Demolition Hammers

The Makita HM002G XGT 80Vmax Demolition Hammer has a brushless maintenance-free and long-life motor. Soft start suppresses start-up reaction for more control and better accuracy. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Its one touch sliding chuck allows for easy bit changes. 12 bit angle settings allow the bit to be set at different positions for operating convenience. Fitted with a vibration absorbing handle for more comfortable operation. Twin LED lights with pre-glow and afterglow functions allow for better illumination and more accurate work. XPT (Extreme Protection Technology)

Zipper heavy duty demolition breaker hammer providing 65 Joule of high impact energy for heavy rugged construction work in masonry and concrete. upplied with powerful 1700 W motor, 30 mm hex retainer, 2 x chisels (1x pointed, 1 x flat chisel), and steel carry case included.

Best power-to-weight ratio thanks to 1700 watt motor and 23 joules of impact energy with a weight of only 11.4 kg (in accordance with EPTA) Low vibration of only 8 m/s² due to decoupled main and side handles and optimised hammer mechanism that minimises vibration where it originates Typical in-line design ensures optimum handling when working towards the ground Long lifetime due to robust metal components Items included: GSH 11 VC, pointed chisel, case

Upgraded 8.0 amp motor – delivers 2.0 ft.-Lbs. Of impact energy Three modes of operation – drilling only, hammer drilling and chiseling Rotating brush plate – provides equal power in reverse and extends brush life Variable-speed reversing trigger – for accurate bit starting Power performance – provides a no-load RPM at 0-1,300 and no-load BPM at 0-5,100

The Makita HM0810T A/F Hex Demolition Hammer has a compact, lightweight design and is fitted with a 17mm A/F Hex shank. It utilises AVT Anti-Vibration Technology the anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue. A one-touch tool retainer provides easy accessory installation and removal. Supplied with 1 x Bull Point, 2 x Hex Wrenches (4/5mm), 1 x Side Handle and 1 x Carry Case Specification Input Power 900W Impact Rate 2,900/bpm Impact Energy 8.5 joules Shank 17mm A/F Hex Weight 6.0kg All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Chiselling 14 m/sec. Vibration K Factor 1.5 m/sec.

The Orbis 38cm (15in) range offers a combination of ergonomics, safety and ease of use with the lowest possible initial and lifetime costs backed by a two year guarantee. High productivity, 1100 watt motor, high pad / brush pressure for effective cleaning. Ergonomic design for operator comfort and ease of use. Low vibration levels means greater user comfort on long cleaning shifts. Safety interlock and dead mans switch built into the handle for increased user safety. 230V / 50Hz AC Induction motor 1100w Pad Diameter 38cm Pad Pressure 28 g/cm2, Speed 380rpm Height 1210mm, Weight: 32kg 35cm Cable length 15m Noise 53dB(A), Drive Board or Scrub Board Sold Separately

The Makita HM0810T A/F Hex Demolition Hammer has a compact lightweight design and is fitted with a 17mm A/F Hex shank. It utilises AVT Anti-Vibration Technology; the anti-vibration spring is positioned between tool body and rear handle for reduced operator fatigue. A one-touch tool retainer provides easy accessory installation and removal. Supplied with: 1 x Bull Point 2 x Hex Wrenches (4/5mm) 1 x Side Handle and 1 x Carry Case. Specifications: Input Power: 900W.Impact Rate: 2 900/bpm.Impact Energy: 8.5 joules.Shank: 17mm A/F Hex.Weight: 6.0kg. All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Chiselling : 14 m/sec².Vibration K Factor : 1.5 m/sec².The

Milwaukee MXF DHT Demolition Hammer Trolley

Genuine, OEM Black & Decker Replacement Part Black & Decker replacement anvil, detent, part number N536344 Measures approximately 1.50 X 1.45 X 1.80 inches

DESCRIPTION20-30kg pavement breaker range suitable for heavy industrial construction work along with many demolition and civil engineering applications, from pavement / highways repair & reinstatement to trenching for utilities repair and installation.Vibration damping handles and an air cushion cylinder design reduces vibration across all tools. The air cushion protects the breaker by preventing the cylinder and piston from damage caused when the tool is used unloaded or without a chisel.Efficient muffler designs throughout the range keeps noise levels to a minimum, along with Tokus Polyolefin foam muffler that will prevent the main cylinder contracting under cold & damp conditions fully

Note: Image is for illustrative purposes only and may differ from the actual product

TOOL BODY ONLY: Accepts any 18V/36V MultiVolt battery or AC Adapter (sold separately) POWER: High impact energy of 2.3 ft-lbs & 950 RPM / 4,300 BPM for high drilling speeds and great demolition performance AUTO STOP: Set your time for repeive drilling ERGONOMIC: D-Handle makes drilling easier especially for overhead and downward drilling BIT MOUNTING: One-push bit mounting makes changing out bits quick and easy.ON-TOOL LED: Provides plenty of light in dark spaces.BRUSHLESS MOTOR TECHNOLOGY: For more run-time, increased power, extended durability with essentially no maintece.2-STEP SPEED CONTROL: For faster work.REACTIVE FORCE CONTROL: Senses the tool overload and stops rotation to ensure …

Metabo item number: 626622000

The Estwing Demolition Hammer is perfect for heavy-duty and industrial construction projects. Its forged chrome steel head with striking ends hardened to 50-55 HRC can withstand years of repeated impacts without deforming. This head is mounted to a 91cm (36in) long fibreglass handle double injected for increased strength and durability. A textured rubber overlay on the handle provides a comfortable ergonomic and secure grip in both grip positions while also helping to dampen vibrations. Below the striking head the handle and rubber overlay are thicker to provide increased overstrike protection to prevent damage from missed hits.The Estwing Demolition Hammer Fibreglass Handle 3.6kg (8

Additional part for use with 902450SP Heavy Duty 'Vibro-Impact' Air Hammer

Fast cutting action. Vibration isolation system. Touch trigger. Ideal for exhaust system work, bolt cutting, bushing driving, shearing and front end work. Specifications: Shank: 0.401". Bore: 19mm. Stroke: 67mm. Blows per min: 3200bpm. Weight: 1.70kg.

Dual air chambers provide for both dust collection during use and provide suction to the wall Dust port fits Bosch 1-3/8-Inch vacuum nozzle and can convert to 1-1/4-Inch / 2-Inch hose nozzles Rubber seal maintains suction to wall Optimized for drilling diameters from 5/8-Inch to 1-3/8-Inches, but can accommodate up to 2-1/2-Inchs if the brush ring is removed International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.