Other for Fishing

100% Stainless steelCan be used on wood gunsThe quickest, most sensitive and most silent trigger mech in the market today, completely independent from the power of the rubbers on the shaft and also the tension made on the line releaseYou can use it with multiple rubbers without any change on the sensitivity of your finger to shoot the gun

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

Daiwa Pliers Split Ring V220H 220mm (5058) Brand: Daiwa Model: Pliers Split Ring V220H Type: Pliers Split Ring V220H Dimensions: 220 mm Weight: 100 grams Color: Black Features: N/A

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 75 mm Pole.Tahitian spearshaft sharkfin double barb 7.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft single barb with cone 8 mm.

The name AMBER PURE identifies a series of rubbers studied specially to expire with the requirements of the assemblies as rapid made-to-measure rubber. Its composition is the most elastic of the whole range Pure and its section consists of an only one composed in pure latex of Malaysia without no type of ´´load´´ or additive (shore 36-38 º) vulcanized to the native without process acceleration, for a maximum elastic action.Its composition 100 % pure does that they have an excellent elasticity that is translated in an extremely homogeneous accompaniment of the rod, increasing of this form the scope of the shot and the inertia and capacity of penetration of the same one, with a difficulty of lo…

It is NOT the full reel, it is only the Spare Spool for Biomaster Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

It is NOT the full reel, it is only the Spare Spool for Black Gold Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

Pathos. Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).

PATHOS Shafts arc made with the best stainless steel of the market, the SANDVIK They are also heat treated to increase the hardness and to avoid bending, shafts arc manufactured using computer numeric machine (CNC)NOTCHES SHARK FIN THREAD:In all exept thread we have lltopper or 2 Hoppers available ol 5 and 7 cm Pathos designed shark fin Tab. is smoot finished In order to be used with dynema wishbone. ve use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs. Small. Medium, and large Medium and Large, can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point

PATHOS Shafts arc made with the best stainless steel of the market, the SANDVIK They are also heat treated to increase the hardness and to avoid bending, shafts arc manufactured using computer numeric machine (CNC)NOTCHES SHARK FIN THREAD:In all exept thread we have lltopper or 2 Hoppers available ol 5 and 7 cm Pathos designed shark fin Tab. is smoot finished In order to be used with dynema wishbone. ve use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs. Small. Medium, and large Medium and Large, can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point

- DURABLE MATERIAL: This tool is crafted with quality metal material, high strength, anti-rust, durable - FIRMLY CLAMP: The tip can clamp the hook firmly, fits for various of sizes of hook - HANDLE DESIGN: With a handle for the axle to roll line on the hook - EASY TO USE: The clamp can be clamped on table for stable operation, and can help you easily make a fly lure tightly fastened to a hook - GREAT TOOLS: Useful tools for you to make your own fly lure, very convenient and practical!

The AZ TRADING IGFA Tape Measure is a high-quality fishing equipment tool designed specifically for anglers. It is built to meet the standards set by the International Game Fish Association (IGFA), ensuring its accuracy and durability.This tape measure is crafted with precision and attention to detail, making it an essential tool for any fishing enthusiast. It features a sturdy construction, consisting of a durable and rust-resistant metal casing that protects the tape inside. The tape is made of a high-grade material that is both flexible and long-lasting.The AZ TRADING IGFA Tape Measure is designed to be compact and portable, allowing anglers to easily carry it in their tackle boxes or fishing …

H. DESSAULT is a well-known brand in the spearfishing industry, producing high-quality equipment and accessories for divers. The C4 Shark Fins 7 mm Tricuspide 1 Fin Shaft is a testament to the brand's commitment to innovation and performance. These fins are designed to provide powerful and efficient propulsion in the water, allowing divers to move quickly and easily through rough currents. In addition to fins, H.DESSAULT also produces a range of spearguns and spearshafts. Their spearguns are made from durable materials and are designed to be easy to use and accurate, while their spearshafts are engineered to provide maximum penetration and minimal recoil. Overall, H.DESSAULT is a trusted brand …

Fishing reels - Accessories for reels.SEANOX Spool For 686001 Coil.Reel only for small winder- ø 160mm- width 130mm- stainless steel twist handle included.

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s