Turntable Cartridges

The replacement stylus for VM670SP. 3 mil Conical stylus.
Suitable for Brand: Audio-Technica
Tracking Force: 4,5g - 5,5g
Shape: Conical
Tracking force recommended: 1,5 g
Type: Replacement Stylus
Colour: Grey
Application: Hi-Fi
Made in: Japan
Suitable for: VM670SP
Variant: VMN70SP
Material: Plastic

Dual moving magnet cartridge. This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Stylus tip radius: 3 mil
Voltage: 2,…

TechniHard adjustable headshell with AT6101 quad wire. With a mass of 18 g, the AT-LP18/OCC cell holder is used to adjust the cell advance and its azimuth. With its threaded end, it does not require the use of nuts when mounting the cell.
Made in: China
Colour: Silver

TechniHard adjustable headshell with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Colour: Silver
Made in: China

The Audio Technica AT-LH13/OCC Technihard 15g Headshell offers an adjustable overhang and azimuth proving reliable cartridge alignment and superb tracking. With its 13g weight the AT-LH13/OCC will help your cartridge capture every audio nuance. The included AT6101 quad wires enable polished signal transmission to produce a vivid vinyl sound. Designed for your convenience the AT-LH13/OCC features a finger lift so you effortlessly switch between songs while the internal headshell threads eliminate the need for nuts to simply cartridge fitting. Additionally the rigid TechniHard design ensures effective longevity for long-term use.

The 2M range of moving magnet cartridge have been an absolute revelation since their introduction. From the introductory 2M Red up to the flagship 2M Black and later with dedicated 78 RPM and Mono versions they have moved MM technology on to new levels.

Set includes AT-VM95E cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …

The Sumiko Oyster offers a level of refinement uncommon for a cartridge at this pricepoint and represents an excellent upgrade over the basic cartridge supplied with many turntables.

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.
Variant: E1 Phono
Application: Hi-Fi
Shape: Spherical
Made in: Japan
Tracking …

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean minimalist aesthetic the LH-4000 is great for a wide variety of cartridges specially recommended for the MC Quintet series.

MM phono cartridge for turntables. The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansive imaging. It is a no-nonsense performer with fascinating musical resources. Attached to a strong cantilever, used in DJ cartridges, this cartridge will not just sound great, it is also very strong.
The cartridge is made from a unique combination of technologies. Among others Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which compares with MC cartridges. The superior treble output provides …

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance. Instead of using a single large magnet the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently the VM design ensures outstanding channel separation extended frequency response and superb tracking.

The Ortofon Stylus 510 Replacement Stylus for 500 Series Cartridges is an updated and modern stylus replacement for the discontinued Ortofon 500 a classic moving magnet cartridge that was popular in the late 20th century. So that people can still enjoy these fantastic cartridges Ortofon are reproducing MKII versions of the styli used on the famed 500 series so that you can enjoy your vintage Ortofon cartridges for years to come. The replacement stylus offers a frequency response of 20-20000 Hz at + 2 / - 3 dB ensuring crisp clear audio across a wide spectrum. Its tracking ability at 315Hz at the recommended tracking force of 70 µm coupled with dynamic lateral compliance of 25 µm/mN ensures sm…

Cartridge System

Cartridge System / Output Voltage 11 mV

The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even includes cartridges with threaded mounting holes from series such as AT-OC9X AT-ART9X and VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity and audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records.…

The AT-LH13H is a 13-gram universal ½"-mount headshell optimized to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. The cartridge is also available in 15-gram (AT-LH15H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

The AT-LH15H is a 15-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium headshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. The cartridge is also available in 13-gram (AT-LH13H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

The AT-LH18H is a 18-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium headshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. 

The Pick-IT S2 C makes use of Ortofons iconic Concorde cartridge body. Now widely recognised as a DJ cartridge the Concorde actually began life nearly 40 years ago as a hi-fi cartridge and displays optimal characteristics for an engaging sound delivery. The added benefit of the Concorde design is that you dont need a headshell or any complicated alignment process – you just plug it in and adjust the tracking weight to get spinning.

The Ortofon 2MR Red Cartridge has been designed for tonearms with a low ride height featuring a cartridge body that is three millimetres shorter than the standard 2M model. The "R" quite simply means "Reduced" suited to certain tonearms from turntable manufacturers like Pro-Ject Rega and Linn where the correct vertical tracking angle (VTA) is not adjustable or compatible with larger mounting heights.The 2MR is otherwise unchanged and uses the same high-performance technology as the standard 2M Red. It even features the same stylus which makes it easy to swap out or upgrade to the 2M Blue Stylus if you choose. With its tipped elliptical diamond stylus profile this cartridge balances greater tracking …

Elliptical Nude replacement stylus from VM95 series.
Suitable for: VM95NEN
Type: Replacement Stylus
Material: Plastic
Colour: Orange
Suitable for Brand: Audio-Technica
Shape: Elliptical
Application: Hi-Fi
Made in: China

The MIX is a general-purpose model for scratch and back-cueing. Provides great performance and durability.
Type: Moving Magnet;Concorde;Cartridge
Variant: Mix
Shape: Spherical
Tracking force recommended: 3g
Recommended load resistance: 47 kOhm
Voltage: 6 mV
Colour: Black
Tracking Force: 2g - 4g
Made in: Japan
Channel balance at 1 kHz: 1,5
Weight: 18,5 g
Channel separation at 1 kHz: 20
Frequency Range: 20 Hz - 20 kHz
Impedance (Ohm): 700.0
Tracking ability at 315 Hz: 100 μm
Recommended load capacitance: 200-600 pF