Welding Helmets Controls

Colour: Black and grey Cover dedicated to be used with Speedglas face shields and Welder's Helmets as an additional protection against Sparkles and spatters that are Created during the process of gas and electric welding It meets requirements of EN11611 standard Item Package Quantity: 1

1. 50 Magnification 2" x 4-1/4" Fits ESAB welding helmets Cheater lens for use with Sentinel Welding Helmet. Package of 1

Premium Quality Welding Apron / Welding Sleeves / Gauntlets Made from split cowhide leather with DuPont Kevlar seams Fully stitched frame with no exposed seams and all through DuPont Kevlar seams.

This Helmet now replaces the ESAB Albatross Helmet. The ESAB F20 has a flip up front in to which a welding glass can be fitted. 90 x 110mm flip front DIN 10 CE approved according to EN175.

2 x spare welding lenses (Shade 11) for Draper Stock Nos 76713 and 76714 welding helmets.PTDDRPDIR35266

This welding headshield features a fixed shade and provides a tough hard wearing design. Suitable for ARC and MIG welding.

The special 9100XXi silver front panel houses external controls, enabling fast and easy access to the grinding and memory modes. Possible to lock-in any shade, e.g. in the light state 3 when grinding. Delay function to set the dark-to-light opening time. New optical solution makes the filter view seems lighter, more detailed and colourful. Auto-ON/OFF

Speedglas 100 High impact resistance over a wide temperature range Outer attachment washers, extra scratch resistant (pack of 10) 140 x 85 mm Must be replaced if they have nicks or scratches

The inner cover plate is designed to protect the inside surface of the filter from spark and spatter. Can be used to increase +2 dark shades of the welding filter Failure to use an inside protection plate with the filter voids if spark or spatter cause damage to the glass. Regularly clean with a soft cloth and replace if any pits or scratches occur Fit 3M Speedglas Welding Filter Series 100 and the older welding filter models: 9002D/9002V filters. Size 42x91 mm.

PAPR (Powered Air Purifying Respirator) system with auto darkening welding helmet. Large viewing area of 98mm x 55mm. True colour technology for improved depth perception allowing far greater welding precision. Lithium battery powered respirator unit provides the user with a constant filtered stream of air to their head and face for up to approximately 5 hours. The filter is designed to reduce or remove dust and particles but not vapours and gases. The kit meets performance class TH2 (Less than 2% inward leakage) according to EN 12941:1998/A2:2008. Adjustable airflow settings of 150/180L/min. Features an audible alarm to alert user of low battery/low airflow. Welding helmet has adjustable

This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level. The dark shade, sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides good visibility of the weld zone. It is suitable for TIG, MIG and arc welding, plasma cutting and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.Specification:Suitability: TIG, MIG, arc, grinding and plasma cuttingLens size: 92.5 x 42.5mmShade levels: 4 and 9-13Lens switching time: 3/10,000sARC sensors: 2Sensitivity control: Rotary …

Mounting kit for strap for Speedglas head Speedglas 9100 fx-v – X XX For helmets: Speedglas 100 V Speedglas SL

Welding mask with lift-up face shield. Spare lens available - Part No. 3093. CE certificated. Lens 50mm x 108mm (2" x 4 1/4").Lift up welding mask. Suitable for MIG, TIG and Arc welding.Lens size 50 x 108mm (2" x 4 1/4").Spare lens (50mm x 108mm) - Part No 3093.CE certificated. Covered by British Standard BS EN 175:1997.Impact resistant Polypropylene.

External shading degree adjustment from DIN 9 according to DIN 13 and optical class 1/1/1/2. Delay and sensitivity can be adjusted from the inside Four arc sensors to increase the response rate of the filter, self-darkening Larger range and larger field of view with dimensions 100 x 50 mm (3.93 x 1.96 inches) for easy orientation in space ✅ The sensitivity setting is useful for low TIG/TIG welding by electricity. This allows a better filter response to darker the light of the arc With the delay setting, you can set the time interval during which the glass turns off the welding arc. A short delay speeds up work during the execution of staple connections, while a longer delay is useful when hi…

Replacement P3 air filter for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518).PTDDRPDIR04876

Replacement PC visor for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518). Contents:1 x Visor for use with Welding Helmet - Stock No. 02518Replacement PC visor for use with the Air-Fed PAPR Auto-Darkening Welding Helmet (Stock No. 02518)