Battery Chargers

Features: 1¡¢This product is suitable for Makita 10.8V lithium battery, easy to use. 2¡¢Well-made charger, sturdy and durable, ensuring a long-term use. 3¡¢Built-in USB output, more functions than the original adapter. 4¡¢High efficiency and reliability, strong performance, very stable. 5¡¢Built-in USB and DC ports, easy to charge 10.8v mobile devices. Input Voltage: DC 10.8V-12V (Max) Output Voltage: USB 9V 1.6A (Max) DC 9V 1.6A (Max) Instructions: 1. Install the adapter on the battery, press the switch once, and there will be USB voltage output. 2. When not using the adapter, remove the tool battery. 3. Built-in short circuit protection for using your mobile device safely. Package included:1…

Suitable for AIR 2S drone lens hood.Can effectively prevent parasitic light from entering the lens and avoid reflection.Quick installation and removal, Stable without loosening.Light weight without adding weight to the drone.size:7.2x8x5cm Material:ABScolour:BlackPackage Contents:1 x Lens HoodOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: 1목Charge two batteries simultaneously. 2목With LCD dispaly sreen to show each battery charging status. 3목USB interface can be charged by laptop, as well as a power bank, which is convenient for outdoor photography. 4목Safety circuit design, with overcharge protection, overdischarge protection and shortage protection fuctions. 5목It's small, mini and portable. Condition: 100% Brand New Item Type: Camera Battery Charger Material: Plastic Color: Black Weight: Approx.105.0g Type: Dual Charger Charging Display: LCD display Applicable Battery: For LP-E6 camera battery Input: 5V 2A 10W Output: 8.4V 0.6A 5W Package Included: 1 x Camera Battery Charger 1 x USB Cable 1 x Manual…

Features: 1목LCD display charging indicator, when the charger starts, socket ch1 / ch2 battery, screen ch1-ch2 lights on. 2목Mini USB dual slot charger, can be charged two batteries at the same time. 3목With safety circuit design, overcharge protection, overdischarge protection, shortage protection, safe to use. 4목Can use USB power source, including your computer, to drive dual chargers. 5목Safe and reliable for use in travel and outdoor activities 6목Suitable for Nikon V1 D500 D600 D610 D750 D800 D7000 camera battery. Condition: 100% Brand New Item Type: Camera Battery Charger Material: plastic Color: black Weight: Approx. 65g Fitment: for Nikon V1 D500 D600 D610 D750 D800 D7000 camera battery. App…

Features: 1¡¢High Quality Material: The programming line is made of high quality PVC materials, sturdy and durable, and can be used for a long time. 2¡¢Good Performance: The signal transmission speed of the programming line is very efficient and stable, and the performance is good. 3¡¢Easy to Use: The write frequency cable can be directly connected to the USB port of a PC or laptop, and it is easy to use. 4¡¢Input Interface: The output interface of the frequency writing line uses a TK contact plug, which is convenient to use. 5¡¢Scope of Application: Mainly suitable for Kenwood NX?200 NX?210 NX?300 TK2180 TK3180 and other USB programming cables. Package included: 1 x USB Programming Cable

Features: 1﹜Using 0.3mm optical glass, light transmittance above 90%, dustproof﹜sweatproof﹜anti?aging, protect your camera from scratches. 2﹜Surface through reinforcement and fine polishing treatment, hardness achieve around 8H, wear and scratch resistant. 3﹜Protection screen adopts automatic adsorption connection, with adhesive force of 130g/cm2, will not fall off when used at normal temperature. 4﹜Fine workmanship, can bear 12kg/cm2 impact force, anti?collision. 5﹜Professional manufacturing, suitable for Fuji X& 8209;T4/Fuji X100V camera. Condition: 100% Brand New Item Type: Camera Protection Film Material: Optical Glass Color: As Pictures Shown Technology: Black Edge Beautify Technology Har…

Model: Type-c to ENEL15 Type: Type-c interface Applicable models: for Applicable type: single battery / -single Charger input: USB-C QC/PD 9V 2A Charger output: 8.4V 2A Material: ABS colour: black Package Contents: 1 x Dummy Battery Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

High-quality Materials: The carrying case is made of high-quality PU material, which is wear-resistant and practical. While maintaining a simple and exquisite appearance, it dedicated to improving the user experience. The shell of multi-layer composite material is more protective.Zipper Designed: This carrying case uses a smooth double zipper design, which looks beautiful and fashionable. The smooth zipper can not only be easily stored, but the strict sewing technology can be shockproof and have good protection.Multi-purpose: This carrying bag is equipped with an adjustable shoulder strap, the length can be adjusted according to individual demands. And it has many ways to use, such as single-shoulder,…

1. Use soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced gluten noodle design can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use5. Easy to disassemble and install.Applicable models: for Avata FPV Combo Remote Controllercolor:RedMaterial:Silica gelPackage Contents:1 x Remote controller silicone caseOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from …

The upper frame of the Avata is detachable and can be replaced by the user.Compatible Drone Model: For AvataMaterial: plasticcolour: greyPackage Contents:1 x for Avata upper frame6 x M1.6x5 screw2 x M2x4.3 screwOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: 1목Action Process: The fence host boosts the 12V voltage to a high strength pulse voltage of 10KV through the pulse boost module, and connects and transmits it to the wire mesh. When the animal approaches and contacts the conductive wire of the fence, the high voltage pulse will give the animal a strong pulse, high voltage electric shock, thus giving a severe warning to touching animals. 2목Safety: Although there will be a high voltage electric shock, the pulse duration is very short, less than 0.1 seconds, so it will only give a severe warning to the animal in contact, and will not harm the animal. After being warned a few times, the animal will form a conditioned response, and will…

