Other for Fishing

OSP Wide Measure Mesh 70 cm Orange (7729) Brand: OSP Model: OSP Wide Measure Mesh Type: OSP Wide Measure Mesh Dimensions: 70 cm Weight: Color: Orange Features: N/A

OSP Wide Measure Mesh 70 cm Lure Design (7736) Brand: OSP Model: OSP Wide Measure Mesh Type: OSP Wide Measure Mesh Dimensions: 70 cm Weight: Color: Design Features: N/A

Fuji C-DGPS Size 250-25 Cork Rod Handle (6232) Brand: Fuji Model: C-DGPS Part Type: Rod Handle Length: 250 mm Height: N/A Diameter: Inner : 8 mm Features: N/A Color: N/A Other Measurements: Refer to diagram

The ANATEC 6V 12A Battery in black is a powerful and reliable battery designed to provide reliable performance for various applications. This battery is a perfect fit for a wide range of devices, including toys, alarm systems, solar power systems, electric fences, and more.The ANATEC 6V 12A Battery is built with high-quality materials that ensure long-lasting performance and durability. The battery's black exterior serves as a protective cover that safeguards the inner parts from damage and moisture, which can greatly affect the battery's performance.At 6 volts and a capacity of 12A, this battery is capable of powering your devices for more extended periods than regular batteries without compromising …

Features:- Stainless steel type SANDVIK MATERIAL TECHNOLOGY, single barb AISI 316 hardenedp with carbone.- Short spear point for a better impact resistance, heat treatment to increase hardnessand bending resistance by 20%. - Shark fins type low pin AISI 316 hardened with carbone.

Features:- Stainless steel type SANDVIK MATERIAL TECHNOLOGY, single barb AISI 316 hardenedp with carbone.- Short spear point for a better impact resistance, heat treatment to increase hardnessand bending resistance by 20%. - Shark fins type low pin AISI 316 hardened with carbone.

Features:- Stainless steel type SANDVIK MATERIAL TECHNOLOGY, single barb AISI 316 hardenedp with carbone.- Short spear point for a better impact resistance, heat treatment to increase hardnessand bending resistance by 20%. - Shark fins type low pin AISI 316 hardened with carbone.

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft single barb with cone 8 mm.

It is NOT the full reel, it is only the Spare Spool for Biomaster SW Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

Capture jaw - aka lipgrip (lipgrip). A special device for pulling a pike out of the water, which has grabbed a large bait, equipped with tees. It is also useful for C&R devotees. (catch-release), as it minimally injures the fish. The principle of operation is based on the tight closing of the metal arms on the lower jaw of the fish. The bone of the lower jaw is strong enough so that the fish will not break off and injure it. A little troublesome institution of the device in the mouth of a beating fish is more than compensated by the fact that you do not get your hands dirty, do not injure the fish and do not disentangle the tees from the net of the landing net.

Made from the best high tensile spring steel drawn to 2050 N/mm (53 Rockwell).Special coating for ultimate corrosion resistance!Round notches (can be used with Dyneema wishbones) or shark fins with Pins or AMERICA style.

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

PATHOS Shafts arc made with the best stainless steel of the market, the SANDVIK They are also heat treated to increase the hardness and to avoid bending, shafts arc manufactured using computer numeric machine (CNC)NOTCHES SHARK FIN THREAD:In all exept thread we have lltopper or 2 Hoppers available ol 5 and 7 cm Pathos designed shark fin Tab. is smoot finished In order to be used with dynema wishbone. ve use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs. Small. Medium, and large Medium and Large, can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point

PATHOS Shafts arc made with the best stainless steel of the market, the SANDVIK They are also heat treated to increase the hardness and to avoid bending, shafts arc manufactured using computer numeric machine (CNC)NOTCHES SHARK FIN THREAD:In all exept thread we have lltopper or 2 Hoppers available ol 5 and 7 cm Pathos designed shark fin Tab. is smoot finished In order to be used with dynema wishbone. ve use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs. Small. Medium, and large Medium and Large, can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point