Taps & Dies

Die nut M5 x 0.8 from Laser Tap & Die Set 4554 | Connect 37028Small metric die nut.To be used with 37023.Made from alloy steel.From Laser Tap & Die Set 4554.Supplied in a plastic case.

Die holder 25mm to suit dies M2 to M9 from 4554 | Connect 37023Metric die nut holder.For die nut sizes M2 to M9All taps & dies available separately.From Laser Tap & Die Set 4554.Supplied in a poly bag.

Adjustable Tap holder M6 to M20 from 4554 | Connect 37022Metric adjustable tap holder.M6-M20.All taps & dies available separately.From Laser Tap & Die Set 4554.Supplied in a poly bag.

Adjustable Tap holder M3 to M12 from 4554 | Connect 37021Metric adjustable tap holder.M3-M12.All taps & dies available separately.From Laser Tap & Die Set 4554.Supplied in a poly bag.

Thread tap chuck type socket with 3/8" drive.Adjustable to fit M4 to M14 thread taps (and equivalent imperial sizes).Also ideal for reamers and screw extractors with square shanks from 5mm up to 8mm a more→cross the flats.Stepped check collets design allows a wider range of square shanks to be covered.

For use with 3/8"D & 1/4"D ratchets, ideal for restricted access where a T handle tap holder will not reach. For driving rethreading taps from M1.5 to M14 depending on shank square size. Sockets have more→special square profile to fit the tap shanks. 6 x 1/4" drive magnetic sockets: socket number to square size: # 1 (2.8mm), # 2 (3.4mm), #3 (4mm), #3.5 (4.5mm), #4 (4.6mm), #4.5 (5.4mm); length: 32mm. 4 x 3/8" drive magnetic sockets: socket number to square size: #5 (6.4mm), #6 (7.3mm), #7 (7mm), #8 (8.4mm); length: 40mm.

Contents include: 17 Metric Taps, 17 Metric Dies, Tap Wrench, T-Type Tap Wrench, Die Wrench, Screw Pitch Gauge & Screwdriver.Tap and Die Sizes: 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9, 6 more→x 1.0, 7 x 1.0, 8 x 1.25, 9 x 1.0, 9 x 1.25, 10 x 1.25, 10 x 1.5, 11 x 1.5, 12 x 1.5, 12 x 1.75, 1/8 28BSP.M3 - M12 Tap Wrench and M3 - M6 T-Type Tap Wrench.25mm diameter Die Wrench.Screw pitch gauge and screwdriver.

Tap capacity M3-M10 (1/8"-3/8") Knurled adjustment. Length 300mm. 24 teeth Ratchet, forward and reverse. 3/8"D or 17mm wrench /socket or sliding T handle. Matt finish.

Part of the Laser Tools Tap and Die range supplied in blow mould case.A comprehensive accessory set for M3-M12 tapsRatchet wrench with innovative switching functionTap holder M3-M6 and M6-M12Die stock more→and 2 screw pitch gauges (SAE and Metric)Can be used with most taps and dies within its size range

Tap socket set in 3/8"D and 1/4"DMagneticSpecial square sockets for tapsManufactured from Chrome Vanadium4 x 1/4"D sockets: 1mm | 2mm | 3mm | 4mm; 4 x 3/8"D sockets: 5mm | 6mm | 7mm | 8mm. Supplied on more→a socket railIdeal for restricted access situations where you can't use a T-handle tap holder

Ratchet tap wrench 6-12mm length 110mmRatchet tap wrenchSize range 6-12mmLength 110mmPlated finishHardened jaws (spares available)

Ratchet tap wrench 3-6mm length 90mmRatchet tap wrenchSize range 3-6mmLength 90mmPlated finishHardened jaws (spares available)

Manufactured from alloy steel this set features split die, a comprehensive array of taps, three tap holders and two die holders. Popular sizes of taps are supplied in twos. Tap sizes: 4x0.7, 5x0.8, 7x more→1/0.75, 8x1.25/1/0.75, 9x0.75/1/1.25, 10x0.75/ 1/1.25/1.5, 11x0.75/1/1.25/1.5, 12x 0.75/1/1.25/1.5/1.75, 14 x1, 16x1/1.5/2, 18x1.5, 14 x 2/1.5/1.25 Die Sizes: M2x0.4. M3x0.5, M4x0.7, M6x0.75,M6x1, M7x0.75, M7x1, M8x0.75,M8x1, M8x1.25, M9x0.75, M9x1, M9x1.25, M10x0.75,M10x1, M10x1.5, M10x1.75, M11x0.75, M11x1, M11X1.25, M11x1.5, M12X0.75, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1, M14x1.25, M14x1.5, M14x2, M16x1, M16x1.5, M16x2, M18x1.5 2 x Adjustable Tap Holders M6-M20 (1/4"-3/4"), M3- M12 (1/16" …

Manufactured from Alloy Steel with Titanium coated finish for extra cutting edge. This neat set comes with 6 metric taps and dies plus T-bar tap wrench for extra leverage. Supplied in a handy pop up d more→isplay case for easy selection. Sizes: 3 x 0.5NC, 4 x 0.7NC, 5 x 0.8NC, 6 x 1.0NC, 8 x 1.25NC, 10 x 1.5NC.Metric.Manufactured from Alloy Steel and Titanium coated.This neat set comes with 6 metric taps and dies plus T-bar.Metric sizes: 3 x 0.5NC, 4 x 0.7NC, 5 x 0.8NC, 6 x 1.0NC, 8 x 1.25NC, 10 x 1.5NC.Comes in a handy pop up display case for easy selection.

Manufactured from alloy steel and with split dies, this set is aimed at the professional user. Automatic centre punch, sliding T-bar tap wrench for extra leverage, screw extractors, die holder, adjust more→able tap area plus M6 to M24 tap and dies: M6 x 0.75/1.Split dies.Automatic centre punch, screw extractor and 3mm flat screwdriver.Sliding T-bar tap wrench.Includes M6 - M24 tap and dies.Manufactured from alloy steel.

Genuine Laser Tools 3035 5/8" Spare Die for 2943

Genuine Laser Tools 3034 1/2" Spare Die

Genuine Laser Tools 3033 7/16" Spare Die

Genuine Laser Tools 3032 3/8" Spare Die

Genuine Laser Tools 3031 5/16" Spare Die

Genuine Laser Tools 3030 1/4" Spare Die

Genuine Laser Tools 3029 3/16" Spare Die

A standard tap and die set with all the accessories required. 40 pieces in Carbon Steel.17 tap and die sized in various thread gauges.Die wrench (25mm), tap wrench (3-12mm).T-handle wrench and 3mm fla more→t screwdriver.Folding pitch gauge and centre punch.Wire brush.

Manufactured from Carbon Steel. Tap and die sizes include: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 and M12 x 1.75. Adjustable tap wrench presented in blow mould case for easy sele more→ction.16 pieceManufactured from Carbon SteelTap and die sizes include: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75Adjustable tap wrenchDie wrench