Other for Fishing

It is NOT the full reel, it is only the Spare Spool for Certate G LT 2019 Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

It is NOT the full reel, it is only the Spare Spool for Saltiga 2015 15HL-HLSJ Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

The ultimate saltwater performer, the Tesoro features an oversized brass drive gear for strength and durability – further enhanced by the Gearing Stabilization Design for improved gear alignment. The IPX-7 rated Hydro Sealed Body protects against full water submersion and splashing. Within the Tesoro's full-Alumilite body resides a Dual Force Drag system with a whopping 29,9 kgs of max drag power.Features:- Full-Alumilite Body & Sideplate- IPX-7 Rated Hydro Sealed Body CFR: Cyclonic Flow Rotor- Carbonite High-Output Drag with Cal's Drag Grease on Full Dual Force Drag- 12HPB + 1RB Corrosion-Resistant Stainless Steel Bearings- Dual Anti-Reverse System for Maximum Strength and Reliability- Machined Al…

Spearguns - Spearshafts.PICASSO Inox 7 mm Threaded.Thread m7-7 mm made in stainless steel with shark fins.

Picasso Roller complete muzzle100% Stainless steel ball bearingsFits any rubbers from 14mm to 20mmFor 28mm external diameter tubes with or without rail

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Prox PX8062GS Fish Grip Handling Tool Regular 20 cm Gunsmoke (4648) Brand: Prox Model: PX8062GS Fish Grip Type: PX8062GS Fish Grip Dimensions: 20 cm Weight: Color: Gunsmoke Features: N/A

The Cuda freshwater tweezers should not be missing from the bag of anglers.In addition to being used as traditional tweezers, i.e.for removing a hook from the mouth of a predatory fish, it is also suitable for cutting monofilament line thanks to the designed, toothed line cutting part.It is characterized by a stainless steel construction.It has a non-slip grip.The holes designed for the fingers are oversized, so they provide a comfortable grip and do not cut your fingers.There is a hook sharpener on the side.

The concept behind the Dyamant shaft.It´s a very hydrodynamic shaft, well finished, built with top level materials, rigid and versatile, with lowered pins, suitable also for ´closed´ and ´open´ head spearguns like traditonal arbaete.We suggest, for big preys, to tie the line on the bridge, in front of the preload fin.Dyamant shaft technical description.The Dyamant shaft is made in 17.4 PH rebored.Is made by 17.4 PH bars certificated by steelwork.straight and smooth.The Dyamant shaft is C.N.C.machined.The Dyamant shaft has 3 fins, 2 backwards (at 60/90 mm from tang) and one for preloadinga (at 200 mm from tang), for the 6.25 and 6.5 diameters, 4 fins, 3 backwards (at 60/90/120 mm from tang) and a…

The concept of Blackout shaft.It´s a shaft very strong, with top level finishing as well as all the Hunt shafts.Its name comes from the maximum stopping power on the fish (thanks to the ´true´ tricuspid point and the barb not recessed, if hit in its vital points you have more chances to kill the fish with one shot), maximum hold of the barb on the fish, penetrating as a double barb thanks also to the not sticking out welded pin.The barb is very heavy abnd since it´s ´under´, it alway open itself.Technical description of Blackout shaft:- The Blackout shaft is made in 17.4 PH rebored- Is made by 17.4 PH bars certificated by steelwork, straight and smooth- The Blackout shaft is C.N.C. machined- The Bl…

At Mv Spools we design and produce all kinds of accessories used mainly in the Carpfishing & Surfcasting modalities.Our products are designed with 3D CAD-CAM software, thus finding the perfect balance to optimize the cast to the maximum and reducing the friction of the thread to a sliding coefficient of practically 0 in order to achieve the greatest distances in the cast due to its angles at the edges.Original brake plug compatible.Our replacement spools are compatible with the original brake cap.Customize your reel:Available a wide range of colors and accessories for your Surfcasting & Carpfishing reels.Designed for competitiion, treated materials for a greater line slip and a moore fluid thread …

At Mv Spools we design and produce all kinds of accessories used mainly in the Carpfishing & Surfcasting modalities.Our products are designed with 3D CAD-CAM software, thus finding the perfect balance to optimize the cast to the maximum and reducing the friction of the thread to a sliding coefficient of practically 0 in order to achieve the greatest distances in the cast due to its angles at the edges.Original brake plug compatible.Our replacement spools are compatible with the original brake cap.Customize your reel:Available a wide range of colors and accessories for your Surfcasting & Carpfishing reels.Designed for competitiion, treated materials for a greater line slip and a moore fluid thread …

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 75 mm Pole.Tahitian spearshaft sharkfin double barb 7.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 75 mm Pole.Tahitian spearshaft sharkfin double barb with cone 7.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 8 mm Pole.Tahitian spearshaft sharkfin double barb with cone 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb 8 mm Pole.Tahitian spearshaft single barb 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft single barb with cone 8 mm.