1. Suitable for AIR 2S/AIR 2 drones,2. It can be delivered remotely for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc,3. Lightweight and safe, it will neither increase the burden of the drone nor damage the drone, and is easy to install and disassemble,4. Install the landing gear at the bottom without affecting the propeller and sensor,5. The height of the front landing gear is increased by 31mm, and the height of the rear landing gear is increased by 28mm, which can prevent the ground debris from contaminating the fuselage or damaging the gimbal when taking off and landing the aircraft, and it can still take off and land on uneven ground.Maximum …

This is a 5V fixed-voltage MyVolts-branded power supply adaptor designed to meet exactly the power specification of your Sanyo VPC-CG20EX Digital camera. Specifications: - Output voltage is 5V - Max. output amperage is correct for your device - Output tip is the right size and specification - we& 39;ve tested it thoroughly - 2-pin plug for use with the Type C (EU) wall sockets - Input voltage is AC100-240V, 50/60Hz In addition, this myVolts-branded replacement power supply for Sanyo VPC-CG20EX Digital camera is: - Compliant with all safety standards, and features overvoltage, overcurrent and short-circuit protection to protect your device from damage - RoHS and CE-certified - Energy Star level …

This is a 5V fixed-voltage MyVolts-branded power supply adaptor designed to meet exactly the power specification of your Sanyo VPC-CG20EX Digital camera. Specifications: - Output voltage is 5V - Max. output amperage is correct for your device - Output tip is the right size and specification - we& 39;ve tested it thoroughly - 2-pin plug for use with the Type C (EU) wall sockets - Input voltage is AC100-240V, 50/60Hz In addition, this myVolts-branded replacement power supply for Sanyo VPC-CG20EX Digital camera is: - Compliant with all safety standards, and features overvoltage, overcurrent and short-circuit protection to protect your device from damage - RoHS and CE-certified - Energy Star level …

Features:Brand new and high qualityKeep for Canon camera powered up with ease using for Canon LC-E17 Battery Pack charger - Compatible with LP-E17 Li-ion batteries.Made of high-quality ABS material, this charger is durable and ensures a safe and reliable charge for your camera battery. Designed for photography enthusiasts, professional photographers, for Canon EOS 750D/800D/M3/M5 camera.Whether you're on a photo shoot or traveling, for Canon LC-E17 Battery Pack charger is compact and lightweight, making it easy to carry with you wherever you go. Say goodbye to low battery anxiety with for Canon LC-E17 Battery Pack charger - Charge your camera battery quickly and efficiently so you can focus …

Features:Brand new and high qualityKeep for Canon camera powered up with ease using for Canon LC-E17 Battery Pack charger - Compatible with LP-E17 Li-ion batteries.Made of high-quality ABS material, this charger is durable and ensures a safe and reliable charge for your camera battery. Designed for photography enthusiasts, professional photographers, for Canon EOS 750D/800D/M3/M5 camera.Whether you're on a photo shoot or traveling, for Canon LC-E17 Battery Pack charger is compact and lightweight, making it easy to carry with you wherever you go. Say goodbye to low battery anxiety with for Canon LC-E17 Battery Pack charger - Charge your camera battery quickly and efficiently so you can focus …

Features:Brand new and high qualityKeep for Canon camera powered up with ease using for Canon LC-E17 Battery Pack charger - Compatible with LP-E17 Li-ion batteries.Made of high-quality ABS material, this charger is durable and ensures a safe and reliable charge for your camera battery. Designed for photography enthusiasts, professional photographers, for Canon EOS 750D/800D/M3/M5 camera.Whether you're on a photo shoot or traveling, for Canon LC-E17 Battery Pack charger is compact and lightweight, making it easy to carry with you wherever you go. Say goodbye to low battery anxiety with for Canon LC-E17 Battery Pack charger - Charge your camera battery quickly and efficiently so you can focus …

Features: brand new and high quality for Alpha A6600 A7C A7III A7S III A7RIII A7R IV A9 series camera. Practical dummy battery coupler for NP-FZ100 battery, useful power supply adapter for camera. With Type-C plug to power your camera with power bank easily. Great stability and current transmission speed for camera charging. Small size, easy to carry out. Specifications: Material:Plastic Input: PD 9V/12V Cable Length:Approx.178cm/70.08in Net Weight:76g Note: Please allow 1mm errors due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package includes: 1x Dummy Battery

Replacement Hovertrax 2.0 Charger Port with Cover

CH-8 USB Charger for Nexgen 1300 BL-1 Li-ion BatteryBrand:X-ADVENTURER.Model:CH-8 Li-ion Battery Charger.Input:5V / 1A.Output:4.2V / 1A.Compatible:BL-1 Li-ion Battery (Nexgen 1300FSL, Nexgen 1300WRL, Nexgen 1300WUL).

Zebra WT6000 ONE SLOT CHRG/USB CRADL battery charger

Replacement Battery Charger for the WT15B Lithium-Ion battery charger for the WT15B. A fully charged battery will give a continous running time of 45-60 minutes. Specifications Make: Husqvarna Model No.: 589326104 Mains: 230V Battery: 21.0V Standard Delivery: 2 – 3 days

Original Weefine charger compatible with Smart Focus 4000, 6000 bulbs and also with Solar Flare 2800/3800 and 5000 bulbs from the Weefine brand.Characteristics:- Input: 100V to 240VAC 50/60 Hz 2.0A Max- Output: 16.8V to 2.8A- Weight: 260gr

Weefine charger model DSS36 compatible with Weefine Smart Focus 2300 and Smart Focus 3000 bulbs.Features:- Input:100V to 240VAC 50/60 Hz 1.5A Max.- Output:12.6V to 2.8A.