Drill Bits

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size.9.50 mm Dia.Additional Information:• Tip Diameter (mm): 9.5• Working Length (mm): 81• Overall Length (mm): 125• Pack Qty.: 1

Features and Benefits • 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Stanley Fatmax Precision Metal Drill Bits are pilot point tipped for precise, accurate drilling on contact with the material. Sharp cutting edges for faster drilling and clean holes. With its HSS construction, these drill bits offer exceptional durability and superior performance. The HSS material ensures the bits longevity even under heavy use. The CNC design allows for precise and accurate drilling, resulting in clean and perfectly round holes. This ensures minimal damage to the workpiece and reduces the risk of the hole being misaligned or uneven. Features & Benefits • For use with corded and cordless hammer drills • For very fast, accurate drilling in soft steel, non-ferrous …

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø16 x 100mmDimensions: Length: 5mm x Height: 175mmWeight: 0.076KgWarranty: Consumable

A great and versatile all-around drill with a 118° conventional point, which provides strength and is easy to regrind, making it very cost-effective. Usable for hand-held and machine drilling. Steam tempered finish retains cutting fluid and prevents chip tool welding. Suitable for many materials. Features and Benefits • Shank: Cylindrical shank Specifications Hand (Cutting direction): Right Cutting diameter tolerance class (TCDC): h8 Basic standard group (BSG): DIN 338 Material code (BMC): High Speed Steel Point Angle (SIG): 118° Material Application Priority Usage: K - Cast Iron, P - Steel and cast steel Country of origin: Brazil Spiral form: Standard Spiral Coating: Steam Tempered Brand: Do…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135° non-slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP100PRO Professional Jobber Drill Bits have the following specifications: Diameter: 1.0mm.Pack quantity: 3.Additional Information:• Tip Diameter (mm): 1• Working Length (mm): 12• Overall Length (mm): 34• Pack Qty.: 3

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened and has a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø6 x 235mmDimensions: Length: 5mm x Height: 330mmWeight: 0.04KgWarranty: Consumable

The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP150LS Pre Pack HSS Jobber Drills Long Series 1.5mm have the following specifications:Diameter: 1.5mm. Overall Length: 70mm. Pack quantity: 2.Additional Information:• …

Expert Quality, high speed steel twist drills. Display packed.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-14 Flat Bit 14mm

A great and versatile all-around drill with a 118° conventional point, which provides strength and is easy to regrind, making it very cost-effective. Usable for hand-held and machine drilling. Steam tempered finish retains cutting fluid and prevents chip tool welding. Suitable for many materials. Features and Benefits • Shank: Cylindrical shank Specifications Hand (Cutting direction): Right Cutting diameter tolerance class (TCDC): h8 Basic standard group (BSG): DIN 338 Material code (BMC): High Speed Steel Point Angle (SIG): 118° Material Application Priority Usage: K - Cast Iron, P - Steel and cast steel Country of origin: Brazil Spiral form: Standard Spiral Coating: Steam Tempered Brand: Do…

• Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type.• Fully hardened with a screw point to aid location and smooth drilling.• Supplied in a plastic wallet.Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.Technical Specification:Size: ø13 x 155mmDimensions: Length: 10mm x Height: 220mmWeight: 0.094KgWarranty: Consumable

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

Features and Benefits • 1/4" hex shank prevents slippage in drill chucks • Self feeding tip pulls the bit through the wood with minimal exertion • Spade designed for rapid chip removal • Hole for running cables etc

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60. Manufactured to BS 3066.