Other for Fishing

Boom 16 mm Slings.Picasso only uses pure latex to produce his BOOM rubbers.Very soft to pull, but very powerful and progressive.Picasso Boom rubbers can be stretched up to 3.5x its resting length!.

Made from the best high tensile spring steel drawn to 1950-2000 MPa (57-58 Rockwell). Special coating for ultimate corrosion resistance!Round notches (can be used with Dyneema wishbones) or shark fins.New Heavy duty Barb on 7mm and 7.5mm, as well as reinforced pin, makes this shaft the best allied when hunting big fish!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

High performance premium black rubber dipped, red coating.Available in diameter 14 / 16 / 18mm.UV UV Protection.Explosive rubber for powerfull shots.Big impact to stun the fish.

The concept behind the Dyamant shaft.It´s a very hydrodynamic shaft, well finished, built with top level materials, rigid and versatile, with lowered pins, suitable also for ´closed´ and ´open´ head spearguns like traditonal arbaete.We suggest, for big preys, to tie the line on the bridge, in front of the preload fin.Dyamant shaft technical description.The Dyamant shaft is made in 17.4 PH rebored.Is made by 17.4 PH bars certificated by steelwork.straight and smooth.The Dyamant shaft is C.N.C.machined.The Dyamant shaft has 3 fins, 2 backwards (at 60/90 mm from tang) and one for preloadinga (at 200 mm from tang), for the 6.25 and 6.5 diameters, 4 fins, 3 backwards (at 60/90/120 mm from tang) and a…

HT inverter Sigal Muzzle + Delrin shroom Lt + Rt for fix the rubber bands.

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 8 mm Pole.Tahitian spearshaft sharkfin double barb 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 8 mm Pole.Tahitian spearshaft sharkfin double barb with cone 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 7 mm Pole.Tahitian spearshaft sharkfin double barb with cone 7 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb 8 mm Pole.Tahitian spearshaft single barb 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft single barb with cone 8 mm.

Spearguns - Spearshafts.SIGALSUB Threaded Tahitian Spearshaft with Sharkfins 8 mm Pole.Threaded tahitian spearshaft with sharkfins 8 mm.

Allestimento Arbalete Pro Kit.Rigging Kit Pro- 400355 monoline tripla forza 6mt+2 sleeves.- 400262 line tightening.- 400317 cymax 50 mt acydine 1,25.

The SALVIMAR Screwed Inox 17-4PH 8.0 mm Pacific spearshaft is a high-quality spearshaft designed for use with spearguns. Made from durable Inox 17-4PH stainless steel, this spearshaft is extremely strong and corrosion-resistant, making it ideal for use in saltwater environments.The spearshaft features a golden finish, giving it a sleek and stylish look. It has a diameter of 8.0 mm, providing plenty of power and penetration for hunting larger fish. The shaft is equipped with screw-in tips, allowing for easy attachment of spearheads and other accessories.This spearshaft is compatible with a variety of spearguns and is suitable for both beginner and experienced spearfishers. Whether you're diving …

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Pathos. Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Threated 17-4p 44hcr of 1600N/mm2. Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rustproofing. The holes for the line are finally polished using sand and pressure, the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are electro welding and have an anti-tiring piece.

HD PRO Spetton spearguns are made from 48/50 HRC heat-treated Sandvik steel, making them very durable, even when struck into the hardest rock.The steel hardness test is performed by penetration with a diamond point. The particularity of this new series is represented by the special welding characteristics of its Shark fins. They are welded with micro-welding laser, with housing, not through, avoiding critical points in its structure.All harpoons are made with 4 Shark fins, 3 of which are grouped in a rear position, while the last one is further away, to aid in loading.All Shark fins have a monofilament hook hole, in order to offer more possibilities for the user. All are polished and finished …

Based on one of the most popular Marttiini knives, the Lynx Lumberjack Carbon, this version is made from easy-to-maintain stainless steel.The handle is made of stained birch. Its surface is slightly textured so you easily get a firm, safe grip of the knife.Specifications:Materials:- Blade Material: Stainless Steel- Handle Material: Birch, Stained- Sheath Material: LeatherDimensions:- Length Of Blade: 11 Cm- Total Length: 22 Cm

Valley Hill Pro AA EX hook Tying Vice (0718) Brand: Valley Hill Model: Pro AA EX hook Tying Vice Type: Pro AA EX hook Tying Vice Dimensions: N/A Weight: Color: N/A Features: N/A