Bottom Brackets

Upgrade your bike's bottom bracket with the TRUVATIV BB30 PressFit bottom bracket cups in sleek black. These durable bottom bracket cups are designed for use with BB30 frames and cranksets, providing a smooth and efficient pedaling experience. The PressFit design eliminates the need for additional adapters or spacers, ensuring a secure fit for optimal performance. Enhance your ride with these high-quality bike parts from TRUVATIV.

FSA BB 30/68 EVO 386 Bottom Bracket Adapter BB30 / 68mm bottom bracket adapter to FSA 386EVO bottom bracket set.

Shimano BB-UN300 68mm Square Taper Bottom Bracket Shimano’s tried and trusted BB-UN300 68mm Bottom Bracket is perfect for traditional square taper chainsets, providing superb reliability and easy installation. The sealed bearings are smooth and durable whilst the narrow body leaves plenty of room within the frame for cable routing.

Quality and original spare part Shimano. Bottom bracket using sealed bearings. Alloy cups and body save weight. Check the diameters to avoid damaging the frame which is not threaded.

Bike parts - Bottom brackets.TRUVATIV BSA PowerSpline bottom bracket.Steel body chromoly spindle sealed cartridge bearings 68mm eng power spline 113mm alloy 327g.

Einsatzbereich:BMX.-Material Achse:wärmebehandeltes CrMo.-Achsbohrung:M12.-Lagerschalen:CNC gefrästes Aluminium.-Lager:4 gedichtete Industrielager.-Tretlagerschalenmaß:BSA 1.37´´.-Innenlagerbreite:68mm.-Kettenlinie:42,5mm.Features:Color:no.Version:englisch.BSA.Shell width:113x68 mm.Axle profile:Giga Pipe.Bearings:Steel.Chain Line:no.

Shimano BB-UN300 68mm Square Taper Bottom Bracket Shimano’s tried and trusted BB-UN300 68mm Bottom Bracket is perfect for traditional square taper chainsets, providing superb reliability and easy installation. The sealed bearings are smooth and durable whilst the narrow body leaves plenty of room within the frame for cable routing.

##Shimano MT800 Press Fit Bottom Bracket with Inner Cover

Bottom Bracket / MTB / BB30

Shimano BB-UN300 68mm Square Taper Bottom Bracket Shimano’s tried and trusted BB-UN300 68mm Bottom Bracket is perfect for traditional square taper chainsets, providing superb reliability and easy installation. The sealed bearings are smooth and durable whilst the narrow body leaves plenty of room within the frame for cable routing.

himano BB-UN300 British Thread Square Taper Bottom Bracket ina variety of sizes for traditional chainsetsFeatures:A good quality bottom bracket for traditional chainsetsSuper-accurate bearings for smooth operation and improved durabilityDurable, hard-wearing sealed cartridge bottom bracket with square tapered spindle fittingMaintenance-free sealed cartridge bearing assembly keeps out dirt, mud, and water for long bearing lifeFast and easy installation without adjustmentNarrow body allows clearance for cable routing under the bottom bracket

Square axle bottom bracket SHIMANO with quality cartridge bearings for performanceBetter chain stability with stabilizer3 types of mounting availableStandard, E-Type and chain case optionsAdapter material: aluminum

Square axle bottom bracket SHIMANO with quality cartridge bearings for performanceBetter chain stability with stabilizer3 types of mounting availableStandard, E-Type and chain case optionsAdapter material: aluminum

Rotor 30mm Bearing Kit For BB30 Frames - Steel Install your Rotor, or other 30mm cranks into any BB30 or BBright CA frame with this Rotor 30mm Bearing Kit For BB30 Frames - Steel for supreme spinning efficiency. These bearings, like all Rotor products, are built to last. The steel composition is incredibly durable for miles of riding. Also included are all of the required labyrinth secondary seals and retaining spring clips, so all you need to get going is some grease and a bearing press.

For 68mm wide BB30 frames. Ceramic bearings for minimum friction and maximum durability.Features:- Ceramic BB30 cartridge bearings- Wave Spring and circlips included- Nylon adjustment washers includedSpecifications: Weight: 53g (set)

Bottom Bracket / Shimano Ultegra / Racing Bike / Shimano Hollowtech II / 77 g / Connection Inlet Size BSA 1,37 x 24 (ENG) mm / Bearing Position Outside

BSC threadsilverA=107mmB=68mm

Bike parts - Bottom brackets.FSA BB86 Pressfit bottom bracket cups.Road bb86 steel composite cups bb-al86/ø19/cz for diameter 19mm spindles.

##SRAM BB30 Bearing Assembly The SRAM BB30 bearing assembly kit includes: * Two bearings * Black caps * Spacers * Washers

The new SRAM DUB™ bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB™ spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.Features:- One oversized spindle to work across every bottom bracket standard.- Significantly lighter than PFGXP system- Easier installation by allowing you to press the bearing cups into the frame- Easy instal…

Bike parts - Bottom brackets.FSA Press Fit 30 MegaExo 24 mm bottom bracket cups.Cartridge bottom bracket fsa table pf30 megaexo 24mm rods for.

Gutter Seal Technology drastically improves sealing against the elements while reducing seal drag. We've designed a fresh cup forging for a high-end look. Features:- Gutter Seal Technology- Improved tool engagement- Sealed cartridge bearingsTechnology:GXP®: GXP's Gutter Seal design cuts friction and weight—improving both feel and performance.

A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them. Theres no change to the crank spindle length and diameter remain the same.Specifications:- Weight: 83g Ceramic/94g Standard

Splined bottom bracket for use with Shimano octalink chainsetsoversize bb spindle - large 22 mm diameter hollow cold forged chrome-moly pipe billet spindle reduces weight, increases strength and rigidityoctalink splined axle/crank arm interface - results in more rigid crank assembly compared to square tapered spindlesealed cartridge assembly with oversize ball bearings - maintenance-free high efficiency rubber seals keep out dirt, mud and watercartridge design allows easy installation without adjustment