Other for Fishing

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 8 mm Pole.Tahitian spearshaft sharkfin double barb with cone 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft single barb with cone 8 mm.

The name AMBER PURE identifies a series of rubbers studied specially to expire with the requirements of the assemblies as rapid made-to-measure rubber.Its composition is the most elastic of the whole range Pure and its section consists of an only one composed in pure latex of Malaysia without no type of load or additive (shore 36-38 º) vulcanized to the native without process acceleration, for a maximum elastic action.Its composition 100 % pure does that they have an excellent elasticity that is translated in an extremely homogeneous accompaniment of the rod, increasing of this form the scope of the shot and the inertia and capacity of penetration of the same one, with a difficulty of load r…

The name AMBER PURE identifies a series of rubbers studied specially to expire with the requirements of the assemblies as rapid made-to-measure rubber.Its composition is the most elastic of the whole range Pure and its section consists of an only one composed in pure latex of Malaysia without no type of load or additive (shore 36-38 º) vulcanized to the native without process acceleration, for a maximum elastic action.Its composition 100 % pure does that they have an excellent elasticity that is translated in an extremely homogeneous accompaniment of the rod, increasing of this form the scope of the shot and the inertia and capacity of penetration of the same one, with a difficulty of load r…

The DAIWA Saltiga 2022 2215HL Spare Spool Blue / Gold is a high-quality spare spool designed to fit the DAIWA Saltiga 2022 fishing reel series. This spare spool is crafted with precision and durability in mind, making it a perfect accessory for anglers who want to maximize their fishing experience.The spool features a stunning blue and gold color combination, giving it an attractive and stylish look. It is made from premium materials that are resistant to corrosion, ensuring its longevity and reliability even in harsh saltwater environments. The spool is also lightweight, allowing for smooth and effortless casting and retrieval of the fishing line.Designed to provide exceptional performance,…

It is NOT the full reel, it is only the Spare Spool for Black Gold Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

The Slimsada'S Pocket Clip May Be The Least Used Feature Because You Won'T Want To Put It Away. Besides Being A Solid Workhorse, The Slimsada Has The Trifecta Of Fidget Factor.Features:- Stonewash D2 Blade- Olive Linen Micarta Scale- Exposed Barrels- Thumbhole Deployment- Patented Pinch Plate- Pocket ClipSpecifications:- Overall Length: 8.03´´- Closed Length: 4.55´´- Blade Length: 3.47´´- Overall Weight: 2.68 Oz.

Cayman Carbon complete handle.

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik tempered stainless steel, considered the best in the market for Spearfishing use - 190 Kg / Cm2.2 consecutive HEAVY DUTY barbs for maximum safety holding the fish, if it runs off the 1st one, it will be held on the 2nd one! Available with 2 different types of shark fins - Euro (smaller to pass on closed muzzles) and America (bigger with a Hole to hold the shaft line) in 7mm or 7.5mm.

Pathos. Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).

Pathos. Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).

Pathos. Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).

PATHOS Shafts arc made with the best stainless steel of the market, the SANDVIK They are also heat treated to increase the hardness and to avoid bending, shafts arc manufactured using computer numeric machine (CNC)NOTCHES SHARK FIN THREAD:In all exept thread we have lltopper or 2 Hoppers available ol 5 and 7 cm Pathos designed shark fin Tab. is smoot finished In order to be used with dynema wishbone. ve use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs. Small. Medium, and large Medium and Large, can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point

EVA 46 Winder.Specifications:- Dimensions: 33X27X9

Stainless steel crowns for handmade lures. Sold in blister of 5 or 100 units

Stainless steel crowns for handmade lures. Sold in blister of 5 or 100 units

Spearguns - Components.Target Complete Handle.

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 8 mm Pole.Tahitian spearshaft sharkfin double barb 8 mm.

Specifications:- Acier inoxydable 18/8-RESISTANCE 180 daN Double Arillon 75 MM-3- Stainless stell 18/8-Strength 180 daN- Two 75 mm barbs-3 fins for 140 cm length and over