Chains & Reciprocating Saw Blades

Replacement chain for Einhell GE-HC 18 Li T cordless pole pruner. Genuine Einhell part. Specifications • Length: 200mm

The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines. This IRWIN Construction Circular Saw Blade has the following specification Blade Diameter 184mm. Bore 16mm. Teeth 24. Kerf Thickness 2.5mm. Tooth Config ATB.

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMCH049 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guidebar slot 0.375 mm and Low profile (L/P) 1.1 mm guidebar slot This chain is made to fit the Black & Decker / Talon ranges and suit saws with a 35 cm bar and chain with 49 drive links including:GK1435T / CS38Additional Information:• Bar Size: 35cm• Links: 49

20BPX low vibration Oregon MICRO-CHISEL chainsaw chainOregon BPX chainsaw chains have smaller radius corners for simple maintenance and superb performance and are an ideal and popular choice of chain for all kinds of cutting work from arborists, commercial cutters and occasional usersRecommended for saws of 38cc to 58cc and bars from 11" to 20" (28 to 50cm)Features:- Bumper drive links reduce kickback- Vibe-Ban chassis design reduces vibration 25% or more at the handles- Lubrilink tie straps help keep oil where it is needed-on the chain- Lubriwell oil holes in all drive links help carry oil around the full length of the guide bars groove- Top plate witness mark makes accurate sharpening easierSpecification:Number …

The FS 200 AB Flush cutting saw blade has a SDS fitting for tool-free saw blade changes. It is compatible with all Bosch Power Tenon Saw GFS 350 E Professional saws.Features:- FS 200 AB Flush cutting saw blade ensures precise, tear-free cuts in wood while maintaining a high surface quality- HCS saw blade with hardened teeth for clean results- Fine teeth provide accurate cut on both left and right sides of material- SDS fitting for tool-free saw blade changes- For use in soft and hard woodSpecifications:Materials: - Softwood- Hardwood- FS 200 AB- Material: HCS- Length of teeth mm: 200- Tooth pitch mm: 1.25

Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.

The Faithfull TCT Cordless Trimsaw Blade has Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance, and laser cut expansion slots to reduce heat build-up. The blade is specially designed for use with hand-held cordless saws, and this range includes blades for fast cutting, and fine finishing on all types of timber and man-made boards.

Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.

Upgrade Your Woodworking Efficiency with the Dewalt DT10640 Extreme Framing Circular Saw Blade Discover the Dewalt DT10640 Extreme Framing Circular Saw Blade, an essential part of the Elite Series designed to elevate your woodworking projects. Crafted to last, this 165mm, 40-tooth blade is ideal for precise decorative wood cutting such as skirting boards, dado rails, and architraves. The ultra-sharp carbide teeth and anti-vibration slots provide a superior cut finish, reducing splintering and ensuring precise results. The anti-kickback design reinforces the carbide tip for enhanced impact resistance, making every cut smooth and accurate. Made with premium-grade carbide, this blade can be easily re…

Pack of 5 Faithfull S1122HF Bi-Metal Sabre Saw Blades Demolition 200mm 10 TPI

DEWALT Bi-Metal Reciprocating Blades for universal use. They have a bi-metal construction, combining HCS and HSS for increased flexibility and durability. With cobalt-alloyed M2 HSS cutting edges for increased wear resistance. The reinforced tooth shoulder provides improved stability. Suitable for general purpose use in wood, metal, tough plastic and sandwich materials. These blades are particularly ideal for use in tough plastics and pipes, 3-12mm thick. Universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo, Skil. Pack of 5 DEWALT Bi-Metal Reciprocating Blade for Plastic & Pipes 152mm Specification Length 152mm Pitch 1.8-2.5mm Pipe Diameter 3-12mm

Make fast, accurate cuts with The Dewalt DT10304-QZ Circular Saw Blade The Dewalt DT10304-QZ circular saw blade is ideal for cutting plywood, natural wood and MDF. The premium-grade Carbide construction with precision ground tips ensures long life and durability with ultimate sharpness to reduce splintering. The optimised face shear and face grind are designed to create fast, accurate cuts and body slots dampen vibration to improve the cutting feel and performance while reducing noise. Features:
- Precision-ground tip
- Ultra-sharp Carbide teeth reduce splintering
- Premium grade Carbide for longer life and durability
- Optimised face shear and face grind for fast, accurate cutting …

Trend CSB/16540T CraftPro Saw Blade 165mm x 40 Teeth x 20 Thin This sawblade is intended to be used in a portable or stationary sawing machine. CraftPro Tungsten Carbide Tipped Trimming / Crosscut Sawblades are designed for a medium to fine finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. With more teeth which is preferred for cutting across the grain of hard and soft wood. Finer finish and a slower feed rate. Features quality carbide tips for high wear resistance. Compatible with all sawing machines though bushing washers may be required for some models. With a reamed bore to ensure precise fit to spindle. Features: Silverbraze …

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. The quality and speed of cut is dependent on the pitch and the material being cut. Lubricant or grease may be required to reduce friction and dissipate heat when cutting some materials. To be used with reciprocating and sabre saws.

