Car Subwoofers

Features 1. Box super-thin design: the effective saving of interior space, the appearance of the box with high-grade blanket fabric design, reduce resonance. 2. The use of high-quality MDF board to ensure pure sound quality. 3. The high power tube, has a short circuit reverse protection for the box. 4. The star protective cover: the use of ABS plastic, play a collision protection role. 5. Unique paper cone design, so that the bass is more robust, more stable performance. Specifications 1. RMS Power: 35W 2. Max Power: 350W 3. Frequency Response: 20 HZ– 20KHz 4. Signal/Noise Ratio: >91 dB/m.w 5. Impedance: 4Ω 6. 12/24/220（V） 7. 33.5*24*12CM 8. Distortion: 0.5% 9. Control-rangre: +16db

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass. Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily …

Spoked Subwoofer Grille designed for Kicker Comp,CompVT, CompVR, CompVX, and Solo Classic subwoofers series Simple installation Stylish black metallic finish Protects exposed Subwoofer from potential damage Dimensions: 10" (25cm)

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Boxed Subwoofer / Diameter 200 mm / 8 Inch / 250 watt / Impedance 1 x 4 Ohm

Boss Audio Systems BX-10 Subwoofer Ripper Series 350 RMS, 700 Watt max. Factory packaging

Diameter 250 mm / 10 Inch / 360 watt / Nominal Load 150 Watt / Impedance 4 Ohm

Cta-2031 specifications: 300w rms, 900w peak Alpine s-w8d2 s-series subwoofers Frequency response: 34hz-200hz Mounting depth: 3 3/4-inch

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

RBlaupunkt GTHS81 8” Amplified Subwoofer 320 WattsCA Low Level Input: 0.15V. High Level Input: 1V Variable Bass Boost: 0 to +12dB Phase Selector Switch: 0 to 180 Degrees Signal to Noise ratio: 91dB. Frequency Response: 20Hz-150Hz Dimensions: 13 x 9.45 x 2.87 Inches

This product is made of high quality material, non-toxicity, lightweight with high durability. You will love it. Features: Made of high quality material, non-toxicity, lightweight with high durability. Beautiful and luxury design, stylish and smooth touch. Easy to use and reusable. convenient to install.

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(…

10-Inch Cast Aluminum Subwoofer Grille Enhances the look of your 08 Series Kicker Solo-Baric subwoofers Protects the sub from damage This grill is sure to give your woofer an attractive look Compatible with: 11S10L74, 11S10L72, 08S10L74, 08S10L72, 08S10L54, and 08S10L52

Features: Alpine W12S4 12" 750 Watt Peak 250 Watt RMS 4-Ohm Car Audio Subwoofer 12" 4-ohm subwoofer. Polypropylene and mica cone with poly-foam surround. Stamped steel frame

Space-saving subwoofer solution Recommended power: 800 – 2500 watts. Voice coil 63 mm copper Long-stroke sandwich beading. Solid cast aluminium basket

Boss Audio CXX124DVC 12" 1200 Watt Car Stereo Subwoofer Dual-4 Ohm Sub. Chaos Exxtreme - 12 inch DUAL Voice Coil (4 Ohm) 1200-watt Subwoofer One 12" Woofer with DUAL 4 ohm 2.5" Voice Coil. 1200 Watts MAX 600 Watts RMS Power Handling. 85dB Sensitivity, 32 Hz Resonant Frequency Polypropylene Cone and Rubber Surround. Works in .9 - 1.4 CuFt Sealed or 1.44 - 2.16 CuFt Ported enclosures