Grinders & Polishers

Note: Image is for illustrative purposes only and may differ from the actual product

Basic belt grinder, 150 mm switchable|GRIT GI 150 2H

Note: Image is for illustrative purposes only and may differ from the actual product

The Holzmann KOS2740c oscillating belt sander is suitable for any small to medium sized joinery workshop or cabinet maker's workshop, it is very well guarded and easy to use. It can be used horizontally or vertically. In the vertical mode the work table can be raised by means of a hand wheel and adjusted to minimise the gap to the sanding belt. An additional use is as a small vertical drum sander with the fitment of any of the three bobbins (1 1/2", 2", 3") supplied. A robust, welded steel stand supports the whole machine and has a large cupboard for storing sanding sheets and accessories. A very well made and invaluable machine in any workshop.

For heavy industrial use. Totally enclosed balanced motor and shaft with dust-proof sealing to high quality bearings gives many years of quiet vibration free operation. Also available with EX16 built-in dust extraction, KU bag type dust extraction, pedestals, polishing wheels, guards and spindles, grinding belt arms, tables with coolant troughs, illuminated wheel guards. For full details please contact your local branch. Standard features: Emergency stop switch. Adjustable spark arresters. Heavy-duty eye shields. Adjustable tool rests. 5 year warranty on motor.

Ajax Arboga Belt Grinders are designed for continuous heavy-duty grinding.The machines are built to a high quality and strong design. The equipment is fitted with adjustable tool rest, eye shield and motor protection. These heavy-duty machines run at noise levels of below 80dBA. The design enables quick belt change and alignment, a flat guarded grinding area and a pivoting eye shield. For full details please contact your local branch. Standard features Emergency stop switch. Adjustable eye shield. Adjustable tool rest. No volt release. Large grinding area. Prepared for dust extraction. 5 year motor guarantee. No load speed: 28rpm (30m/sec). Contact wheel diameter: 200mm. Model designated X

Note: Image is for illustrative purposes only and may differ from the actual product

Fein 79021300403 M. Grinder GIMS75 3x400/440V 50/60Hz Product range: GRIT FEIN part number: 79021300403

Note: Image is for illustrative purposes only and may differ from the actual product

Trelawny Twin Head Floor Grinder (Petrol)

Note: Image is for illustrative purposes only and may differ from the actual product

Belt grinder (base unit), 75 mm, can be switched|GRIT GX 75 2H

Note: Image is for illustrative purposes only and may differ from the actual product

Arm Sander

For heavy industrial use. Totally enclosed balanced motor and shaft with dust-proof sealing to high quality bearings gives many years of quiet vibration free operation. Also available with EX16 built-in dust extraction, KU bag type dust extraction, pedestals, polishing wheels, guards and spindles, grinding belt arms, tables with coolant troughs, illuminated wheel guards. For full details please contact your local branch. Standard features: Emergency stop switch. Adjustable spark arresters. Heavy-duty eye shields. Adjustable tool rests. 5 year warranty on motor.

Note: Image is for illustrative purposes only and may differ from the actual product

400v 3 Phase 2,4kw motor 100mm Belt width 20 to 76mm Tube notching Double ended use with forward and revserse

FEIN 72280551241 belt file starter-set bf10-280e/N24 50H 110V Product range: sander/polishers FEIN part number: 72280551241

Drum speed 1,400rpmDrum dimensions 152635mmMaximum sanding width 635mmMinimum sanding length 230mm

The TCG250 is a heavy-duty single head grinder for levelling and preparation of small to medium areas. The flexible grinding head ensures maximum contact and usage of the diamond while working over rough surfaces. Robust design and optimised grinding pressure while maintaining overall compactness together with manoeuvrability make the TCG250 the choice for a wide range of jobs. It is the ideal partner for both specialist contractors and the hire industry. A flexible range of tooling options completes the perfect package providing a versatile solution to many grinding applications.APPLICATIONSSuitable for medium to large jobsLevelling and smoothing of concreteRemoval of coatings and

Note: Image is for illustrative purposes only and may differ from the actual product

SCH 10 DIN10/G28 2M

Note: Image is for illustrative purposes only and may differ from the actual product