91VXL Oregon Low Profile chainsaw chains are ideal for professional woodcutters using smaller saws for high productionVXL chain 33% Longer Tooth than Standard VXOregon 91VXL chainsaw chains feature X Grind geometry for greater out the box sharpness, while the low vibration chamfer chisel cutters offer excellent cutting speedOregon 91VXL chainsaw chains are recommended for use with chainsaws up to 42cc running a bar up to 16" longFeatures:- Ramp-shaped depth gauges reduce kickback- Vibe-Ban chassis design reduces vibration 25% or more at the handles- Lubrilink tie straps help keep oil where it is needed-on the chain- Lubriwell oil holes in all drive links help carry oil around the full length …

The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines. This IRWIN Construction Circular Saw Blade has the following specification Blade Diameter 165mm. Bore 30mm. Teeth 18. Kerf Thickness 2.5mm. Tooth Config ATB.

Spare or replacement 10" / 250mm chain for GKC1825L20 Chainsaws.

Specifications: • 0.050" (1.3mm) gauge • Length: 400mm Fits: GK1940T GK2240TFeatures & Benefits• Semi Chisel Chain With Bumper Link - Low Profile 3/8" extended pitch • Stay sharp capabilities and durability • Bumper link to reduce kickback (57 links) • Meets the ANSI low kickback requirement • Easy to file and maintain using the Black and Decker sharpening kitContents1 x Replacement Chainsaw Chain

Irwin Sabre Saw Blades 110R 300mm Metal amp; Wood Cutting Pack of 5. Length: 300 mm.Teeth: 10 TPI.

The Dewalt DT1670 Circular Saw Blade, designed for use with the DCS365, lasts up to 2X longerThe Dewalt DT1670 ELITE Series Circular Saw Blade is designed for use with the DCS365 compound mitre saw. With a 184mm Diameter, 16mm Bore and 60 Teeth, the Blade is ideal for decorative wood cutting e.g. skirting boards, dado rails and architraves. It has anti-vibration slots and ultra-sharp teeth to deliver a superior cut finish. What sets DEWALT Elite Series accessories apart is their unmatched performance. The DEWALT ELITE SERIES is Built to Last, so you can forge ahead and finish the job no matter what. If you want to increase your productivity and reduce interruptions, these top-of-the-line accessories a…

For use with reciprocating saws with 1/2 inch universal shank systems. The S 1025 VF Heavy for Metal Reciprocating Saw Blade delivers effortless and smooth cuts in metal. Its thick gauge material (1.25 mm) provides stability for metal demolition. Moreover, its vario-tooth geometry is optimised for easy, comfortable and vibration-reduced cutting. This BIM (bi-metal) blade is designed for cutting regular-strength steel in demolition applications. Its vario-tooth pitch (1.8/2.6 mm) can be used on pipes and profiles with a wall thickness of 2 mm to 10 mm. It is equipped with a standard length of 200 mm, providing a cutting capacity of up to 150 mm.S 1025 VFBIM, vario-pitched teethMedium-thick to …

The Faithfull TCT Cordless Trimsaw Blade has Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance, and laser cut expansion slots to reduce heat build-up. The blade is specially designed for use with hand-held cordless saws, and this range includes blades for fast cutting, and fine finishing on all types of timber and man-made boards.

All Evolution multipurpose TCT saw blades are made in Japan and are of premium quality and performance. Designed specifically for FURY saw, this blade is an invaluable addition to any home workshop. Designed to cut mild steel, aluminium, plastics and wood, even wood containing embedded nails with a single FURY blade! Perfect for cutting hard & softwood, decking, laminate flooring, mild steel angle, unistrut and conduit, plywood, mdf, aluminium checker plate, plastic pipes and sheet, plus many other materials. FURY multipurpose Blades fit on Evolution FURY multipurpose saws only. Related Machines: FURY

Reciprocating saw blades for wood and metal.