Electric Jigsaws

The DEWALT EXTREME T Shank Metal Cutting Blades deliver superior surface finish & precision with long cutting life. The blade is 50% stronger reducing blade breakage and wandering with a reinforced tooth design for greater precision and longer blade life. The bi-metal construction provides enhanced flexibility and durability. Supplied in a pack of 3. DEWALT DT2150 EXTREME T Shank Metal Cutting Blades for fast cuts in steel up to 3mm thick. Also for aluminium, copper, brass and other soft metals to 3mm thick.

The Bosch 2607010630 X-Pro 10 Piece Jigsaw Blade Set is selection pack for wood and metal cutting. This set is suitable for straight cutting, fine cutting and tight curves in wood. - 10 high quality wood and metal cutting blades - Fine and coarse cutting - Tight curve cutting in wood - Supplied in storage case Contains 2 x Softwood Blades T119BO - 2 to 15mm thickness for curve cuts 2 x Softwood Blades T119B - 2 to 15mm thickness for straight cutting 2 x Softwood Blades T111C - 4 to 50mm thickness for quick cut 1 x Thin sheet metal Blade T218A - 1 to 3mm thickness for curve cuts 1 x Very thin sheet metal Blade T118G - 0.5 to 1.5mm thickness 1 x Thin sheet metal Blade T118A - 1 to 3mm thickness …

The DEWALT XPC Bi-Metal Aluminium Jigsaw Blades provide fast accurate cutting in aluminium. The XPC Jigsaw blades have a new optimised tooth angle which provides long life and clean tear-free cuts at high speeds. With a plunge point tip design for easy plunge cutting with no kick-back and extra long life bi-metal blades which provide up to twice the number of cuts of standard HCS blades. Specification Material BiM. Type T127DF. Cutting Thickness 30mm. Blade Length 100mm. Working Length 75mm.

The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including …

The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including …

The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including …

The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including …

The Faithfull Diamond Grit Jigsaw Blade is designed for tough cutting situations. The tough braze bonded diamond edge and high-grade steel blade blank give an extremely long lifespan. The blade is extremely robust with minimal diamond loss or dulling. It also features patented Reduced Kerf Technology (RKT) for fast cutting. It will easily cut through Cast Iron, Plasterboard, Cement Board, Fibreglass, Carbon Fibre, Composites, Ceramic, Porcelain, Granite and Stucco. Cut surfaces require little secondary finishing. Specification: Blade Thickness: 0.8mmBlade Length: 76mmAdditional Information:• Popular Ref: T76D• Pack Size: 1• Tooth Pitch: diamond• Working Length: 50mm• …

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal. Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel 1.5-3mm, plastic 1.5-30mm, fiberglass 1-20mm. Length: 100mm. Pitch: 24. Supplied in a pack of 5.

T101 A Clean for PC Jigsaw Blade delivers clean straight cuts in plastics. Precision-ground teeth with taper-ground body produce clean results when cutting Perspex and polycarbonate between 2 - 20mm. Tooth geometry designed to prevent melting when cutting polycarbonate sheets. Fully hardened, high-grade, high-speed steel appropriate for cutting abrasive thermoplastic materials.

T 101 AOF Special for Laminate Jigsaw Blade delivers clean curved cuts in wood. Precision-ground teeth with taper-ground body cut cleanly while a narrow blade width enables tight turns for curved cuts. Bi-metal, fully hardened high-speed steel tooth strip and highly elastic carbon steel body for cutting laminate flooring. Very fine tooth pitch (1.4 mm) and cuts thin woodworking materials with 1.5-15 mm thickness. Pointed tooth design reduces tear-out.

Laminate jigsaw blades capable of cutting a variety of wooden materials with a 2-30mm thickness The Bosch T101BIF-2608636431 Special for Laminate Pack of 5 Jigsaw Blades delivers clean straight cuts in wood. Their precision-ground teeth with taper-ground body cut cleanly. Made from BIM (bi-metal), its fully hardened HSS (high-speed steel) tooth strip is bonded with its highly elastic HCS (high carbon steel) body, making the blade appropriate for cutting hard materials such as laminate flooring. Additionally, a pointed tooth design reduces tear-out. It is equipped with a fine-tooth pitch (1.7 mm) and cuts a variety of solid wood materials with 2-30 mm thickness. For use with jigsaws with T-Shank …

T301 CD Clean for Wood Jigsaw Blade delivers clean straight cuts in wood. Precision-ground teeth with taper-ground body produce clean results. High carbon steel blade material is appropriate for cutting softwood and non-abrasive woodworking materials. Medium tooth pitch (3 mm) and long length (117 mm) cut wooden materials with 10-65 mm thickness. For use with jigsaws with T-Shank clamping systems.

Bosch T321BF Speed for Metal Jigsaw Blades (5 Pack) The Bosch 2608636707 is a 5 pack of T 321 BF Speed for Metal Jigsaw Blades delivering fast straight cuts in metal. The patented tooth geometry of aggressive and robust teeth further increases cutting speeds. With Bi-metal, fully hardened high-speed steel tooth strip and highly elastic carbon steel body make the blade breakproof. Fine tooth pitch cuts medium-thick metal pipes and profiles, long-length blade cuts pipes and profiles. Areas of application are: medium-thick sheet metals, perforated sheet metals (2.5-6 mm), sandwich materials (

These universal jigsaw blades will effortlessly cut through a variety of materials like wood, plastic and sheet metal Features:  
- BIM, side set, milled 
- Construction timber with nails (

A pack of 10 assorted coarse and fine Dewalt jigsaw blades for wood, laminate and plastic The Dewalt DT2290 Set have a mixture of coarse, fine blades for cutting through various materials including wood, wood laminates and plastics. Also includes 2 extra thick jigsaw blades designed specifically for fast straight cuts through wood up to 60mm thick. Contains:
- 2 x HCS 105-1
- 2 x HCS 101-2
- 1 x HCS 130-1
- 2 x HCS 116-01
- 1 x HCS 127-01
- 2 x HCS 116-2 Specification:
- Weight: 0.5kg