Media Converters

Complies with 802.3u 10/100Base-TX, 100Base-FX standards.-Ability to configure the switch for Half-Duplex / Full-Duplex transfer modes for the FX port.-Increases the range of fiber optics up to 20 -60km.The MC110CS is a multimedia converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.Designed to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is used with single-mode fiber optics using the SC connector.The MC110CS supports shortwave (SX) laser at a full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (without the need for a rack or with TP-LINK´s 1…

Highlights: • Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards • Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely • Adopts Wdm Technology Transmitting And Receiving Data On One Single Fiber     What This Product Does The Mc111cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Adopting Wdm Technology Mc111cs Takes Only One Fiber Cable To Transmit And Receive Data Which Will Save Half Cabling Cost For You. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc111cs Is Designed For Use With Single-Mode Fiber Cable Utilizing …

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data.…

TP-Link Gigabit WDM Media Converter

What This Product DoesN/ATL-FC311B-20 is a gigabit media converter providing a gigabit RJ-45 port and a gigabit SC fiber port which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.N/AN/AHow This Product WorksN/ATL-FC311B-20 adopts WDM (wavelength division multiplexing) technology helping send and receive data at a distance of up to 20 km with only a single mode fiber which saves half of the cable deployment cost for customers. TL-FC311B-20 transmits data at 1310 nm wavelength and receives data at 1550 nm wavelength on optical fiber. Therefore …

FEATURES:- Gigabit Ethernet media converter, multimode SC connector, 850nm, up to 0.5km- Solution for optical data transmission- Range: up to 0.5 km- Sends data in high quality and additionally offers highest reliability- Fast transmission in the Gigabit range- The media converter provides a solution for the migration of copper and fiber optic signals. It allows you to access fiber optic technology and bridge several kilometers without replacing your entire network cabling.

TP-Link FC111PB-20 network media converter 100 Mbit/s Single-mode Black

HPE X121 1G SFP LC SX Transceiver network media converter

Digitus Fast Ethernet Media Converter, RJ45 / SC

Digitus Fast Ethernet Media Converter, RJ45 / ST

Trendnet TFC-PGSFP network media converter 2000 Mbit/s Black

Convert And Extend Different Networks Over A Gigabit Fiber Cable Connection Using The Sfp Of Your ChoiceThis Fiber Media Converter Offers An Easy Cost-Effective Way To Extend Your Network Over Fiber Using The Sfp Of Your Choice. It Converts A Copper Rj45 Ethernet Connection To Gigabit Fiber To Extend Your Network Over Longer Distances Or Connect Workstations To Switches. The Converter Provides A Powerful Networking Solution For Campuses Businesses Government Facilities Stadiums Or Other Areas Requiring Network Access.A Cost-Effective Extension And Flexible PerformanceThe Gigabit Fiber Media Converter Provides A Cost-Efficient Way To Connect Your Ethernet Network To Remote Devices Over A Fiber …

Digitus Gigabit Media Converter, RJ45 / SFP

Digitus Fast Ethernet Multimode/Singlemode Media Converter SC/SC

LevelOne RJ45 to SC Fast Ethernet Media Converter, Multi-Mode Fiber, 2km

This Ethernet to MM Fiber Media Converter creates an economical cost-effective Ethernet-fiber link transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.

The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles) providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber while delivering solid network performance and scalability.

The At-Spsx Offers A Short-Haul Option To Extend Your Network To 550 M.

LevelOne RJ45 to SFP Gigabit Media Converter

Digitus Gigabit Multimode/Singlemode Media Converter SC/SC

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over …

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over …

Allied Telesis AT-MC101XL network media converter 100 Mbit/s

Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber

This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.

The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles) providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber while delivering solid network performance and scalability.

Easy to setup and install this compact value-conscious …

PLANET 802.3at PoE+ PD network media converter 2000 Mbit/s Black