Profile cutters

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic lamina more→tes and veneers. 12.7mm diameter X 25.4mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow patterns and templates for replicating components. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working …

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic lamina more→tes and veneers. 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates for shallow rebating. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.…

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 77.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 58.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→8 mm • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 65 • Bearing Dia Metric: 19 • Bearing Dia Imperial: 3/4 • Angle: 90

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and v more→eneers. Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing. 1/2in shank for heavy duty use on curved and straight edge work ideal for replicating components and shallow rebating with templates. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: …

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 65.5

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth bearing guided trimmer for flush trimming of lamin more→ate and veneer work. Double shank mounted bearings for increased surface contact for additional stability and control. Useful all rounder for trimming and for templating work to form rebates and to replicate thinner workpieces. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length …

For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive more→black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Specifications • Shank Diameter: 8 mm • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 71.5

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Has a shorter cutter length for use on thin boards. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 4 • Overall Length Metric: 60 • Bearing Dia Metric: 12.7

Trend Trade Guided Profiler - 12.7mm diameter 12.7mm diameter X 25.4mm cutting length bearing guided profiling cutter for templating and trimming applications. Shank mounted bearing for top mounted more→templates. Allows excellent vision of the template when used for hand held applications for easy control. High quality micro-granular tungsten carbide cutting edges for maximum performance and durability on laminate, chipboard, ply, MDF and solid timber. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. PTFE coating on the bodies minimises heat and resin build up for increased performance and longevity." Supplied in a storage tube for maximum …

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Has a shorter cutter length for use on thin boards. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 6.35 • Overall Length Metric: 60 • Bearing Dia Metric: 12.7

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 71 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Angle: 90

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 12.7mm cutting depth bearing guided profiling cutter, perfect for temp more→lating and trimming work in timber, laminate and wood based materials. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. Ideal for forming curved rebates and grooves with templates for increased diversity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • …

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 9.5mm cutting depth bearing guided profiling cutter, perfect for templ more→ating and trimming work in timber, laminate and wood based materials. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. Ideal for trimming veneers and laminates and also for forming curved rebates and grooves with templates for increased diversity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: …

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces. Has a more→miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 12 • Overall Length Metric: 51 • Bearing Dia Metric: 4.8 • Angle: 90

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25.4mm cutting depth bearing guided profiling cutter, perfect for temp more→lating and trimming work in timber, laminate and wood based materials. Ideal for trimming veneers and laminates and also for forming curved rebates and grooves with templates for increased diversity. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: …

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 32mm cutting depth bearing guided profiling cutter, perfect for templa more→ting and trimming work in timber, laminate and wood based materials. Deeper cutting profile for replicating thicker components with templates. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length …

For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. D: 33.5 mm C: 9 mm B: 9.5 mm R: 9 mm OL: 53 mm Shank Diameter: 1/4 in more→ch Shank Diameter: 1/4 Dia Metric: 33.5 Cut Length Metric: 9 Overall Length Metric: 53 Bearing Dia Metric: 9.5 Type or Grade: Profile Radius 1 Metric: 9

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 90 • Bearing Dia Metric: 12.7

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specificat more→ions • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 53 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and v more→eneers. Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing. 1/2in shank, 50mm cutting depth for bigger routers. Perfect for replicating deeper workpieces including heavier joinery and furniture making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • …