Rotary Hammers

Tool Features: Ideal for drilling large anchor, fixing and through holes in concrete and masonry from 6 to 32 mm in diameter. Brushed motor providing an input power of 1000W for optimum performance, delivering a no load speed of 820 rpm and 4.2J impact energy. 3 mode selector: Hammer and rotary, rotary only, hammer only for various site applications, recessed for added durability. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power for enhanced safety. Active vibration control system (8.2m/s) incorporating a floating rear handle to reduce fatigue for increased safety, comfort and productivity. Over moulded gripping area for enhanced comfort. Quick …

Makita HR3540C 35mm SDS Max Rotary Hammer Drill with AVT, complete with side handle, depth stop, bit grease and carrying case The Makita HR3540C SDS Max hammer drill has been developed based on the HR3200C series. This model has the ability to drill up to 35mm in concrete and features AVT (Anti-Vibration Technology), which protects the operator from physical injury and the machine from mechanical and electrical overload. The 3 mode operation: Rotation only / Rotation with hammering & Hammering only allows for maximum versatility in a range of applications.Features: Electronic-power-control for greater comfort Anti-vibration system - Reduced vibration for less operator fatigue Torque-limiter

M18CHX-502 FUEL? SDS+ HAMMER 18 VOLT 2 X 5.0AH LI-ION

The HiKOKI DH18DBL Rotary Hammer has a highly efficient maintenance-free brushless motor offering a significantly extended run time. Its optimised hammering mechanism can achieve a 40% faster drilling speed with up to 4.6kg/5min. demolition performance. Ergonomic design for improved user handling. The grip of the handle is close to the centre of gravity and the Reactive Force Control (RFC) reduces the risk of injury from tool overload. Supplied with: 2 x 18V 5.0Ah Li-ion Batteries 1 x UC18YFSL Charger 1 x Side Handle 1 x Depth Stop and 1 x Carrying Case. Drill bit NOT included. Specifications: Modes: Rotary Drilling Hammer Drilling and Chiselling.No Load Speed: 0-1 050/min.Impact

Makita HR3541FC 35mm SDS Max Rotary Hammer Drill with AVT, complete with side handle, depth stop, bit grease and carrying case. Available in 110 or 240 volts. The Makita HR3541FC SDS Max hammer drill has been developed based on the HR3200C series. This model has the ability to drill up to 35mm in concrete and features AVT (Anti-Vibration Technology), which protects the operator from physical injury and the machine from mechanical and electrical overload. The 3 mode operation: Rotation only / Rotation with hammering & Hammering only allows for maximum versatility in a range of applications. Features: Electronic-power-control for greater comfort Reduced vibration for less operator fatigue

K540S COMBI - SDS-MAX RECEPTION 240V by Milwaukee

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel

K540S COMBI - SDS-MAX RECEPTION 110V by Milwaukee

30 Grit Double (Quick Release) Hard Bond Soft Concrete or very rough concrete

DESCRIPTION5kg Class light duty hammer19 x 50mm Hex shankUp to 2640 Blows per minuteFitted with solid steel screw retainer for use with pointed and wide cutting chiselsSuitable for demolition, foundry & rebar workIntegrated noise mufflerFitted with Claw couplings as standardOnly 360mm overall lengthLarge D-grip handle for greater operator comfort USE ME FOR5kg Class light duty hammer range suitable for demolition, foundry and rebar work. Up to 2640 blows per minute. 360mm overall length.