Other for Motorcycles

With each pair of heated gloves, two 7.4V batteries are included, along with a micro USB 2-in-1 charging cable (excluding USB port).The batteries can easily be plugged into the incorporated cable within the gloves and taken out of their designated pocket on the underside of the cuff.Keeping them in place is a pocket with a hook-and-loop closure with quick in-and-out access.Depending on the heat level riders need, these are the approximate times they will work for:MODE 4:100% - Red - Boost - 150 minutes (2,5 hrs)MODE 3:75% - Orange - High - 225 minutes (3,75 hrs) MODE 2:50% - Yellow - Medium - 300 minutes (5 hrs)MODE 1:25% - White - Eco - 375 minutes (6,25 hrs)Charge time takes approximately …

The Maglock Helmet / Air Hose Connector Kit is a specialised system designed to secure ducting hose to forced air helmets effectively, ensuring a reliable air supply. It utilises magnets to seamlessly connect the helmet's intake to the ducting hose, enhancing both safety and comfort through its innovative design.Explore the detailed features of this connector kit:Magnetic Connection Technology: Employs robust magnets with a 20lb holding force to guarantee a highly secure yet easily detachable link, crucial for quick driver changes during races and emergency exits.Material Composition: Crafted from a nylon-infused ABS material, this lightweight yet sturdy component minimises helmet weight to

The Maglock Helmet / Air Hose Connector Kit is a specialised system designed to secure ducting hose to forced air helmets effectively, ensuring a reliable air supply. It utilises magnets to seamlessly connect the helmet's intake to the ducting hose, enhancing both safety and comfort through its innovative design.Explore the detailed features of this connector kit:Magnetic Connection Technology: Employs robust magnets with a 20lb holding force to guarantee a highly secure yet easily detachable link, crucial for quick driver changes during races and emergency exits.Material Composition: Crafted from a nylon-infused ABS material, this lightweight yet sturdy component minimises helmet weight to

Features:- A stylish and well built lift stand.- Made of steel with superior protection in DTC.- Anti-slip material on the top.- Lifting system with gearing for minimal effort.- Innovative design.Specifications:- Weight: 5,50 kg- Minimum height: 30cm- Maximum Height: 40cm

This Twin Air paddock carpet is a key to keep your own stand clean. It is special for mechanics, with waterproof rubber base and top of ultra-durable and washable fabric, ideal for work and not dirty surfaces or lose any piece, approved for use in competition and easily washable. Specifications:- Dimensions: 200 x 100 cm.

Reference D0B29KL.SHAD offers 3 break lights compatible with different case models.Thus, all cases can incorporate a break light.They are easy to install, as they can be directly coupled on to the lower part of the rack.

Complete kit of seals and bearings for front wheel repair.

Complete kit of seals and bearings for front wheel repair.

Complete kit of seals and bearings for front wheel repair.

Gun for diesel supply (ref.53697).Gun for diesel supply.Maintenance.Tanks and meters.J.B.M Range section for professionals in tools and accessories.

Scratch resistant shield. Compatible with: K5 S, K3 SV (XS-S-MS). 190° horizontal field of view Anti-scratch High impact protection (up to 3 mm thick) Max Pinlock not included Max Pinlock ready Race use only (Only for Iridium visors) UV protective Compatibility: K-3 SV;K-5 S Colour: Blue Original Colour by Producer: Iridium Blue Pinlock: Ready Size: 2XL;ML;L;XL Made in: Italy Designed in: Italy Material: Polycarbonate Type of Product: Visor

Maintenance - Mounting Stands.Floor Mat 200x80 cm.

Maintenance - Mounting Stands.Floor Mat 200x80 cm.

Maintenance - Mounting Stands.Floor Mat 200x80 cm.

Maintenance - Mounting Stands.Floor Mat 200x80 cm.

Stylish and well built lift stand.Made of steel with a soft top of plastic to prevent the bike from slipping of the stand, The top is exchangeable.Lifting system with gearing for minimal effort and a 2-position system that makes it possible to lift the stand to a higher position if needed.Innovative design.Made in the EU.Weight:5,50 kg.Minimum height:30cm.Maximum Height:39,5cm- 41,5cm.

Stylish and well built lift stand.Made of steel with superior protection in DTC.Anti-slip material on the top.Lifting system with gearing for minimal effort.Innovative design.Made in the EU.Weight:5,50 kg.Minimum height:30cm.Maximum Height:40cm.

Features:- Strong Aluminium Grand Prix Bike stand- Made by Aluminium Light Alloy- Entirely Welded Hand-Made With Tig Technology- Complete of with beech-wood board- Crystall Graphic Applied