a selection of metric-sized high speed straight shank twist drills specifically for drilling holes prior to tapping. Display packed one drill per card (sizes 4.2-10.2mm) and two drills more→per card (sizes 1.6-3.3mm).

Draper Masonry , 10 x 120mm

from £2.42 up to £3.50

Compare prices₆→

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

Draper Expert Flat Wood Bit, 10mm

from £2.95 up to £3.58

Compare prices₅→

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high q more→uality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

Draper Expert Flat Wood Bit, 6mm

from £2.95 up to £3.44

Compare prices₅→

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high q more→uality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

Draper Expert Flat Wood Bit, 8mm

from £2.95 up to £3.44

Compare prices₅→

Expert Quality, flat wood bits with a precision ground central point and enhanced design cutting edge spurs, which deliver greater waste removal compared with standard flat wood bits. Made from high q more→uality carbon steel that's correctly hardened and tempered. Each cutting edge is expertly ground and finished for maximum performance. Ideal for use with combi drills, drill drivers and impact drivers. All sizes have a strong 6mm shank.

Draper Flat Wood Bit, 20mm

from £2.95 up to £3.09

Compare prices₅→

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Draper Flat Wood Bit, 22mm

from £2.95 up to £3.33

Compare prices₅→

Flat wood drill bits manufactured from hardened and tempered carbon steel. Display packed.

Draper SDS+ Masonry , 5.5 x 160mm

from £2.18 up to £3.00

Compare prices₆→

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Draper SDS+ Masonry , 5.5 x 210mm

from £2.42 up to £3.54

Compare prices₆→

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Draper SDS+ Masonry , 5.0 x 160mm

from £2.16 up to £2.98

Compare prices₆→

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Draper SDS+ Masonry , 7.0 x 160mm

from £2.35 up to £3.39

Compare prices₆→

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

Draper Spare HSS Holesaw Pilot Drill for HSA1 and HSA/SDS, 6.35 x 81mm

from £2.95 up to £3.14

Compare prices₅→

Expert Quality, for use with Holesaw Arbors Stock Nos. 52982 and 52992. Size: 1/4" - 6.3mm diameter x 81mm long. Display packed.

Draper HSS Titanium , 8.5mm

from £2.74 up to £4.11

Compare prices₆→

Metric-sized high speed steel bits with Titanium added providing extra strength and durability. Display packed.

Draper HSS Titanium , 9.0mm

from £2.95 up to £4.71

Compare prices₆→

Metric-sized high speed steel bits with Titanium added providing extra strength and durability. Display packed.

DeWALT Black and Gold Hex Impact HSS 3.5mm Pack of 1 DT20603

from £2.95

Compare prices₄→

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. F more→eatures & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20603-QZ • Diameter: 3.5mm • Quantity: 1

DeWALT Black and Gold Hex Impact HSS 3mm Pack of 2 DT20602

from £2.95

Compare prices₄→

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. F more→eatures & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20602-QZ • Diameter: 3mm • Quantity: 2

DeWALT Black and Gold Hex Impact HSS 4.5mm Pack of 1 DT20605

from £2.95

Compare prices₄→

Dewalt Black & Gold Hex Impact HSS Drill Bits are impact rated drill bits which are suitable for use in impact drivers as well as standard drills. Suitable for drilling into metal, wood and plastic. F more→eatures & Benefits • Impact rated: suitable for drills and impact drivers • Standard sized (1/4") hex shank • Tough Core for increased durablility • Split point for accurate starting with reduced walking • Black & Gold finish protects against rust Specifications • DeWalt Product Code: DT20605-QZ • Diameter: 4.5mm • Quantity: 1