Rotary Hammers

SDS MAX DRILL BIT 12 X 540MM

SDS MAX DRILL BIT 12 X 340MM

The Olympia Tools® Hammer Drill with a powerful motor offers hammer and rotary drilling. For ease of use it has a variable speed pre-selection dial. It also offers forward and reverse rotation. Supplied with a side handle and depth gauge. Specifications: Chuck: 13mm (1/2in) Keyless.Input Power: 600W.No Load Speed: 0-3 000/min.Impact Rate: 0-50 400/bpm.Capacity: Masonry 13mm Steel 10mm Wood 20mm.Weight: 1.97kg.PTDOLPHD600

The Olympia Tools® SDS Plus Rotary Hammer is fitted with a powerful 800W motor and offers 3-functions: drilling hammer drilling and chiselling. A function lock provides additional safety. It has a variable speed for additional control and job customisation and also a forward-reverse function. Its easy-to-handle design incorporates a soft grip handle for reduced fatigue. Supplied with: 1 x Carrying Case 1 x Side Handle and 1 x Depth Gauge. Specifications: Input Power: 800W.No Load Speed: 0-1 000/min.Impact Rate: 0-5 000/bpm 2.5 joules.Max. Drilling Capacity: Concrete 24mm Steel 13mm Wood 40mm.Weight: 3.64kg.PTDOLPRH800

M18CHX-502 FUEL? SDS+ HAMMER 18 VOLT 2 X 5.0AH LI-ION

M18 4-MODE SDS-PLUS HAMMER KIT WITH FIXTEC CHUCK by Milwaukee

The DHR281ZWJ rotary hammer, including quick-change chuck and DX09 Dust Collection System, is powered by 2x18V LXT batteries that power the 3 operating functions: rotation only/rotation and hammer/hammer only. This unit comes equipped with an LED joblight and variable speed trigger, as well as an electric break to stop the tool near-instantly in order to keep you safer at work; a soft-no load system that eases any excessive forces when idling to allow you to properly control the unit when it's not in use, which saves stress and strain on your joints; plus a brushless motor, which reduces friction and increases the efficiency of energy transfer, meaning that your tool will be able to do more

EDH620 Incorporating the most advanced features available, it is designed for the professional who demands speed and reliability from a rotary hammer drill, allowing you to do more in less time. Two modes of operation, rotary only and hammer drilling. The lock-on speed button allows for continuous operation, reducing end-user fatigue. The soft ergonomic contoured pistol grip handle helps to absorb vibration and provides a comfortable and secure grip. No load speed: 1,050rpm. Impact rate: 4,400bpm. Impact energy: 2.2J. Capacities: concrete 3.4 - 22mm, steel 13mm, wood 32mm. Accessories: depth stop. Weight: 2.50kg.

K950S COMBI - SDS-MAX RECEPTION 240V by Milwaukee

K950S COMBI - SDS-MAX RECEPTION 110V by Milwaukee

K900K BREAKER - K STEEL RECEPTION 240V by Milwaukee

K750S COMBI - SDS-MAX RECEPTION 110V by Milwaukee

K540S COMBI - SDS-MAX RECEPTION 240V by Milwaukee

K540S COMBI - SDS-MAX RECEPTION 110V by Milwaukee

K500S BREAKER - SDS-MAX RECEPTION 240V by Milwaukee

K500S BREAKER - SDS-MAX RECEPTION 110V by Milwaukee

Makita HR4511C SDS Max Rotary Demolition Hammer Drill with AVT, complete with 2 side handles, depth stop, bit grease and carrying case This Demolition Hammer features Makita's Anti Vibration Technology which dramatically cuts down the amount of vibration being transferred to the operator resulting in much less user fatigue. This works with an internal balancer which is moved by the air pressure created inside the drill housing by the hammer action. The balancer moves in the oposite direction thus acting as a perfectly timed counterbalance. This technology coupled with the padded, spring loaded, hinged rubberised grip means the HR4511C is unleashing all it's power in a forward motion,

Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handle The Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer. Features: One touch sliding chuck for easy bit installation and removal Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage "Soft

The Makita HR4013C 40mm AVT SDS Max Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and an easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage. The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light that indicates when to replace carbon brush, preventing additional damage to the gearings. The vibration absorbing housing offers unrivalled low level of vibration.

The Makita HR4013C 40mm AVT SDS Max Rotary Hammer has been developed to provide higher operating efficiency and more comfort with an unrivalled low level of vibration. It has a one touch sliding chuck for easy bit installation and removal and an easy to operate operation-mode change lever. This is located on the top of the motor housing for reduced possibility of breakage.The soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body. There is a handy LED service light indicating when to replace carbon brush preventing additional damage to the gearings.The vibration absorbing housing offers unrivalled low level of vibration. In

Makita HR3541FC 35mm SDS Max Rotary Hammer Drill with AVT, complete with side handle, depth stop, bit grease and carrying case. Available in 110 or 240 volts. The Makita HR3541FC SDS Max hammer drill has been developed based on the HR3200C series. This model has the ability to drill up to 35mm in concrete and features AVT (Anti-Vibration Technology), which protects the operator from physical injury and the machine from mechanical and electrical overload. The 3 mode operation: Rotation only / Rotation with hammering & Hammering only allows for maximum versatility in a range of applications. Features: Electronic-power-control for greater comfort Reduced vibration for less operator fatigue

Makita HR3540C 35mm SDS Max Rotary Hammer Drill with AVT, complete with side handle, depth stop, bit grease and carrying case The Makita HR3540C SDS Max hammer drill has been developed based on the HR3200C series. This model has the ability to drill up to 35mm in concrete and features AVT (Anti-Vibration Technology), which protects the operator from physical injury and the machine from mechanical and electrical overload. The 3 mode operation: Rotation only / Rotation with hammering & Hammering only allows for maximum versatility in a range of applications.Features: Electronic-power-control for greater comfort Anti-vibration system - Reduced vibration for less operator fatigue Torque-limiter

Makita HR3210C Hammer Drill SDS+ Rotary, complete with side handle, depth stop, bit grease and carrying case The Makita HR3210C SDS Plus rotary hammer drill has been developed as a successor model of the HR3000C, featuring low vibration level and lightweight design. It is powered by an 850watt motor, generating 6.4 joules of impact energy which allows it to punch a 32mm hole into concrete with ease. Makita's AVT (Anti-Vibration Technology) protects both the operator from physical injury and the machine from mechanical and electrical overload. A built-in balancer moves in the opposite direction from the piston providing the hammer action, thus cancelling out the majority of vibration being

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.It has a soft start operation to ensure a smooth and even start every time and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel