High Pressure Hoses

Vale Imperial Nylon Tube Ring Vale imperial nylon tube ring with Industrial Ancillaries. This spare imperial brass compression nylon tube ring is available in sizes 3/16 OD to 1/2 OD. Note: Image is for illustrative purposes only and may differ from the actual product Note: Image is for illustrative purposes only and may differ from the actual product

Vale Metric Nylon Tube Ring Vale Metric Nylon Tube Ring. Brass compression fittings from Industrial Ancillaries Note: Image is for illustrative purposes only and may differ from the actual product Note: Image is for illustrative purposes only and may differ from the actual product

Vale Imperial Nylon Tube Ring Vale imperial nylon tube ring with Industrial Ancillaries. This spare imperial brass compression nylon tube ring is available in sizes 3/16 OD to 1/2 OD. Note: Image is for illustrative purposes only and may differ from the actual product Note: Image is for illustrative purposes only and may differ from the actual product

TM-12 MULTI-TUBE HOLDER by Zoro Select

Connecting fittings for robot spindles.

QP45-120 TRANSPARENT PLASTIC TUBE by Kennedy

Connecting fittings for robot spindles.

NLF08M 8x6.0mm FLEX NYLON TUBE RED by Copely

Connecting fittings for robot spindles.

A short hose which distances an air tool from its air supply to prevent vibration. Reducing vibration caused by a compressed air supply is recommended by Health & Safety guidance regulations.

The vibrations caused in the use of air tools make a coupling connection subjct to Health & Safety Regulations. The international Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and quick release coupling. Burst pressure: 63 bar Working pressure @20C: 300 lbf/in2 (21 bar) Comprises of adaptor and male thread fitting

The vibrations caused in the use of air tools make a coupling connection subjct to Health & Safety Regulations. The international Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and quick release coupling. Burst pressure: 63 bar Working pressure @20C: 300 lbf/in2 (21 bar) Comprises of adaptor and male thread fitting

Connecting fittings for robot spindles.

Fitted with solid brass couplings with a 360 swivel and spring protectors, this product can be used in any direction. Ideal for use in awkward access areas, these products have the ability to recoil to a smaller size than its working length when not in use leaving the work place clear of entanglement hazards. Supplied in an attractive and vivid yellow colour and constructed of durable nylon. Features and Benefits Has a recoiling action that retracts the product to a fraction of its length when not in use to ensure your work area is tidy Couplings with 360 swivel and spring protectors allow the product to be used at all angles Available in two sizes to find the product that best suits your needs …

The vibrations caused in the use of air tools make a coupling connection subjct to Health & Safety Regulations. The international Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and quick release coupling. Burst pressure: 63 bar Working pressure @20C: 300 lbf/in2 (21 bar) Comprises of adaptor and male thread fitting

The vibrations caused in the use of air tools make a coupling connection subjct to Health & Safety Regulations. The international Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and quick release coupling. Burst pressure: 63 bar Working pressure @20C: 300 lbf/in2 (21 bar) Comprises of adaptor and male thread fitting

The vibrations caused in the use of air tools make a coupling connection subjct to Health & Safety Regulations. The international Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and quick release coupling. Burst pressure: 63 bar Working pressure @20C: 300 lbf/in2 (21 bar) Comprises of adaptor and male thread fitting

Air Tool Whip Hoses which distances an air tool from its air supply to prevent vibration is highly recommended by Health and Safety. The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. Features and Benefits Helps to prolong the life of couplings and adaptors Increases comfort of use Enables you to use the tools safely. Simply "Plug-in and go" Notes 0.6mtr Anti Whip Hose, fitted with Standard Adaptor at one end & 1/4 NPT Male Thread at the other.

Professional recoil air hose, 25 ft (7.62M) length.

Fitted with solid brass couplings with a 360 swivel and spring protectors, this product can be used in any direction. Ideal for use in awkward access areas, these products have the ability to recoil to a smaller size than its working length when not in use leaving the work place clear of entanglement hazards. Supplied in an attractive and vivid yellow colour and constructed of durable nylon. Features and Benefits Has a recoiling action that retracts the product to a fraction of its length when not in use to ensure your work area is tidy Couplings with 360 swivel and spring protectors allow the product to be used at all angles Available in two sizes to find the product that best suits your needs …

Vale Metric Hydraulic Tube 3M Length Vale Metric Hydraulic Tube 3m Length with Industrial Ancillaries. Our 3m metric hydraulic tube is manufactured to DIN 2391 part C Note: Image is for illustrative purposes only and may differ from the actual product Note: Image is for illustrative purposes only and may differ from the actual product

Vale Clear Pvc Tube 30M Coil Vale clear PVC tube 30m with Industrial Ancillaries. This 30m coil of clear PVC tubing is non-toxic suitable for food uses including liquids and gasses. Note: Image is for illustrative purposes only and may differ from the actual product Note: Image is for illustrative purposes only and may differ from the actual product

Whip Hose 750mm Fitted With 1/4BSP Male & Female Thread For use in the workshop with all air tools Air tools create a vibration when in use and this vibration will cause damage to the quick release coupling fitted on the air hose Connect this whip hose between the tool and the air hose to reduce the vibration and thus reducing the damage to the coupling Length 750mm Working pressure 20 BAR (300PSI)